Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are seeking an experienced Software Product Assurance Engineer to manage the quality of our space projects from a software perspective. This role is integral to the Software team, ensuring that our software products meet the highest standards of reliability, performance, and compliance with contractual requirements.
As a Software Product Assurance (SW PA) Engineer, you will hold a crucial position within the Software Team. You will serve as the SW quality focal point for space projects, with a primary focus on the Nyx Earth project. Your duties will encompass a wide range of responsibilities, including but not limited to:
Establishing and maintaining the project's SW PA&S requirements baseline in compliance with applicable NASA/ESA requirements and best market practices.
Developing and implementing a SW Quality Assurance Program in accordance with NASA-STD-8739.8, intended to cover the SW quality activities across all the project lifecycle phases.
Developing, implementing, monitoring, and reviewing SW QA plans.
Conducting independent evaluations of software development processes to ensure compliance with organizational standards and safety requirements.
Participating in the analysis and evaluation of software design, including change impact analysis and regression testing, particularly for COTS software.
Overseeing and participating in verification and validation (V&V) activities according to a defined V&V plan, ensuring traceability of all requirements and exclusion of unauthorized functions.
Supporting Independent Verification and Validation (IV&V) activities, working in coordination with IV&V personnel to mitigate software risks and enhance safety and quality.
Managing SW nonconformities, deviations, alerts, and assessing their impact.
Contributing to the risk management process and managing SW Critical Items.
Managing and applying SW lessons learned.
Planning, conducting and following up on project SW audits.
Overseeing configuration management processes to ensure alignment with approved plans, including identification, status accounting, change control, verification, and delivery.
Ensuring software reliability and maintainability requirements are met and traceable to system requirements.
Conducting software trade studies to ensure consideration of safety, reliability, maintainability, and quality assurance requirements.
Supporting HSIA analysis.
Overseeing SW integration with hardware.
In the role of SW Product Assurance Engineer ideally, you will have the following:
A bachelor in engineering or technical sciences
Experience in software assurance, quality assurance, or a related field, particularly within aerospace, aviation or defense industries.
Strong analytical skills and experience with software lifecycle evaluation, configuration management, and V&V activities.
Programming Languages: Proficiency in C/C++ and Python for software development and scripting tasks.
Proficiency in managing non-conformances and corrective actions.
Excellent communication skills and the ability to work independently as well as part of a multidisciplinary team.
Ability to conduct rigorous audits, evaluations, and reviews.
Detail and solution-oriented mindset with a strong ability to work independently,
Demonstrated ability to thrive in a team environment while exhibiting strong leadership skills,
Working fluency in English.
Additional assets:
Familiarity with NASA software assurance standards and requirements, especially NASA-STD-8739.8 and NASA-GB-8719.13
Version Control Systems: Expertise in using Git for source code management. Familiarity with GitHub or GitLab for code sharing, issue tracking, collaboration, and version tracking.
Continuous Integration/Continuous Deployment (CI/CD): Experience with CI/CD pipelines to automate testing and deployment of software updates. Familiarity with tools like Jenkins or GitLab CI.
Software Testing: Knowledge of software testing frameworks and automated testing tools (e.g. googletest, gmock).
Static Code Analysis: Experience with tools like SonarQube or Coverity analyze code quality.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We want you as a talented Flight Software Engineer to help us in our mission by developing and testing critical software responsible for the operation of the Nyx spacecraft.
*Applications at all seniority levels are considered.
In your capacity as a Flight Software Engineer, your role will be continuously evolving, but day to day your duties will include:
Own the requirements for a specific sub-system
Responsible for implementation of Flight software modules (Sub-system)
Responsible for writing clean unit tests
Collaborate with other teams (e.g. Avionics, Propulsion)
Contribute to a high-fidelity spacecraft simulator and collaborate with the GNC team
Responsible for Integrated tests
Strong C++ skills (C++14 and above)
C / Embedded C experience
Strong Python skills
Familiarity with debuggers (GDB, LLDB)
Good understanding of math & physics
Focus on detail, quality, and testing
Experience with CI/CD systems and build systems
Knowledge of safety critical and real-time critical software and familiarity with RTOS
Good understanding of communication protocols such as: TCP/IP, UART, CAN Bus and serialization
Experience with automotive or flight software frameworks
Experience with industry standards such as AUTOSAR, ECSS, DO-178
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
Your Opportunity
We’re always excited to meet talented people who share our passion for space, innovation, and teamwork. Even if there isn’t an open role that perfectly fits your experience right now, we encourage you to apply if you feel The Exploration Company is where you belong. We're looking for pioneers ready to take on impactful challenges and contribute to our journey in making space accessible to all.
Areas of Interest
In your application, please let us know which of the following areas aligns most with your expertise and passion:
Engineering (Avionics, Communication, Power, Flight Software, GNC, Propulsion, System, Vehicle Design)
AIT (Assembly, Integration & Testing)
Business (Strategy, Operations, Growth)
Finance (FP&A, Accounting, Investment Analysis)
Program Management
US Operations (Spaceport, Regulatory, Logistics)
What We Look For
A deep passion for space exploration and the potential to contribute in impactful ways.
A mindset focused on collaboration, innovation, and problem-solving.
A background that reflects your skills and experience in the areas mentioned above.
A desire to join an enthusiastic, dedicated, and diverse team shaping the future of space.
What You’ll Get
The chance to be a part of one of the most exciting space programs in the world.
Opportunities for professional growth in a dynamic, cross-functional environment.
A workplace that values creativity, initiative, and teamwork.
Flexible working options and an international team spread across Europe and the USA.
Please note that if your profile doesn't match an open position at the moment, we may refer you to another opportunity within our company. Alternatively, with your consent, we can store your information and contact you when a suitable role becomes available.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are looking for an Avionics Systems Engineer to support the design, development, integration, and validation of spacecraft avionics systems. The role focuses on delivering robust and reliable electronic systems for data handling, communications, and control across all mission phases.
The engineer will contribute to system architecture definition, interface management, verification activities, and requirements engineering, while working closely with multidisciplinary teams and external stakeholders. In this role, you might be assigned to different avionics systems of the spacecraft.
Define and develop avionics system architectures, including electronics, data handling, and communication functions.
Ensure end-to-end consistency of data flows, interfaces, and system-level requirements.
Support selection and definition of avionics equipment, computing platforms, sensors, and communication hardware.
Contribute to spacecraft-level trade-offs between performance, reliability, mass, power, and cost.
Define onboard and ground-related communication and data handling concepts.
Support implementation of telemetry, telecommand, and data distribution architectures.
Ensure reliable data acquisition, processing, storage, and transmission under mission constraints.
Contribute to bandwidth, timing, and data budget analyses.
Define and manage interfaces between avionics and other spacecraft subsystems (power, propulsion, GNC, payload, etc.).
Ensure compatibility between spacecraft, launch vehicle, and ground segment interfaces.
Coordinate interface definitions with internal teams, suppliers, and external stakeholders.
Strong ability to technically present, defend, and substantiate avionics subsystem designs and verification evidence with external regulatory and certification authorities, including NASA, ESA, and other government agencies, supporting spacecraft qualification, safety, and flight certification.
Define and support verification and validation strategies for avionics systems.
Participate in simulation, hardware-in-the-loop (HIL), and system-level testing activities.
Analyze test results, identify anomalies, and drive corrective actions.
Ensure compliance with system performance and reliability requirements.
Capture, analyze, and manage system and subsystem requirements.
Ensure full traceability from mission objectives to implementation and validation.
Contribute to system documentation, including specifications, interface control documents, and test plans.
Ensure compliance with applicable space standards and engineering best practices.
Work closely with software, hardware, systems, operations, and mission engineering teams.
Participate in design reviews, technical exchanges, and system trade-off discussions.
Support alignment with external partners, suppliers, and customers.
Contribute to integration campaigns, launch preparation, and mission operations support.
Degree in Electrical Engineering, Aerospace Engineering, Systems Engineering, or equivalent.
+3 years experience in avionics systems, electronics, embedded systems, or spacecraft engineering.
Strong understanding of:
Electronic and embedded system architectures
Communication and data handling principles
System integration and interface management
Experience with requirements engineering and system lifecycle development.
Knowledge of verification and validation methods, including testing and simulation.
Strong analytical and problem-solving skills.
Ability to work in multidisciplinary engineering environments.
Experience in spacecraft avionics or aerospace systems.
Familiarity with space communication and data standards (e.g., CCSDS).
Experience with HIL testing, simulation environments, or digital engineering tools.
Exposure to safety-critical or mission-critical system development.
Experience working in international or multi-stakeholder engineering teams.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We want you as a talented FPGA engineer to help us in our mission by developing the electronic systems we need for our capsule to fly.
You will be successful in this role if you are able to help us:
Write VHDL code to validate all needed functions in the FPGAs
Provide inputs to team in charge designing digital circuit boards with FPGAs and Microcontrollers for space environment
Design and validation of digital interfaces circuitry (CAN, RS422 UART, I2C, SPI, Spacewire, etc.)
Write first test software for the system to validate interfaces and hardware functions
Validating the design and ensuring failure tolerance and radiation tolerance of the functions
In your capacity as a Digital Electronics Engineer, your role will be continuously evolving, but day to day your duties will include:
Digital electronics architecture design
FPGA design and verification
Close working together with Systems Engineers to define capabilities and requirements of the digital functionality
Writing first test software for the system to validate interfaces and hardware functions
Full test cycle from first power up of prototypes to serial test concept of flight hardware
Creation and adaptation of test scripts in Python for test automation
In the role of Digital Electronics Engineer ideally, you will have the following:
Finished bachelor's or master's degree in Electrical Engineering, Telecommunications Engineering, Embedded Systems or similar (can be substituted with several years of relevant work experience)
Relevant work experience in FPGA / SoC design and / or verification
Experience using Microchip Libero or Xilinx Vivado
Solid VHDL / Verilog knowledge
Embedded software knowledge (MCUs, soft-cores)
Knowledge of VUnit/UVVM is a plus
Hands-on mentality working in the laboratory (Soldering, prototype board debugging, etc.)
Knowledge of radiation effects and radiation related failure mechanisms in electronic circuits is a plus (Single Event Upsets, Single Event Transients, etc.)
Knowledge of environmental qualification and relevant standards ECSS / NASA-HBK / NASA -CBCS / MIL-STD for programming, Interfaces, etc. is a plus.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
As we are working on the detailed design of our Nyx Earth version, which will dock to the space stations around the Earth, we are currently seeking a Project Manager to manage Critical Mechanisms in the execution of the Earth Missions.
We are looking for a highly experienced, dynamic and skilled Project Manager to execute our contracts with the highest standards of schedule, cost and risk tracking.
You and the Program team will interact with highly skilled people composed of Technical, Operations, Quality and Procurement Leads, with the common goal of delivering on time, on cost and on quality the vehicles and associated services.
We expect you to have the most detailed knowledge of the schedule and cost status, with a clear understanding of the technical progress status, to make sure that the activities prioritization is fully in line with the goals set by the Chief Program Officer for your perimeter.
We expect you to push and challenge the team in the most constructive way to support them in giving their best to meet the company goals, while listening to their needs and finding compromises.
*Qualified candidates working remotely from Belgium may be considered for this position.
You will closely monitor the risks of the projects to anticipate and avoid potential crisis.
You will report to the Chief Program Officer of the company, who is also the Program Manager for Nyx Earth.
In your capacity as a Nyx Earth Mechanism Project Manager , your role will be continuously evolving, but day to day your duties will include:
Project leadership:
Lead and manage, providing guidance, motivation, and strategic direction.
Define project goals, scope, and deliverables in collaboration with key stakeholders.
Technical oversight:
Build the work logic, including the development and qualification approach in collaboration with the system technical responsible
Frequent travel to Belgium
Collaborate with engineering teams to ensure compliance with technical specifications and project requirements
Monitor technological advancements and integrate innovative solutions into the project.
Budget and resource management:
Develop and manage project budgets, ensuring efficient resource allocation.
Work closely with finance and procurement teams to acquire necessary resources and materials.
Timeline and milestone tracking:
Develop and maintain a detailed project timeline, setting clear milestones and deadlines.
Regularly monitor progress, identifying potential risks, and implementing corrective actions as needed.
Collaboration and communication:
Foster effective communication within the project team and with external stakeholders.
Coordinate with cross-functional teams, including mission control, ground operations, and external partners.
Regulatory compliance:
Ensure adherence to all relevant space exploration regulations and standards.
Collaborate with legal and compliance teams to address any regulatory issues.
Risk management:
Identify and assess project risks, developing mitigation strategies to minimize potential obstacles.
Implement proactive measures to address unforeseen challenges and ensure project success.
Quality assurance:
In collaboration with the quality responsible, establish and enforce rigorous quality control processes to ensure the reliability and safety of the orbital space vehicle.
Collaborate with quality assurance teams to implement best practices.
Documentation:
Maintain comprehensive project documentation, including design specifications, test plans, and progress reports.
Ensure all project-related information is well-documented for future reference.
Implement a thorough deliverable management process
Master’s degree in Aerospace Engineering
Space Mechanism project experience is essential
6+ years experience in Project management
Proven experience managing complex space exploration mechanism projects
Strong technical background in spacecraft design and space systems engineering.
Excellent leadership and interpersonal skills, with the ability to motivate and manage multidisciplinary teams.
Demonstrated experience in budget management, resource allocation, and risk mitigation.
Knowledge of relevant space exploration regulations and standards.
Exceptional problem-solving and decision-making skills.
Excellent written and verbal communication skills.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are looking for an experienced and hands-on Principal Flight Software Engineer (Team Lead) to lead the development at one of the key teams working on the Flight Software stack for Nyx. In this critical role, you will guide a team of talented engineers in building and validating the software systems that control and operate the spacecraft: from launch to docking, re-entry, and recovery.
You will combine deep technical expertise with strong leadership to deliver high-reliability software under tight mission timelines. You will collaborate with the other Flight Software teams and the Flight Software Lead to drive architectural decisions, enforce rigorous testing standards, and foster a culture of ownership, simulation-driven development, and cross-functional collaboration with other subsystems such as GNC, avionics, propulsion, and mission operations.
This is a high-impact leadership position where your decisions directly influence mission success.
Lead and mentor a high-performing team of flight software engineers in the design, implementation, testing, and integration of spacecraft software.
Own the technical roadmap and execution for flight software, including architecture, modularity, and interfaces across avionics and vehicle subsystems.
Set high standards for code quality, test coverage, simulation fidelity, and system robustness.
Drive development in modern C++ (C++17 or newer) and Python, enabling safe and efficient spacecraft operations in real-time environments.
Oversee the development of test infrastructure, including unit, integration, and hardware-in-the-loop (HIL) testing, to ensure flight readiness.
Own key areas of the Nyx Flight Software, such as Simulation, Embedded software and firmware, specific subsystems… in accordance with your experience and expertise.
Collaborate closely with teams across your team key stakeholders, for example systems engineering, GNC, propulsion, avionics, and mission operations to define requirements, resolve interface challenges, and validate end-to-end behavior.
Participate in and lead code reviews, software audits, flight software simulations, and mission rehearsals.
Strong proficiency in modern C (Embedded/Firmware) or C++ (C++17 or newer, spacecraft software).
Python experience.
Experience with real-time systems, embedded development, simulation, or spacecraft software.
Demonstrated ability to take ownership of complex technical problems and drive them to resolution.
Familiarity with software testing methodologies and simulation tools.
Excellent cross-disciplinary communication and collaboration skills.
Good understanding of math & physics.
Focus on detail, quality, and testing.
Experience with CI/CD systems and build systems in general. Bazel is a plus.
Knowledge of safety critical and real-time critical software and familiarity with RTOS.
Good understanding of communication protocols such as: TCP/IP, UART, CAN Bus and serialization.
Experience with automotive or flight software frameworks.
Background in orbital mechanics, spacecraft systems, simulation, or space mission lifecycle.
Experience with industry standards such as AUTOSAR, ECSS, DO-178.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are looking for an Avionics Systems Engineer to support the design, development, integration, and validation of spacecraft avionics systems. The role focuses on delivering robust and reliable electronic systems for data handling, communications, and control across all mission phases.
The engineer will contribute to system architecture definition, interface management, verification activities, and requirements engineering, while working closely with multidisciplinary teams and external stakeholders. In this role, you might be assigned to different avionics systems of the spacecraft.
Define and develop avionics system architectures, including electronics, data handling, and communication functions.
Ensure end-to-end consistency of data flows, interfaces, and system-level requirements.
Support selection and definition of avionics equipment, computing platforms, sensors, and communication hardware.
Contribute to spacecraft-level trade-offs between performance, reliability, mass, power, and cost.
Define onboard and ground-related communication and data handling concepts.
Support implementation of telemetry, telecommand, and data distribution architectures.
Ensure reliable data acquisition, processing, storage, and transmission under mission constraints.
Contribute to bandwidth, timing, and data budget analyses.
Define and manage interfaces between avionics and other spacecraft subsystems (power, propulsion, GNC, payload, etc.).
Ensure compatibility between spacecraft, launch vehicle, and ground segment interfaces.
Coordinate interface definitions with internal teams, suppliers, and external stakeholders.
Strong ability to technically present, defend, and substantiate avionics subsystem designs and verification evidence with external regulatory and certification authorities, including NASA, ESA, and other government agencies, supporting spacecraft qualification, safety, and flight certification.
Define and support verification and validation strategies for avionics systems.
Participate in simulation, hardware-in-the-loop (HIL), and system-level testing activities.
Analyze test results, identify anomalies, and drive corrective actions.
Ensure compliance with system performance and reliability requirements.
Capture, analyze, and manage system and subsystem requirements.
Ensure full traceability from mission objectives to implementation and validation.
Contribute to system documentation, including specifications, interface control documents, and test plans.
Ensure compliance with applicable space standards and engineering best practices.
Work closely with software, hardware, systems, operations, and mission engineering teams.
Participate in design reviews, technical exchanges, and system trade-off discussions.
Support alignment with external partners, suppliers, and customers.
Contribute to integration campaigns, launch preparation, and mission operations support.
Degree in Electrical Engineering, Aerospace Engineering, Systems Engineering, or equivalent.
+7 years experience in avionics systems, electronics, embedded systems, or spacecraft engineering.
Strong understanding of:
Electronic and embedded system architectures
Communication and data handling principles
System integration and interface management
Experience with requirements engineering and system lifecycle development.
Knowledge of verification and validation methods, including testing and simulation.
Strong analytical and problem-solving skills.
Ability to work in multidisciplinary engineering environments.
Experience in spacecraft avionics or aerospace systems.
Familiarity with space communication and data standards (e.g., CCSDS).
Experience with HIL testing, simulation environments, or digital engineering tools.
Exposure to safety-critical or mission-critical system development.
Experience working in international or multi-stakeholder engineering teams.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
The Exploration Company is seeking a highly skilled Spacecraft Flight Computing Engineer with expertise in real-time, fault-tolerant computer systems running a RTOS and/or Linux. This role is focused on hands-on hardware and software development, with an emphasis on building systems resilient to radiation effects in space environments. The engineer will also apply knowledge of IP networking, including Time-Sensitive Networking (TSN) and Precision Time Protocol (PTP), to enable deterministic, synchronized communication across spacecraft subsystems.
Key Responsibilities
Design, implement, and maintain real-time embedded computing systems for spacecraft avionics.
Apply fault-tolerant computing techniques to ensure reliable operation in the presence of radiation-induced upsets and anomalies.
Develop and optimize our RTOS and Linux-based real-time operating environments, including kernel configuration, bootloader, device drivers, and system-level performance tuning.
Perform hardware design tasks, including schematic capture, PCB layout, and component selection using Altium Designer, with emphasis on radiation-tolerant design practices.
Develop, synthesize, and validate FPGA designs (VHDL/Verilog), incorporating mitigation strategies such as TMR, ECC, and scrubbing.
Design, configure, and troubleshoot IP networking protocols, with focus on TSN for deterministic networking and PTP for precise time synchronization across spacecraft systems.
Conduct system integration, hardware/software debugging, and fault injection testing to verify robustness under radiation and fault conditions.
Collaborate closely with flight software, avionics, and systems engineering teams to define computing, networking, and interface requirements.
Support mission operations through anomaly resolution and post-flight analysis of radiation-induced effects such as SEUs and TID.
Required Qualifications
Bachelor’s or Master’s degree in Computer Engineering, Electrical Engineering, Computer Science, or a related field.
Strong proficiency in C/C++ and Python for embedded software development and automation.
Hands-on experience with real-time systems and Linux-based embedded computing.
Practical expertise in fault-tolerant computing methods (redundancy, checkpoint/restart, graceful degradation).
Knowledge of IP networking protocols (TCP/IP, UDP, routing, switching) with direct experience implementing TSN and PTP in real-time or mission-critical environments.
Understanding of radiation effects on electronics and software, with experience implementing mitigation strategies at multiple system levels.
Experience with system-level debugging tools and hardware/software integration.
What we would love to see from you
Strong skills in writing, debugging and performance tuning low-level software for Linux and/or a RTOS, including the bootloader and device drivers.
Strong skills in hardware design using Altium Designer and/or Cadence Allegro for schematics and PCB layout. Bonus points if you have experience with multi-gigabit SERDES interfaces like SGMII, PCI Express and Serial RapidIO.
Solid background in FPGA development (VHDL/Verilog, synthesis, simulation, timing closure, hardware validation).
Familiarity with modern multi-core ARM-based System-on-Chip hardware, including the internal architecture.
Experience writing bare-metal code.
Strong skills in writing low-level software for Linux and/or a RTOS, including the bootloader and device drivers.
Exposure to radiation testing (heavy-ion, proton, or TID) and analysis.
Background in hardware-software co-design for reliability and fault-tolerance.
Prior hands-on experience supporting space missions.
What's special about TEC's Flight Computing team?
Our team is led by some the very best minds in the aerospace industry. We are experts in fault-tolerant spacecraft avionics and we’ve played significant roles within NASA/JPL’s avionics and robotics communities, SpaceX, Virgin Orbit and Google.
We’ve designed hardware and software for use on Earth, the International Space Station, in orbit around Earth's moon, Mars, Saturn and Jupiter. As a hardcore engineering team, we don’t believe in half measures and we’re looking for more engineers just like us. If this sounds like where you belong, I’d like to hear from you.
Direct involvement in building mission-critical spacecraft systems that operate in extreme environments.
A collaborative engineering culture where hands-on innovation, resilience, and reliability drive success.
Competitive compensation, comprehensive benefits, and opportunities for technical growth.
Due to federal regulations (e.g., ITAR/EAR), applicants must be U.S. citizens or lawful permanent residents (green card holders).
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are seeking a High-Thrust Engine Lead to help us in our mission by leading the activities of Storm development and managing the team.
• Leading a team of engineers and technicians, managing and directing a team of engineers and technicians who work on a variety of engineering projects. This may involve setting goals and objectives, assigning tasks, and providing guidance and support to team members.
• Leading the hiring process, defining the needs, the job description, conducting the interviews and onboarding newcomers.
• Supporting and challenging the team in their main design choices and development logic
• Overseeing the planning and execution of engineering projects, ensuring that engineering projects are completed on time and within budget. This may involve coordinating with other departments, such as sales, marketing, and manufacturing, to align projects with business objectives and needs.
• Supporting the business team to find new opportunities.
• Advanced degree (Master of Science or PhD) in propulsion engineering, system engineering, aerospace engineering, or another related field.
• Over 10 years of experience in systems engineering or spacecraft development roles.
• Strong understanding of cryogenic rocket engines and cryogenic propulsive systems.
• Demonstrated experience in managing requirements, interfaces, and technical budgets.
• Strong leadership and management skills, capable of leading a geographically distributed team and ensuring the timely delivery of high-quality products.
• Excellent collaboration skills for working effectively across departments to achieve seamless system integration.
• Fluency in English, with strong oral and written communication skills.
• Strong analysis and problem-solving skills.
• Strong organization and task prioritization skills.
• Positive and flexible attitude.
• Ability to communicate at all levels of the business.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are seeking a highly motivated Senior Flight Software Engineer to join our mission-driven team developing Nyx. In this role, you will take full ownership of key components of the flight software stack. You will be designing, implementing, and testing mission-critical systems that enable safe, autonomous, and reliable spaceflight operations.
You will work in a fast-paced, collaborative environment where cross-functional integration is essential. Your code will interface directly with vehicle avionics, guidance systems, propulsion, communications, and ground control. Expect to write modern, high-reliability C++ and Python code, drive software simulations, and ensure flight readiness through rigorous testing at both unit and system levels.
*Applications at all seniority levels are considered.
Design, implement, and own core flight software modules for spacecraft control, telemetry, data handling, fault management, and communications.
Develop in modern C++ and Python for support tooling, following best practices in software architecture, testing, and performance optimization.
Build and maintain test frameworks for automated unit, integration, and hardware-in-the-loop (HIL) testing to validate software behavior across mission phases.
Create and run high-fidelity simulations to model flight dynamics, subsystem interactions, and edge cases.
Collaborate closely with GNC, avionics, propulsion, and mission operations teams to ensure seamless integration and mission success.
Participate in code reviews, design reviews, and flight readiness assessments.
Strong proficiency in modern C++ (C++17 or newer) and Python.
Experience with real-time systems, embedded development, or spacecraft software.
Demonstrated ability to take ownership of complex technical problems and drive them to resolution.
Familiarity with software testing methodologies and simulation tools.
Excellent cross-disciplinary communication and collaboration skills.
Good understanding of math & physics.
Focus on detail, quality, and testing.
Experience with CI/CD systems and build systems.
Knowledge of safety critical and real-time critical software and familiarity with RTOS.
Good understanding of communication protocols such as: TCP/IP, UART, CAN Bus and serialization.
Experience with automotive or flight software frameworks.
Background in orbital mechanics, spacecraft systems, or space mission lifecycle.
Experience with industry standards such as AUTOSAR, ECSS, DO-178.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
The heart of a spacecraft lies in its engine, and that's why we, at The Exploration Company, are dedicated to developing our own cutting-edge Propulsion Systems ensuring the highest level of efficiency and reliability in our space endeavors.
We are seeking a talented Valves Development Engineer to join our Future Project division. As a key member of our engineering team, you will be responsible for designing, analyzing, and optimizing valve components for rocket engines.
Design and development of cryogenic valves (shut-off, control, check valves, etc.)
Performing engineering calculations (thermo-mechanical, stress-strain, sealing analysis)
Creating 3D models, technical drawings using CAD/CAE tools
Material analysis and selection suitable for cryogenic/hot temperatures
Collaborating with subcontractors, suppliers, production and testing teams
Leading of test campaigns, providing result analysis and design improvement
Preparation of technical documentation, specifications and manuals
Master's degree or higher in Mechanical Engineering, Aerospace Engineering, or a related and applicable technical discipline. Alternatively, a bachelor's degree with substantial relevant experience
Hands-on experience developing hardware from concept to working prototypes
Strong fundamentals in fluid mechanics, thermodynamics and mechanical design
Good understanding of industry standard and emerging manufacturing methods and their respective constraints
Proficient in the use of 3D CAD software and drafting
Experience writing software/scripts in languages like Python
Ability to infer system-level implications of component design choices
Proficient in conducting thermomechanical analysis is a strong asset
Relevant experience(s) with cryogenic fluids
Strong ability to work in close collaboration with others
Strong oral and written communication skills
Strong analysis and problem-solving skills
Strong research skills and ability to infer useful information from partial or even contradictory sources
Drive towards excellence coupled with ability to work within time constraints
Proficiency in organization and prioritization of tasks
Fluency in English
(Optional) Strong understanding of liquid-propellant rocket engines as a system
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are seeking a High-Thrust Engine Chief Engineer to lead the technical vision, architecture, and strategic direction of the Storm program, our next-gen high-thrust cryogenic rocket engine using LOX/LCH4. You will be the technical authority for the high-thrust engine development program.
This role is responsible for ensuring technical coherence across all domains and aligning engineering execution with company goals and mission objectives.
The Storm Chief Engineer serves as the senior technical authority for the program, guiding engineering leadership, setting design and performance standards, and ensuring system-level integrity and mission success. You'll own the technical integrity, performance, and safety of the engine throughout its lifecycle, from architecture definition to prototype testing.
The Storm Chief Engineer will work closely with the Storm Lead and the Head of Propulsion (reports to), ensuring that engineering excellence and delivery efficiency remain balanced.
Technical Leadership and Vision
Define and communicate the technical vision and roadmap for the Storm propulsion system in collaboration with the High Thrust Engine Lead, ensuring alignment with company strategy, mission objectives, and long-term scalability.
System Architecture Ownership
Serve as the primary owner of the Storm system architecture, ensuring optimal integration across propulsion, structures, avionics, and operations. Lead technical reviews. Arbitrate complex system trade-off
Mentorship and Technical Oversight
Provide guidance and mentorship to the team, fostering a culture of technical rigor, innovation, and accountability.
Risk Management & Safety
Identify, assess, and manage technical risks at the system level with the support of the team and their principals. Lead critical design and readiness reviews, ensuring robust decision-making and risk mitigation strategies. Approve all non-conformance waivers or design deviations.
Collaboration
Support business development, partner engagement, and customer interactions by representing the technical capabilities and vision of the Storm program. Coordinate with the Storm Lead on technical milestones, test readiness, and risk assessments. Work closely with program management and other engineering domains to balance performance, cost, and schedule, while maintaining technical integrity.
Continuous Improvement
Drive continuous improvement in engineering tools, methodologies, and team capability to ensure Storm remains at the forefront of propulsion technology. Drive maturation of critical technologies. Ensure lessons learnt are captured.
A minimum of a master’s degree in propulsion engineering, systems engineering, aerospace engineering, or a related field.
Over 15 years of experience in liquid rocket engine development, including at least one full-scale or prototype program, with experience in production/industrialisation
Deep understanding of cryogenic propulsion systems, including design, integration, and test.
Proven track record of defining and delivering complex aerospace systems from concept through flight.
Experience collaborating with European space agencies.
Proven ability to lead multi-disciplinary technical teams and arbitrate complex design trades.
Demonstrated experience managing system-level requirements, interfaces, and verification activities.
Experience in engine hot-fire testing and anomaly resolution.
Exceptional leadership and communication skills, with the ability to influence across engineering, program, and executive teams.
Strong analytical and problem-solving skills, with the ability to make sound technical decisions under uncertainty, schedule and cost pressure.
Proven ability to work with geographically distributed teams and coordinating with external partners or suppliers.
Positive, adaptable, and collaborative mindset, capable of inspiring excellence across the organization.
Fluency in English.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
The Lead Flight Software owns the end-to-end delivery of all flight software, simulation environments, and supporting tools and software test setups required to fly, verify, and certify the vehicle.
This is a hands-on leadership role. You will manage four teams (~20 engineers total) while staying technically sharp and deeply involved in architecture, trade-offs, and critical design decisions. You are accountable for delivering reliable, certifiable software in a fast-moving, resource-constrained startup environment.
You will define and evolve the overall flight software architecture, ensuring that it is robust, scalable, and aligned with mission and safety requirements. You will personally drive key architectural and system-level decisions, review critical designs and code, and ensure that technical trade-offs are made deliberately and transparently.
You will establish a strong interface between flight software, avionics, GNC, systems engineering, and safety teams, making sure that integration risks are identified early and resolved systematically. You will shape the verification and validation ecosystem, including SIL, HIL, and Monte Carlo campaigns, and automated test pipelines. It will be your responsibility to ensure that simulation and testing are not afterthoughts but central pillars of the program.
You will align software development plans with overall program milestones and vehicle integration timelines. You will represent flight software in major program reviews and external technical exchanges, including certification discussions with NASA and other stakeholders, and you will ensure a professional and well-prepared interface with IV&V organizations.
At the same time, you will build and lead a high-performing organization. You will coach team leads, grow senior engineers, establish engineering standards, and create a culture of ownership and accountability. You will set expectations clearly, make hard calls when needed, and ensure that the team delivers, all while prioritizing working software over paperwork without losing track of certification goals.
In your capacity as a Lead Flight Software, your role will be continuously evolving, but day to day your duties will include:
Lead the design, development, and testing of the flight software for the spacecraft and all related elements
Manage and oversee the software development team to ensure timely delivery of high-quality software
Collaborate with other teams and departments, such as avionics, GNC, and systems, to ensure seamless integration of the software with other systems
Develop and implement software development processes and best practices to ensure efficient and effective development
Ensure the software meets all safety, performance, and reliability requirements
Continuously evaluate and improve the software to meet changing mission needs and incorporate new technologies
Stay up-to-date with the latest advancements in software development for spacecraft and related systems.
Get your hands-dirty by contributing to the flight software code and tests
Promote and develop the skills and capabilities of your team members and support their development
In the role of Lead Flight Software ideally, you will have the following:
Extensive experience in designing, developing, and testing flight software for spacecrafts or related systems
Strong leadership and management skills to lead a software development team and ensure timely delivery of high-quality software
Excellent collaboration skills to work effectively with other teams and departments, such as avionics and systems, to ensure seamless integration of the software with other systems
Knowledge and experience in implementing software development processes and best practices to ensure efficient and effective development
Ability to ensure the software meets all safety, performance, and reliability requirements and continuously evaluate and improve the software to meet changing mission needs and incorporate new technologies
Up-to-date knowledge of the latest advancements in software development for spacecraft and related systems
Hands-on coding and testing skills to contribute to the flight software code and tests with C/C++
Ability to promote and develop the skills and capabilities of team members and support their development.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
The heart of a spacecraft lies in its engine, and that's why we, at The Exploration Company, are dedicated to developing our own cutting-edge Propulsion Systems ensuring the highest level of efficiency and reliability in our space endeavours.
We are seeking a talented Combustion Devices Development Engineer to join our Future Project division in the development of the Storm Engine. As a key member of our engineering team, you will be responsible for designing, analyzing, and optimizing combustion devices for cryogenic rocket engines.
Carry-out the functional and hydraulic design of combustion devices
Review subsystems requirements and carrying out trades to define combustion devices architecture
Supervision of external subcontractors
Organize and support combustion devices component test campaigns (configuration definition, test preparation, execution and results analyses)
Develop and update fluidic models based on literature review and/or experimental data
Iterate subsystem designs using simulated and/or real-world test data
Masters/bachelors with honours or higher in Aerospace Engineering, or a related and applicable technical discipline
Hands-on experience developing hardware from concept to working hardware
Strong technical fundamentals in design, fluid mechanics, thermodynamics, and heat transfer
Proficient with CAD (Siemens NX is an asset), and/or other CAE design
Experience with analysis software (FLUENT or OpenFOAM preferred)
A methodical approach to problem-solving and design trades
Experience writing software/scripts in languages such as Python
Familiar with cryogenic fluids is a strong asset
Strong oral and written communication skills
Strong analysis and problem-solving skills
Strong organizing and prioritization of tasks
Excited for the future of space exploration and a strong interest in propulsion systems
Demonstrates behaviours consistent with The Exploration Company’s core values of Mission, Vision, Integrity, Excellence and Teamwork
Space enthusiast: ready to have an impact on the future global space industry
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
The heart of a spacecraft lies in its engine, and that's why we, at The Exploration Company, are dedicated to developing our own cutting-edge Propulsion Systems ensuring the highest level of efficiency and reliability in our space endeavors.
We are seeking a talented Turbopump Rotordynamics Engineer to join our Future Project division. As a key member of our engineering team, you will be responsible for designing, analyzing, and optimizing turbopump components for high-thrust rocket engines.
Making and documenting well-reasoned consequential decisions in turbomachinery design
Engage proactively with development engineers to assist in the conception, refinement, and validation of designs
Carrying out and reviewing different turbopump architectural trades
Performing various rotor dynamics analysis to inform subsequent cryogenic pump components' specifications
Performing cryogenic pump components design and procurement based on specifications and best practices
Supervision of external subcontractors and communication with suppliers
Analytical modeling of geometric and mechanical problems and implementing solutions in programs
Master's Degree or higher (or NZ and AUS \"Bachelor with honors\") in Mechanical Engineering, Aerospace Engineering, or a related and applicable technical discipline. Alternatively, a bachelor's degree with substantial relevant experience
3-5 years of proven experience working with any kind of fast rotating machinery
Strong fundamentals in thermodynamics and mechanical design
Strong fundamentals of the problems of machine dynamics, in particular rotordynamics
Strong knowledge about bearings and rolling elements
Good knowledge of materials
Good understanding of industry standard and emerging manufacturing methods and their respective constraints
Proficient in the use of 3D CAD software and drafting
Experience writing software/scripts in languages like Python
(Optional) Hands-on experience developing hardware from concept to working prototypes.
Strong ability to work in close collaboration with others
Strong oral and written communication skills
Strong analysis and problem-solving skills
Strong research skills and ability to infer useful information from partial or even contradictory sources
Drive towards excellence coupled with ability to work within time constraints
Proficiency in organization and prioritization of tasks
Behavior consistent with The Exploration Company’s core values of Mission, Vision, Integrity, Excellence and Teamwork
Enthusiasm for space exploration: be ready to have an impact on the future global space industry.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
To support our growth, we are looking for a Senior Teamcenter Administrator to take ownership of our Siemens Teamcenter landscape.
As a Senior Teamcenter Administrator, you will be responsible for the configuration, operation, and evolution of our multi-site on-prem Siemens Teamcenter environment, with a strong focus on Linux-based cloud deployments.
You will work closely with engineering, IT, and external partners to ensure a stable, scalable, and well-documented PLM platform that supports advanced aerospace development workflows.
Own the configuration, administration, and lifecycle management of Siemens Teamcenter
Manage multi-site TC on cloud & Linux based infrastructure
Design and maintain PLM data models, workflows, access rules, and business rules and models aligned with engineering and compliance needs.
Support installation, upgrades, and deployments of Teamcenter environments (DEV / TEST / PROD).
Collaborate on integrations with CAD (e.g. NX), simulation tools, and enterprise systems.
Act as the technical reference for Teamcenter across the organization.
Create and maintain documentation, policies and workflows related to PLM and Teamcenter
Strong hands-on experience with Siemens Teamcenter, including Active Workspace.
Proven experience managing Teamcenter on Linux (mandatory).
BMIDE development and customization.
Ability to work independently and take technical ownership.
Experience in aerospace, automotive, or complex engineering environments.
Knowledge of Teamcenter integrations (SOA, CAD, OpCenter, simulation and other enterprise systems).
Familiarity with scripting, automation, or PLM-related DevOps practices.
Experience supporting regulated environments (e.g. export control, traceability).
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
Join us as a Software Engineer – Mission Control Software, where you will develop mission-critical software that powers our integrated testing and mission operations. You will primarily work on our Mission Control Software and build supporting tools used by flight controllers and engineering teams.
In your capacity as a Software Engineer - Ground Segment you will:
Develop robust software used in testing and mission operations
Contribute across the full software development lifecycle, from design to deployment
Build scalable systems that support TEC’s expanding mission activities
Collaborate with testing, engineering, and operations teams to understand and meet operational needs
Write performant, maintainable, and well-documented code
Ensure reliability through automated testing and operational validation
Support users and contribute to improving development workflows and tooling
Mentor junior engineers and contribute to a strong engineering culture
The ideal candidate will have:
Experience with backend development using Python and/or Ruby (on Rails)
Frontend experience with modern JavaScript frameworks (React, Vue.js, or similar)
Familiarity with object-oriented programming concepts and design principles
Experience with message brokers or event streaming systems (e.g., Redis Streams, Kafka)
Experience building systems for real-time data processing and ingestion
Familiarity with object storage solutions (e.g., MinIO, AWS S3) for handling large datasets
Experience with version control systems such as Git
Familiarity with automated testing frameworks
Ability to design, build, and maintain scalable distributed systems
Solid understanding of software design patterns and engineering best practices
Experience working in agile software development environments
Strong analytical thinking and problem-solving skills
Attention to detail with the ability to balance quality and delivery speed
Motivation to thrive in a fast-paced, mission-driven environment
Experience with relational or time-series database technologies
Experience with cloud platforms such as AWS or Azure
Familiarity with containerization and CI/CD pipelines
Experience in the space industry or other safety-critical domains
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are looking for a Composite Manufacturing Technician to join our team responsible for producing thermal protection systems designed for demanding environments. This hands-on role based near Bordeaux in France will contribute directly to the quality and performance of the products we deliver.
Key Responsibilities:
Thermal Protection Systems Manufacturing:
Prepare materials and tooling according to technical instructions.
Perform molding operations (including Resin Transfer Molding - RTM, infusion) and curing in an autoclave or oven.
Monitor manufacturing parameters to ensure quality and repeatability of parts.
Post-processing and Finishing:
Perform post-processing operations on manufactured panels: trimming, sanding, fitting.
Operate CNC machines for machining operations required for post-processing of manufactured composite parts.
Contribute to inspections to verify compliance.
Quality and Compliance Monitoring:
Apply production quality standards and ensure traceability of all operations performed.
Participate in the identification and resolution of non-conformities.
Operational Maintenance of Production Equipment:
Carry out first-level maintenance on production equipment (CNC machines, tooling, ovens, etc.).
Monitor the condition of tools and report any malfunction to ensure availability of industrial resources.
Continuous Improvement:
Propose optimization actions for processes, tools, and working methods.
Contribute to the technical skill development of the workshop.
Education and Experience:
Education: Technical degree equivalent to an Associate’s Degree (e.g., in composites, materials, manufacturing, plastics engineering, aeronautics, or an equivalent industrial field).
Professional experience: Minimum of 5 years’ experience in composite manufacturing, ideally in the aerospace, space, defense, marine, or high-performance automotive sectors.
Expected Technical Skills:
Proficiency in molding, infusion, and curing processes.
Experience with CNC machine tools for post-machining of composites.
Knowledge of first-level maintenance of industrial equipment.
Personal Qualities:
Rigor, precision, and respect for quality requirements.
Autonomy, team spirit, and sense of responsibility.
Location:
Position based near Bordeaux in France within an innovative and fast-growing industrial environment.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
The operations team is looking for a Site Director (Germany) to own safe, compliant, and efficient operations across our sites in Munich (includes integration halls, offices, labs, and test areas). Reporting to Lead Operations, you will lead vendors or work hands-on to deliver facilities reliability, compliant execution, and friction‑free activities.
Lead day‑to‑day test site operations: reception, goods‑in/out, utilities, janitorial, waste, test site activities (together with the site manager and logistics responsible)
Plan and execute preventive and corrective maintenance; manage work orders, spares, and service contracts to keep critical utilities running.
Run office/lab/test‑area fit‑outs and moves: contractor pre‑qualification, risk assessments, permit‑to‑work (PTW), and safe commissioning in occupied areas.
Manage leases and landlord relationships; track obligations, service charges, and issues to resolution.
Coordinate inbound/outbound logistics, including dangerous goods with certified partners; ensure yard/dock safety and traffic plans.
Implement the company EHS Management System on site (defined by the EHS Engineer): chemical and waste controls, PPE, and legal registers; drive incident reporting, root‑cause analysis, and corrective actions.
Own emergency preparedness: evacuation plans, drills, first‑aiders/fire wardens, and liaison with local authorities as needed.
Operate physical security: access control/badging, visitor management, CCTV, key control, and guard services.
Implement export‑control physical safeguards (aligned with our Internal Compliance Program): controlled rooms/cabinets, visitor escorting, signage, and disposal procedures.
Build and manage the site OPEX/CAPEX budget; run project stage‑gates, vendor SOWs, and change orders; deliver projects on time and on budget with as‑builts and O&M docs.
Provide accurate records and reporting for audits, Quality Management System expectations, and ESG/B‑Corp data (energy, water, waste, recycling).
Lead and coach the test site team and vendors; communicate proactively about works, outages, and changes.
5+ years leading multi‑disciplinary site or test‑site operations in Germany (industrial, aerospace, or high‑hazard environments).
Proven experience planning and executing propulsion/engine or high‑energy tests (stand allocation, crew rostering, TRR/DR cadence, anomaly management).
Strong knowledge of German EHS and DREAL environmental regulations (particularly with ICPE sites) and practical experience with contractor controls in hazardous operations.
Comfortable hands‑on during test campaigns; disciplined communication and decision‑making under time pressure.
Familiarity with cryogenic and high‑pressure fluid systems, instrumentation/DAQ, and interlock/safing concepts (you will not design these, but must govern readiness and safe operation).
Demonstrated success delivering fit‑outs/commissioning, running maintenance programs, and closing audit actions.
Budget ownership (OPEX/CAPEX), vendor negotiation, and basic project governance.
Familiarity with QMS expectations (ISO 9001/9100), CMMS tools, and MS 365/SharePoint; basic ability to read/redline site drawings.
Languages: German (native‑level) and English (professional working proficiency).
Leadership: organized, service‑oriented, decisive; able to set expectations and coach teams and suppliers; willing to support off‑hours/weekend test ops when needed.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
The Operations team is hiring a hands‑on technician to keep our Munich sites running safely and smoothly. You’ll perform day‑to‑day maintenance, carry out basic repairs, and coordinate certified vendors for the jobs that legally require them. This is a practical, tools‑on role with clear ownership of the site’s essentials.
Carry out preventive and corrective maintenance on HVAC (filters/belts/AHUs), plumbing & sanitary hot water, compressed‑air distribution (drains/leaks), lighting and LV electrical basics, doors/gates/roller shutters, and small building works (paint/shelving/furniture).
Do weekly visual/functional checks on UPS/central battery/inverters and emergency lighting; raise service tickets when needed.
Coordinate statutory inspections with accredited providers (electrical checks, lifts, automatic doors, emergency lighting, sprinklers/fire doors & pumps, smoke extraction) and file the reports.
Run water hygiene routines (temperature checks, flushing); book Legionella sampling with the lab and close actions.
Support fire safety basics (extinguishers, signage, evacuation routes) and issue/close hot‑work permits for contractors.
Look after security systems with the vendor (badges, CCTV, intrusion, alarm teletransmission) and opening/closing routines.
Own cleaning, waste & compactor pickups, paper recycling/confidential destruction, and pest/drain services with vendors.
Inspect and maintain roof/terrace & gutters (vendor for waterproofing repairs).
Oversee landscaping/indoor plants service.
If Facilities owns them: coordinate forklifts/MEWPs periodic checks and user daily‑check routines (otherwise interface with Logistics).
Use the CMMS/ticketing tool to receive/close work orders, track assets & consumables (filters, softener salt), and report simple monthly KPIs.
Act as first response for facilities incidents; make safe and call vendors/EHS as needed.
3+ years as a building/facility maintenance technician in industrial, R&D or lab sites.
Solid hands‑on skills across HVAC basics, plumbing, and low‑voltage electrical troubleshooting; knows when to fix vs. call a vendor.
Comfortable with CMMS and clear, tidy documentation.
Can read manuals and simple drawings; uses safe working practices (lockout/tagout basics).
German fluent; English workable with vendors and internal teams.
Nice to have / or obtained after start: Electrical habilitation (B0/H0 or BS/BE‑manœuvre), SST first‑aid, CACES/authorisations for forklifts/MEWPs; F‑Gas awareness when dealing with HVAC contractors.
Valid driver’s license.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
As a talented Environment Health and Safety (EHS) Engineer, you will support the environment, health and safety compliance for different functions and projects across the company.
Key Responsibilities / Tasks:
Compliance of Health Safety Environment
Ensure the organization complies with all relevant environmental, health, and safety regulations and standards set by local, national, and EU agencies. (Mandatory trainings, required documentation towards German governmental agencies)
Support the implementation, and maintain comprehensive safety programs and policies aimed at minimizing workplace hazards and ensuring a safe working environment.
Conduct regular inspections and audits of facilities, equipment, and processes to ensure ongoing compliance with EHS standards and identify opportunities for improvement.
Propose improvements to the system and monitor KPI to ensure a zero accident policy.
Assist on proper handling, storage, and disposal of hazardous materials and waste, minimizing environmental impact.
EHS Management
Actively promotes workplace health, safety, and environmental concerns across all tiers of the organization, from executive leadership to operational staff, by ensuring access to relevant training programs and the rollout of EHS awareness campaigns and introductory initiatives.
Performs and support risk analysis, helping employees reduce risk exposure, by implementing adequate measures concordantly to applicable regulations
Develop and coordinate robust emergency response plans and procedures to handle potential emergencies such as fires, chemical spills, or natural disasters effectively.
Investigate accidents, incidents, and near-misses to determine root causes and implement corrective actions to prevent recurrence.
Project Safety:
Provide expert advice on health and safety matters related to products and projects contributing to risk management process and hazard analysis at project level (FMEA, HAZID, HAZOP)
Support teams all along project life (from cradle to life) to ensure adherence to applicable requirements and propose actions to contain risk exposure.
What we would love to see from you
In the role of Environment Health and Safety (EHS) Engineer ideally, you will have the following:
Degree and/or certification in environmental health and safety management
First experience in an EHS role, preferably within one of the following industries: aerospace, oil & gas, automotive or similar
Knowledge of German EHS regulations
Experience with risk assessment methodologies, safety audits, and incident investigation,
Exceptional analytical and problem-solving skills,
Excellent communication skills in both German and English,
Be a unifying force and encourage everyone to follow
Detail and solution-oriented mindset with a strong ability to work independently,
Support and deploy culture change to create a culture of safety
Knowledge of the standards ISO 14001 and ISO 45001
Additional assets:
Knowledge and experience with hazards linked to:
Chemicals
Pressurised gases
Cryogenics fluids
Electrical installations
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We want you as a creative, innovative, CAD designer to help us in our mission by modelling the physical architecture of our current and future vehicles.
You will be successful in this role if you are able to help us:
● To contribute to the definition of our overall vehicle architecture
● To contribute to the detailed definition of our vehicle
Your main tasks are the following :
To build the CAD physical model of the vehicles and their sub-systems on NX (or equivalent) and contribute to the choices in terms of overall architecture, aeroshape, equipment accommodation and main materials
To maturate the CAD models by adjusting the architecture, accommodation, structure materials and thicknesses based on the outcomes of the thermo-mechanical computation loops and system trade-offs
To collaborate closely with thermal and structural analysts, materials and manufacturing engineers to ensure compliance of the physical architecture with the mission environments and manufacturing constraints
To ensure the configuration management of the CAD models
To manage the vehicle structure mass budget aided by the CAD model, and tracked in the overall system database
To contribute to co-engineering sessions with the mission analysis, propulsion, avionics, GNC and system engineers, by sharing guidelines or orders of magnitude in order to converge on the feasibility of a solution, based on engineering feeling or simplified analytical approach
To define the volume allocations and clearances specifications towards the vehicle sub systems
To contribute to the improvement of CAD tools and processes
To effectively communicate and provide recommendations through the analysis, preparation, and presentation of technical data
To provide technical documentation & drawings and participate to reviews of designed systems
To assist the Additive Manufacturing engineers for dedicated studies
Qualifications
An advanced degree in mechanical, aerospace or manufacturing engineering would be appreciated
Minimum of 5 years of experience as CAD designer
Experience with CAD softwares (NX, CATIA...)
Strong knowledge on aerospace vehicle design and associated challenges
Experience in Additive Manufacturing
Fluent in English. German and French is an asset
Skills and Behaviours
Strong oral and written communication skills
Strong analysis and problem-solving skills
Strong organising and prioritisation of tasks
Positive and flexible attitude to get the job done
Demonstrates behaviours consistent with The Exploration Company’s core values of Vision, Mission, Teamwork, Integrity and Excellence.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
Our Advanced Projects unit is dedicated to expanding and complementing these capabilities by conceptualizing and pre-developing new technologies, products and programs.
We want you as a talented ground operations & industrialization engineer to help us in our mission by conceptualizing ground segment infrastructures, operations, production processes, facilities and logistics in early project phases. You will work closely with the flight system developers, program managers, system engineers and MAIT department.
As a ground operations & industrialization engineer, your role will be continuously evolving, but day-to-day your duties will include:
Develop ground segment architectures for end-to-end product concepts, such as in-orbit services, launch services or exploration missions.
Describe high-level concepts of operations for integrated vehicles, infrastructures and subsystems
Describe high-level manufacturing, assembly, integration and testing processes for integrated vehicles and subsystems
Describe high-level construction and maintenance plans for infrastructures
Describe high-level logistics concepts for end-to-end programs
Perform technical trade-offs with respect to manufacturability and operability of flight systems
Specify programmatic and technical requirements and budgets for ground segment concepts
Provide cost estimates for ground segment facilities and operations
Provide industrialization plans, including make-or-buy strategy and industrial consortium suggestions
Collaborate with multidisciplinary project teams developing end-to-end product concepts
Support the commercial and program teams in writing and negotiating proposals for future projects
Own advanced project contract work packages, including activity planning, supplier and subcontractor management and reporting to project management and/or the space agency
Advanced degree (MSc) in aerospace engineering, industrial engineering, or another related field
5+ years proven working experience in spacecraft operations, production or testing
Experience with launch operations or cryogenic process plants is a plus
Strong system engineering and project management skills
Hands-on design and analysis skills for mechanical, fluidic and control systems
Familiarity with relevant European regulations, such as the FSOA, REACH, Machine Directive, EN 9100
Fluent in English. German, French, and Italian are assets
Strong oral and written communication skills
Strong analysis and problem-solving skills
Strong organizing and prioritization of tasks
Working with high independency, but high alignment within a team
Positive and flexible attitude to get the job done
Demonstrates behaviors consistent with The Exploration Company’s core values of Vision, Competence, Integrity, and Passion
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We want you as a talented Supply Chain Manufacturing Engineer (Metals) to help us in our mission by supporting the design team to build up the Nyx vehicle. As process engineer you will:
Work together with the mechanical and design units to support through our supply chain the manufacturing of complex metallic structures,
You will work closely with the product assurance and procurement team to help controlling the quality of the final delivered products.
You will have a key responsibility at the technical crossroad between vehicle design team, product assurance team and procurement team. Your role will be continuously evolving, but day to day your duties will include:
Taking responsibility for technical exchanges with suppliers about manufacturing of metallic structural parts. Under the intended product owner guidance you act as a technical liaison between the company and its suppliers, facilitating clear and open communication to address any manufacturing related issue promptly.
Monitoring suppliers industrial process, and if necessary propose improvements, to make sure the final product meets the requirements.
Supervising supplier's development roadmaps from TRL 4-5 up to TRL 9, assuring the proper technology development.
Partnering with the Product Assurance team to monitor supplier quality control plans, required standards, specifically focusing on NDT (Non-Destructive Testing) and material certifications.
Collaborating continuously with engineering team and suppliers to accomplish the delivery of final products, from engineering models up to final flight models, in accordance with schedule.
Supporting suppliers to analyse and improve their industrial processes, considering challenges of large-scale machining, sheet metal bending, additive manufacturing, and specialized joining (e.g. welded structures).
Supporting the procurement and engineering team with technical discussions with suppliers.
Documentation for the various reviews (TRL review, PDR, CDR, QR, MRR)
Generating technical reports and presentations to communicate findings and recommendations to stakeholders.
Bachelor's or master's degree in Aerospace engineering, Material and Processes engineering, Mechanical engineering or any related area.
At least 7 years of experience as manufacturing engineer, focus on space-graded metallic components is mandatory.
Deep knowledge of high-performance alloys (Aluminium, Titanium, Inconel) and manufacturing methods such as 5-axis machining, sheet metal bending, coating, heat treatment, ALM (Additive Layer Manufacturing), and forging.
Significant experience in the manufacturing of welded metallic structures (e.g., TIG, Electron Beam or Friction Stir Welding) and the associated inspection standards.
Familiarity with spacecraft primary structures, pressure vessels, or re-entry vehicle hardware is a major asset.
Excellent problem-solving skills and attention to detail as well as organizational skills.
Effective communication and teamwork abilities.
Ability to collaborate with multidisciplinary teams (Design, AIT, Product Assurance, Procurement).
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
The heart of a spacecraft lies in its engine, and that's why we, at The Exploration Company, are dedicated to developing our own cutting-edge Propulsion Systems ensuring the highest level of efficiency and reliability in our space endeavors.
We are seeking a talented Turbopump Principal Engineer to join our Future Project division. As a key member of our engineering team, you will be responsible for leading the development of the turbomachinery of our high thrust engine.
Managing and mentoring a team of engineers with diverse expertise, background and seniority (set objectives, perform reviews, support team members in their development...)
Ensuring the proper development of complex systems which are the turbomachinery of a high thrust liquid rocket engine (management of planning and resources, organization of reviews...)
Lead technical decisions for the development of the turbopumps and its surrounding infrastructures (test stands, manufacturing capabilities...) always having in mind the potential impacts on the engine.
In collaboration with the Business Team, participate in the preparation of proposals writing
Oversee tests to validate the performance and reliability of turbopump components
Identify, evaluate, and collaborate with suppliers to ensure the quality, cost-effectiveness, and timely delivery of turbopump components
Anticipating risks for the turbopumps development and proposing corresponding mitigation actions
Master's Degree or higher (or NZ and AUS \"Bachelor with honors\") in Mechanical Engineering, Aerospace Engineering, or a related and applicable technical discipline with a minimum of 8 years of related experience
Proven experience leading projects from the early design phases of space projects, through development test campaigns until hardware qualification
Strong understanding of liquid-propellant rocket and engines as systems
Strong fundamentals in thermodynamics and mechanical design
Some understanding of problems of machine dynamics, such as rotordynamics
Good understanding of industry standard and emerging manufacturing methods and their respective constraints
Proven experience in external suppliers handling
Fluent in English. German is an asset
Strong ability to work in close collaboration with others
Strong oral and written communication skills
Strong analysis and problem-solving skills
Strong research skills and ability to infer useful information from partial or even contradictory sources
Drive towards excellence coupled with ability to work within time constraints
Proficiency in organization and prioritization of tasks
Behavior consistent with The Exploration Company’s core values of Mission, Vision, Integrity, Excellence and Teamwork
Enthusiasm for space exploration: be ready to have an impact on the future global space industry
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
Our teams design and operate advanced spacecraft, propulsion systems and associated ground infrastructure, working in close collaboration with European and international partners.
As part of our propulsion roadmap, we develop several engines (Storm) that will be key technologies to improve future European capabilities. To support their executions, we are reinforcing the program team with a dedicated Project Management Officer (PMO).
The Engine Program PMO supports the delivery of TEC engines by ensuring robust planning, schedule tracking, cost monitoring, risk management and reporting across the program. The PMO works alongside the Engine Program Managers, engineering teams and support functions to ensure the program is executed on time, on cost and in line with TEC governance and processes.
Support the Engine Program Managers in:
building and maintaining the integrated program plan
tracking milestones, reviews and key deliverables
Consolidate schedules, dependencies and interfaces across activities (development, procurement, testing, external partners)
Identify deviations from plan and support mitigation actions
Support cost tracking for the engine program:
budget follow‑up
cost‑to‑complete and EAC updates
Interface with Finance and Procurement to ensure consistency between technical progress, spending and forecasts
Support engine risk management in line with TEC processes:
maintain the program risk register
prepare and support risk reviews
track mitigation actions and escalations
Ensure risks and issues are visible, structured and followed up
Prepare and consolidate:
program status reports
management dashboards
inputs to internal and external reviews (e.g. SRR, PDR, CDR)
Support the organization and preparation of program reviews and decision gates
Apply TEC project management standards, tools and templates
Ensure consistency and traceability of engine program data
Contribute to continuous improvement of PMO practices within engine programs
Master’s degree (or equivalent) in engineering, project management, industrial management or a related field
First experience in project or program management in a complex technical environment (space, aerospace, energy, industrial systems, etc.)
Solid understanding of planning, cost tracking, risk management and reporting
Structured, rigorous and reliable
Comfortable working with multiple stakeholders and interfaces
Clear communicator, both written and verbal
Able to work in an international, fast‑moving environment
Fluent in English; French and/or German is a plus
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We want you as a talented Logistics technician to help us in our mission by supporting the management of our logistics operations and inventory!
The Logistics and Warehouse Technician is responsible for supporting daily warehouse operations, including receiving, storing, organizing, and dispatching goods. This role ensures accurate inventory management, efficient material handling, and timely delivery of products while maintaining safety and quality standards.
Receive, inspect, and record incoming shipments for accuracy and damage
Store goods in designated locations following warehouse procedures
Pick, pack, and prepare orders for shipment
Operate warehouse equipment such as forklifts and pallet jacks
Maintain accurate inventory records using warehouse management systems
Conduct regular stock checks and assist with inventory audits
Load and unload trucks safely and efficiently
Ensure proper labeling, packaging, and documentation of goods
Maintain a clean, organized, and safe warehouse environment
Support equipments maintenance records
Follow all health, safety, and company regulations
High school diploma or equivalent
Previous experience in logistics, warehousing, or a similar role preferred
Basic computer skills and familiarity with inventory systems
Ability to operate warehouse equipment (training or certification is a plus)
Good organizational and time management skills
Strong attention to detail and accuracy
Ability to work independently and as part of a team
Physical stamina and ability to lift heavy items
Problem-solving and multitasking skills
Good communication skills
Reliability and a strong work ethic
Forklift license or certification
Experience with warehouse management software (WMS)
Knowledge of logistics processes and supply chain operations
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
Position Overview
Reporting to the Head of Controlling, you will be a key transversal finance partner supporting both development and manufacturing activities within a high-technology industrial environment.
You will structure our analytical processes, safeguard the reliability of our financial data, and help operational teams steer performance.
Key Responsibilities
Industrial costing & labor cost management — Lead the time-booking system (rules, compliance, data quality) and define/maintain internal hourly rates, analysing actual vs. budget and over/under-absorption.
Analytical master data — Manage cost centers, cost objects and allocations, ensuring consistency across all financial systems.
Industrial financial processes — Design and maintain processes around manufacturing orders, align operational/analytical/accounting data, and support costing methodologies and production valuation.
Monthly closing — Own analytical closing (timesheet validation, cost-allocation controls, manufacturing-order closure) and analyse standard vs. actual cost variances.
SG&A budget ownership — Lead the central SG&A budgeting process, deliver variance analysis, and support department heads in managing their costs.
Planning & business partnering — Contribute to budgeting, forecasting and business-planning cycles, and provide profitability and investment analysis.
Continuous improvement — Drive finance transformation and ERP projects, and act as our best-practice reference for industrial controlling.
Candidate Profile
Master’s degree in Finance or Controlling
8–10+ years in industrial controlling
Mandatory experience in aerospace , aeronautics or another high-tech manufacturing industry
Audit experience would be a plus, but not mandatory
Strong experience in complex, multi-entity environments
Key Skills
Strong industrial costing expertise
Deep understanding of analytical accounting
Process structuring capability
ERP and data analytics proficiency
Strong analytical mindset and cross-functional leadership
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are looking for a Principal Mission Assurance Engineer to lead our Mission Assurance team and own the end-to-end strategy that ensures our spacecraft is safe, reliable, and mission ready. In this role you will be embedded with the design, test, and operations teams, driving the vehicle safety architecture as well as relentlessly driving risk down and availability up. In this role you will be the technical authority for mission assurance across the program and get to lead and mentor a team of ~6 mission assurance engineers.
End-to-end ownership of the vehicle safety architecture making sure it meets all safety & reliability requirements (both internal and external from ISS program, ESA and CNES on entry safety).
Owner of overall flight reliability, responsible for assessing pre-flight risks and potential mitigations with vehicle design, analysis, and operations teams.
Perform and review FMECA, FTA, PRA, and RAM analyses to identify risks and failure modes.
Define and validate the spacecraft fault management and FDIR architecture.
Work with avionics, software, and operations teams to implement fault management strategies and ensure safe behavior under off-nominal conditions.
Support on-console operations as the Mission Assurance representative and drive in-flight anomaly resolution. Ensure lessons learned feed directly back into design and FDIR improvements.
Lead and mentor a team of safety, reliability, and fault management engineers. Set priorities, review their work, and grow their technical depth.
Champion a culture of mission assurance. Instill first-principles thinking, disciplined verification, and data-driven decision-making.
Report to program leadership on RAMS status, residual risk, and flight readiness.
Drive corrective actions from anomalies, test failures, and operational events back into design improvements.
The ideal candidate will have:
Master’s degree in an engineering or science discipline.
8+ years of experience in RAMS, mission assurance, or systems safety on complex hardware systems.
Experience leading teams or projects — setting technical direction and delivering results.
Proficiency with reliability tools (e.g., FMECA, FTA, reliability block diagrams).
Deep understanding of fault tolerance, redundancy management, and failure detection/isolation/recovery.
Technical knowledge of spacecraft systems and operations (e.g., communications, orbital mechanics, avionics, propulsion, thermal control, life support systems).
Strong written and verbal communication of technical information.
Able to effectively manage projects and tasks while meeting aggressive deadlines.
Thrives under pressure and is resilient in the face of technical challenges.
Excellent organizational and interpersonal skills.
Experience developing and validating FDIR logic, watchdog strategies, and fault response sequences.
Previous experience in a customer-facing role working through design requirements, test acceptance, and verification (especially with a government customer such as ESA/NASA).
Ability and willingness to put in extra time to mentor other engineers while also being a significant individual contributor.
Passion for advancing the commercial space industry and human spaceflight.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are looking for a Mission Assurance Engineer to own the end-to-end strategy that ensures our spacecraft is safe, reliable, and mission ready. In this role you will be embedded with the design, test, and operations teams, driving the vehicle safety architecture as well as relentlessly driving risk down and availability up.
Ownership of the vehicle safety architecture making sure it meets all safety & reliability requirements (both internal and external from ISS program, ESA and CNES on entry safety).
Responsible for assessing pre-flight risks and potential mitigations with vehicle design, analysis, and operations teams.
Perform and review FMECA, FTA, PRA, and RAM analyses to identify risks and failure modes.
Define and validate the spacecraft fault management and FDIR architecture.
Work with avionics, software, and operations teams to implement fault management strategies and ensure safe behavior under off-nominal conditions.
Support on-console operations as the Mission Assurance representative and drive in-flight anomaly resolution. Ensure lessons learned feed directly back into design and FDIR improvements.
Champion a culture of mission assurance. Instill first-principles thinking, disciplined verification, and data-driven decision-making.
Report to program leadership on RAMS status, residual risk, and flight readiness.
Drive corrective actions from anomalies, test failures, and operational events back into design improvements.
The ideal candidate will have:
Master’s degree in an engineering or science discipline.
Proficiency with reliability tools (e.g., FMECA, FTA, reliability block diagrams).
Understanding of fault tolerance, redundancy management, and failure detection/isolation/recovery.
Technical knowledge of spacecraft systems and operations (e.g., communications, orbital mechanics, avionics, propulsion, thermal control, life support systems).
Strong written and verbal communication of technical information.
Able to effectively manage projects and tasks while meeting aggressive deadlines.
Thrives under pressure and is resilient in the face of technical challenges.
Excellent organizational and interpersonal skills.
Experience developing and validating FDIR logic, watchdog strategies, and fault response sequences.
Previous experience in a customer-facing role working through design requirements, test acceptance, and verification (especially with a government customer such as CNES/ESA/NASA).
Passion for advancing the commercial space industry and human spaceflight.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
At The Exploration Company, we are developing next-generation space transportation systems, including a lunar lander capable of precision landing and reusable operations. To support this effort, we are establishing a dedicated remote test site in the United Arab Emirates to perform hot-fire propulsion testing and hopper flight demonstrations.
As a Lunar Lander Test Bench Development Engineer, you will lead the design, development, and deployment of this new test facility from concept to operations. The role combines propulsion test infrastructure design, cryogenic fluid systems engineering, civil infrastructure coordination, and end-to-end project execution in a remote environment.
This position requires periodic travel to the UAE during site development, commissioning, and operations phases.
In this role, your responsibilities will evolve with project maturity. Day-to-day duties will include:
Test Site Development
Define and synthesize system-level requirements for a remote lunar lander test site supporting hot firing and hopper flight testing.
Lead the design and implementation of the complete facility, including ground infrastructure and utilities.
Specify and implement propellant and pressurization systems including Liquid Oxygen, Liquid Methane, Helium, and Nitrogen.
Design infrastructure enabling autonomous operation of a remote site (power generation, storage, logistics, safety systems).
Fluid and Cryogenic Systems Engineering
Develop P&IDs for propulsion test facilities and associated ground support equipment.
Design, size, and select components for cryogenic and high-pressure fluid systems.
Ensure safe handling, storage, and distribution of cryogenic propellants and pressurants.
Infrastructure and Civil Engineering Coordination
Define facility layout, foundations, structural interfaces, and site infrastructure requirements.
Coordinate with civil engineering partners to implement test stands, safety perimeters, and support buildings.
Safety, Automation, and Operations
Define and implement automation architectures for test operations and facility control, including safe connections with the vehicle to test.
Develop and validate safety-critical systems protecting personnel, hardware, and environment.
Perform hazard analyses (FMEA, HAZOP, risk assessments) and implement mitigation measures.
Develop test procedures, operational concepts, and commissioning plans.
Project Leadership
Lead end-to-end development of the test facility including design, procurement, manufacturing, installation, commissioning, and operations readiness.
Manage technical interfaces with internal teams, customers, and external suppliers.
Perform trade-off analyses to optimize performance, safety, cost, and schedule.
Support on-site deployment, integration, and test campaigns in the UAE.
Degree in aerospace engineering, mechanical engineering, energy systems, or a related field.
5+ years of experience in propulsion test facilities or hot-fire test bench development.
Strong expertise in fluid systems engineering, including cryogenic propellants.
Experience designing or operating ground support equipment for rocket propulsion systems.
Knowledge of automation systems and safety-critical control architectures for industrial or test environments.
Experience coordinating infrastructure or facility development in industrial or remote environments.
Demonstrated project management capability across multidisciplinary engineering activities.
Hands-on engineering mindset with strong problem-solving ability.
Excellent communication skills and ability to work across international teams.
Willingness to travel to and work periodically in the United Arab Emirates.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are seeking an experienced and highly motivated Vehicle Design Principal to drive the development of next-generation space vehicles for crewed spaceflight applications. This individual will be responsible for leading the vehicle mechanical design development effort from early concept and architecture definition through qualification and flight readiness, ensuring the successful delivery of safe, reliable, and high-performance hardware.
As a key technical leader within the Engineering organization, the Vehicle Design Principal will play a central role in shaping strategy, developing team capabilities, mitigating technical risks, and ensuring mechanical systems meet demanding performance, reliability, schedule, and cost objectives.
Technical Leadership
Lead the creation and development of detailed CAD models, assemblies, and technical drawings of the vehicle, primary and secondary vehicle structural elements, and mechanical systems.
Lead the development of the overall system layout, including component accommodation and interface definition, applying a top-down design approach and managing complex, large assemblies.
Ensure compliance with industry standards, human-rating requirements and quality processes throughout the product lifecycle.
Vehicle Architecture
Establish vehicle design, layout, structural elements, and drive key design decisions.
Conduct trade studies, mechanical simulation, and analytical assessments to optimize performance, reliability, manufacturability, and cost.
Review and perform preliminary mechanical analysis including first order sizing and specification of structures, and structural Finite Element Analysis (FEA).
Provide models and necessary information for structural static & dynamic, thermal, and other system-level analyses.
Own mechanical technical requirements and contribute to long-term strategy and innovation roadmaps.
Program Execution
Plan, coordinate, and oversee development activities to achieve technical, schedule, and budget objectives.
Lead development and qualification including verification, validation, certification, and flight-readiness activities.
Manage Product Lifecycle Management workflows, Bill of Materials configurations, and Interface Control Documents.
Identify and mitigate technical risks, resolve anomalies, and deliver qualified flight hardware aligned with program milestones.
Team Leadership & Capability Development
Build, lead, and develop a high-performing multidisciplinary mechanical team.
Provide technical mentorship to engineers.
Foster a culture of technical excellence, accountability, collaboration, and continuous improvement.
Stakeholder, Supplier & Cross-Functional Management
Lead technical interactions with suppliers, development partners, and external stakeholders, including component selection, procurement, oversight, and acceptance activities.
Collaborate closely with subsystems, MAIT, and program teams to ensure successful system integration.
Communicate technical status, risks, and recommendations while ensuring alignment between mechanical activities and broader vehicle development objectives.
B.S. in Mechanical Design, Aerospace Engineering, Engineering Technology, or similar related discipline.
10+ years of relevant engineering experience. Relevant advanced degrees will be considered in lieu of equivalent experience.
System mindset with a proven capability of understanding and managing complex systems.
Demonstrated experience designing, integrating, and testing space systems, vehicles, or component/subsystems including direct experience in one or more of the following areas of development: structure design and analysis, manufacturing, integration and test.
Experience designing structural components.
Experience with CAD and lifecycle management tools, incorporating plumbing and/or electrical harness routing in 3D and finite element analysis software.
Understanding of environmental testing, such as vibration, shock, acoustic, and/or thermal vacuum (TVAC).
Experience working with external customers such as commercial companies and government agencies (NASA, AFRL, DARPA, etc.).
Due to federal regulations (e.g., ITAR/EAR), applicants must be U.S. citizens or lawful permanent residents (e.g., current Green Card holders).
Location: Houston, TX.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
In addition to Nyx, we are actively developing Typhoon, the largest full-flow staged combustion engine ever to be built in Europe.
We are looking for a talented Senior Additive Manufacturing Materials Engineer to join our mission and contribute significantly to the development and in-house production of additive manufacturing (AM) technologies for our propulsion products powering all our space vehicles.
The ideal candidate will play a key role in the qualification and development of AM processes, including the definition and characterization of print parameters for new materials on larger, more productive machines. This role also involves supporting the certification of AM components to meet high industry standards, including NASA regulations. You will help implement large-scale Directed Energy Deposition (DED) processes and develop functionally graded or bi-metallic components. This is a versatile position with broad hands-on responsibilities in additive manufacturing reporting to TEC's Lead for AM.
Develop and execute materials development and maturation plans for new processes using established alloys, and for existing processes with new alloys.
Serve as a Materials Engineer for AM projects, collaborating with cross-functional teams to support the development and production of innovative components and systems.
Operate AM machines in a development environment as needed.
Assist in the development of new alloys for AM, including maturation of atomization methods and creation of powder specifications.
Support the qualification and testing of AM processes to ensure compliance with industry standards and performance requirements.
Responsible for onsite materials and powder characterization equipment & laboratory, including selection of equipment, budget for consumables and maintenance, training and standard operating procedures.
Collaborate on the certification of AM processes and parts, particularly those required to meet NASA and aerospace standards.
Develop post-process heat treatment procedures and specifications.
Document results and contribute to technical reports and procedures related to AM process qualification and development.
Troubleshoot and improve AM processes for enhanced performance and reliability.
Stay up to date with the latest advancements in AM technologies and materials.
Act as an onsite quality organization delegate.
Engineering degree in Materials Science , Metallurgy, Welding or a related field.
Experience with AM processes such as laser powder bed fusion and directed energy deposition.
Strong knowledge of material properties, behavior, testing, and characterization—especially metals used in aerospace propulsion applications.
Familiarity with additive manufacturing standards, including NASA or aerospace industry standards, is highly desirable.
Experience working in an ISO 9001 or similar manufacturing environment producing and delivering hardware.
Extreme sense of ownership and responsibility for work assigned, striving to complete on-time , exceptional quality, and under budget.
Strong analytical skills and a hands-on approach to problem-solving.
Excellent communication skills and ability to work collaboratively in both internal and external teams.
Ability to manage multiple tasks and adapt to a dynamic work environment.
Experience with materials modeling, including microstructure and property prediction.
Proficiency in CAD and simulation software (e.g., NX Suite, ANSYS).
Familiarity with process qualification and statistical analysis tools.
Knowledge of quality control methodologies for AM parts, including non-destructive testing (NDT).
Please note that applications are only considered from nationals of one of the following States: Austria, Belgium, Czechia, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Luxembourg, the Netherlands, Norway, Poland, Portugal, Romania, Slovenia, Spain, Sweden, Switzerland, the United Kingdom and Canada, Cyprus, Latvia, Lithuania and Slovakia.
According to the ESA Convention, staff shall be recruited on the basis of their qualifications, taking into account an adequate distribution of posts among nationals of the Member States.
The working languages of the Agency are English and French. A good knowledge of one of these is required. Knowledge of another Member State language would be an asset.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We want you as a talented and experienced Electrician to help us in our mission by developing Hardware-in-the-Loop platforms for our Future Projects. You will be part of the Future Systems team, reporting to the Principal Engineer of the project and working closely with the other engineering disciplines.
As an Electrician-HIL, your role will evolve as our testing capabilities grow. Initially, your day-to-day responsibilities will include, but not be limited to:
Design, build and wire HIL test benches, racks, and electrical harnessing for spaceflight and ground test systems
Assemble and integrate electrical infrastructure for HIL environments, including power distribution, signal routing, grounding and shielding
Support setup and operation of HIL test benches, integrating hardware with simulators, instrumentation and test equipment
Diagnose and troubleshoot signal integrity issues, intermittent connections, grounding problems, and EMI/EMC-related effects
Maintain, modify and repair test equipment wiring, connectors, harnesses and supporting electrical infrastructure
Maintain accurate wiring schematics, cable lists, test logs, and configuration documentation
Collaborate with HIL engineers, System Engineers and software teams to support test readiness and failure investigations
Contribute to continuous improvement of HIL hardware design, build process and safety practices
In the role as Electrician - HiL ideally, you will bring the following experience and skills:
Technical diploma or bachelor's degree in electrical engineering, mechatronics, or related field
3+ years of hands-on electrical work, preferably in aerospace or high-reliability/safety-critical environments
Demonstrated experience assembling and wiring HiL test benches, racks, or complex test setups
Strong ability to interpret electrical schematics, wiring diagrams, pin‑outs, and harness drawings
Familiarity with aerospace or industrial standards (e.g., ECSS, MIL‑STD, IPC, or equivalent)
Practical experience in cable and harness fabrication, including crimping, soldering, heat‑shrinking, and connector assembly
Proficiency with electrical and electronic test equipment, such as multimeters, power supplies, oscilloscopes, signal generators, and harness testers
Solid understanding of EMI/EMC best practices, grounding concepts, and shielding technique
Experience with spacecraft avionics, GSE, or propulsion test systems is a plus
High attention to detail, strong workmanship standards, and a safety‑first mindset
Ability to work independently while collaborating effectively within a multidisciplinary team
Skills and Behaviors
Strong oral and written communication skills
Strong analysis and problem-solving skills
Strong organizing and prioritization of tasks
Positive and flexible attitude to get the job done
Ability to communicate at all levels of the business
Demonstrates behaviours consistent with The Exploration Company’s core values of Mission, Vision, Integrity, Excellence and Teamwork
Space enthusiast: ready to change the global space industry
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We operate in a project‑driven aerospace manufacturing environment, scaling rapidly across multiple countries, legal entities, and programmes. Reliable, well‑governed financial systems are critical to enabling growth while maintaining control, credibility, and auditability.
We are looking for a Financial Systems Business Partner to act as the functional owner of financial system automation and master data governance, with Odoo as the financial backbone.
You will sit at the intersection of Finance, Engineering, and Enterprise Systems, translating financial control needs into scalable system solutions. You will design, improve, and help operate financial processes across projects, departments, and legal entities.
This is a hands‑on role: you will configure, analyse, challenge, automate, and continuously improve how financial data flows through the organisation.
Act as Finance’s primary system counterpart for Odoo and adjacent financial tooling
A custodian of finance‑related master data, ensuring consistency, quality and traceability
Design and continuously improve financial workflows across:
Treasury
Financial Planning & Analysis (FP&A)
Accounting and controlling
Identify manual, fragile, or inconsistent processes and drive automation and standardisation
Ensure master data structures support project‑based, multi‑entity operations
Help define and enforce ownership, change processes, and controls for financial reference data
Support integrations, upgrades, and other digitalisation initiatives in the finance domain
Hands‑on experience with ERP systems (Odoo not required, but strongly desirable)
Proven experience with financial systems, controlling, or finance transformation
Strong understanding of financial workflows across multiple disciplines and domains
Strong analytical skills; comfortable working with complex, multi‑dimensional and evolving datasets
Critical thinker & strong communicator
Background in finance transformation, consulting, or systems implementation
Experience in manufacturing, aerospace, or other high‑reliability industries
Exposure to BI and reporting tools (Power BI, Metabase, Tableau or similar)
Experience in multi‑entity, multi‑currency, multi‑country environments
Technical proficiency with SQL and data modeling, and proficiency with at least one general purpose programming language.
During the interview process, candidates will be asked to present a case study on designing a multi-entity financial architecture & workflows in Odoo — covering budgeting, manufacturing costing, cashflow planning, and banking orchestration for a high-growth aerospace environment. We run a mature Odoo implementation; this role is about scaling and optimisation, not building from scratch. Deep financial systems expertise and strong Odoo knowledge is expected.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We want you as a talented AIT EGSE Test engineer to help us in our mission by supporting the design, maintenance and documentation of the EGSE architecture required to ensure that our mission will succeed and our system will work in space!
In your role as an AIT EGSE engineer, your role will include the following responsibilities:
Define and assess EGSE needs for testing activities (flight mode as well as engineering models and test beds)
Design, build, troubleshoot and maintain EGSE architecture (hardware and software)
Prepare documentation of EGSE
Manufacture EGSE components
Support of the test team during testing activities
Participation in environmental tests and launch campaigns
In the role of AIT EGSE engineer, ideally you will bring the following skillset, mentality and experience:
Degree in Aerospace Engineering, Electrical Engineering or comparable qualification
Theoretical understanding as well as practical experience with electrical/electronic components/ systems as well as IT network infrastructure:
physical assembly of EGSE (building racks, routing cables, etc.)
network configuration (segmentation, subnetting, etc.)
network protocols (TCP/IP), access control, security/firewall concepts
Ability to develop software in Python, LabVIEW, etc.
Exposure to Mission Control Software platforms like CCS5, COSMOS or similar
Experience with solar array testing, Experience with communication and power EGSE.
Ability to read, understand and apply technical manuals, data reports, mechanical & electrical schematics and design specifications
Joy in embracing technical problems and the process of solving them
Sense of responsibility and a clean and organized way of working
Fluent in written and spoken English
Willingness to travel worldwide for test and launch campaigns
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
The holder of this position will have duties towards the development of suppliers and support to the Manufacturing, Assembly, Integration and test function.
Key Responsibilities:
In the Supply Chain Quality area
Provide inputs for Supplier / Subcontractor quality requirements for Proposals, and Contracts.
Perform surveillance activities of contract execution for what it pertains Quality Aspects.
Engage with Suppliers /. Subcontractors on the resolution of Non conformances
Participate and contribute in contracted Quality and Engineering gates.
Accept subcontracted products and deliverables through the participation of Delivery Review Boards and the provision of certificates of acceptance.
In the MAIT Quality Area
Planning & Execution of Quality Inspections:
In collaboration with the MAIT and Product Assurance team, define and execute inspection control activities at:
Incoming
Key stages of manufacturing, assembly, integration & testing.
Before release to customers or next integration phase.
Nonconformance Management
Support the detection, documentation and containment of nonconformances.
Assist in Material Review Board (MRB) activities and follow up on rework or repair implementation and verification.
Lead root cause analysis (RCA) and corrective/preventive actions in coordination with engineering and MAIT.
Quality Assurance support in MAIT Operations:
Provide day-to-day quality support to MAIT.
Review and approve MAIT procedures.
Monitor and enforce compliance with internal procedures, customer requirements, space and aerospace quality standards (e.g., AS9100).
Qualification of Special processes based in EN9100 (e.g: welding, Non-Destructive Testing, etc). Desirable experience with welding.
Train MAIT staff on quality procedures and best practices.
Calibration coordination.
Continuous Improvement:
Lead quality improvement projects to enhance process stability and product quality.
Collaborate with design, manufacturing, and supply chain teams to improve product quality.
Analyze quality data and generate reports to track trends and identify areas for improvement.
Required Skills & Qualifications:
Bachelor’s degree in engineering or a related field.
Minimum 3 years of experience in a quality assurance role, preferably in aerospace, space, defense, or other high-reliability manufacturing environments.
Knowledge of quality standards (e.g., EN/AS9100, ISO 9001).
Strong understanding of manufacturing processes, inspection techniques (visual, dimensional, electrical), and GD&T.
Experience with nonconformance management systems and root cause analysis tools (e.g., 8D, 5-Whys, Ishikawa).
Proficiency in quality tools such as FMEA, control plans, and statistical analysis.
Proficient in Microsoft Excel and desirable experience with Power BI or similar data visualization tools.
Ability to work cross-functionally in a dynamic environment.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We want you as a talented System Engineer to help us in our mission by assisting in the preparation and execution of functional and environmental tests, maintaining requirement traceability, and documenting results to support verification closure. Working closely with senior engineers and multidisciplinary teams, you help ensure the Nyx perform as intended throughout the mission lifecycle.
Key Responsibilities
In your capacity as a System Engineer, your role will continuously evolve, but initially your day-to-day duties will include:
Support the definition and implementation of the Nyx Earth system integration and verification activities, which meets technical and programmatic requirements and considers the adequacy of model philosophy, facilities availability, planning and costing.
Define test plans and specifications with clear Success Criteria and support the generation of test procedures with the team.
Support the preparation, organization and execution of the spacecraft functional system campaigns to ensure the closure of all system safety and performance requirement, including nominal and off nominal spacecraft behaviors.
Coordinate the integration and test of subsystems and components to ensure alignment and connectivity of the higher-level integrated systems
Organize the reviews and preparation of related data packages in support of integration and verification activities.
Generate reports and products that drive the closure of verifications associated with the events.
Collaborate with all Functional Chain responsible and engineering disciplines to prepare and perform the tests.
Process the anomalies occurring during the test campaign in coordination with the Product Assurance Team and the rest of the Engineering Team.
What we would love to see from you
In the role of AIV Engineer ideally, you will have the following:
1 to 5 years of experience in systems design, analysis, and testing of aerospace or space-related systems.
Hands-on hardware experience.
Practical experience / contact with functional test platforms, such as software in the loop, hardware in the loop, and bench testing.
Experience working with spacecraft requirements, NASA standards, and ECSS Standards
Experience in the development and verification of space hardware.
Spacecraft systems knowledge, with a focus on flight software, avionics, and guidance, navigation, and control.
Skills and Behaviours
Strong oral and written communication skills
Strong analysis and problem-solving skills
Strong organizing and prioritization of tasks
Positive and flexible attitude to get the job done
Ability to communicate at all levels of the business
Demonstrates behaviors consistent with The Exploration Company’s core values of Mission, Vision, Integrity, Excellence and Teamwork
Space enthusiast: ready to change the European space industry
Ability to thrive in a high paced development environment
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are also developing advanced propulsion capabilities to support our reusable spacecraft programs. We are building a dedicated test capability for storable, hypergolic propulsion systems in the 100–800 N class.
As the Vacuum Hotfire Test Stand Engineer, you will be part of the team that develops the propulsion test facility for legacy propellants (e.g., MON-class oxidizers and MMH-type fuels), from requirements definition through commissioning and operating the test facility. You will be part of the team that develops, commissions and operates the test facility.
Design of Test Facility
Supporting development of a vacuum hot fire test facility which will be used to develop and qualify orbital thrusters - in tandem with the main designer/team leader
Translate propulsion test needs into facility, utilities, and ground support equipment requirements
Define instrumentation, data acquisition, and control systems for safe hot-fire testing.
Interface effectively with internal engineering teams, customers, and external partners.
Assembly & Integration of Test Facility
Manage suppliers and manufacturing activities; support in integration and verification.
Support planning and execute commissioning, acceptance testing, and entry-into-service activities.
Safety & Operation of Test Facility
Support hazard analyses (FMEA, HAZOP, risk assessments) and implement mitigation measures.
Develop procedures for handling, testing, maintenance, and emergency response.
Integration of thruster into test bench
Support operations of test facility and perform hot fire, cold flows, decontamination and maintenance activities
Perform maintenance activities of the test facility
Degree in aerospace, propulsion system, mechanical, chemical engineering, or a related discipline.
2+ years of hands-on experience with propulsion test benches, preferably with storable/legacy propellants.
Strong background in fluid systems, pressurized systems, and ground support equipment.
Knowledge of safety-critical systems, industrial automation, and test operations.
Excellent communication skills across technical and non-technical stakeholders.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We want you as a talented Radiation Test and Automation Engineer to help us in our mission by participating in the qualification of the electronic parts that will compose our Nyx Avionics system.
In your capacity as a Radiation Test and Automation Engineer, your role will be continuously evolving, but day to day your duties will include:
Assembly of radiation test PCBs for components to be tested
Test of the assembled PCBs and debugging of circuits in the laboratory
Soldering and adapting of parts if needed
Automation of radiation test setups and test report generation
Attending the radiation test campaign at the particle accelerator facility, if required
Understanding the effects of radiation to electronic circuits and create comprehensive test reports
In the role of Radiation Test and Automation Engineer ideally, you have collected some experience with the following:
A masters/bachelor's degree in electronic science or engineering / Physics / embedded systems design
Hands-on soldering and debugging experience of electronics circuits
Basic knowledge of verification and validation of avionics and embedded software
Experience with Python for test automation and control of devices and data visualization
Digital and Analog Electronic Design Knowledge
Experience with Altium Designer and LTSPICE or comparable software solutions is a plus
Basic understanding of space avionics is a plus
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
To support this mission, we are bringing harness manufacturing in-house and are looking for a Wire Harness Technician to help industrialize, build, and validate high-reliability electrical harnesses used across the Nyx avionics and test campaigns.
In this role, your scope will be continuously evolving. Day-to-day you will help translate harness design outputs into robust manufacturing processes and deliver flight-like and test harnesses with strong quality, repeatability, and documentation.
In your capacity as a Wire Harness Technician, your responsibilities will typically include:
Manufacturing & Assembly Execution
Build electrical harnesses (development, qualification, and test harnesses), including cut/strip, crimp, splice, solder (where applicable), lacing/tie, over-braid/shield terminations, labeling, and final assembly.
Support batch-by-batch production for test campaigns and verification activities (e.g., shock/vibration, EMI/EMC, TVAC), coordinating readiness of parts, tooling, and work instructions.
Cross-functional Collaboration
Work closely with harness design and integration stakeholders to ensure manufacturability (DFM), clarity of drawings, and alignment between wiring diagrams and physical assembly.
Documentation & Traceability
Maintain “as-built” records, deviations, rework logs, and configuration/serial tracking for harnesses and critical components.
For the Wire Harness Technician role, you ideally bring experience with the following:
Technical vocational training (Ausbildung) in electrical, electronic, or mechanical fields (e.g. Elektroniker, Mechatroniker) or equivalent hands-on experience.
Strong hands-on experience with wiring harness manufacturing or cable assembly in high-reliability contexts (aerospace/space, aviation, motorsport, defense, medical, or similar).
Ability to interpret harness drawings, wiring diagrams, BOMs, and connector tables; comfortable working from controlled documentation and detailed work instructions.
Solid understanding of harness workmanship principles (crimp quality, strain relief, routing/bend radius, shielding/grounding practices, backshell assembly and torqueing, etc.).
Practical troubleshooting skills (identifying pinning errors, shorts/opens, intermittent faults, damaged contacts, shielding issues, etc.).
Experience using typical harness assembly tools (crimp tools, wire strippers, insertion/extraction tools, torque tools, soldering equipment when applicable).
High attention to detail and manual dexterity, with a strong focus on quality and workmanship standards (preferably IPC/WHMA awareness).
Ability to follow precise processes and work instructions while maintaining consistency and traceability during production.
Comfortable working in a fast-paced production or test environment where priorities can shift based on integration and delivery needs.
Team-oriented mindset with clear communication with engineering and quality teams when issues arise.
Familiarity with aerospace/space workmanship standards and inspection approaches (e.g., IPC-style workmanship, connector acceptance criteria, traceability practices).
Experience with harness electrical test equipment and automated test report generation.
Understanding of EMI/EMC-sensitive build practices (shield termination strategies, pigtail control, bonding/grounding considerations), aligned with the fact that harnesses support EMI/EMC test activities.
Prior experience supporting test harness builds for environmental testing (vibration, thermal-vac, etc.).
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We want you as a talented CAD designer to help us in our mission by modelling the physical architecture of our spacecraft.
You will be successful in this role if you are able to help us:
● To contribute to the definition of our overall vehicle architecture,
● To contribute to the detailed definition of our vehicle.
To build the CAD physical models of the vehicle and their sub-systems on Siemens NX (CAD tool) or equivalent and contribute to the choices in terms of overall architecture, aeroshape, equipment accommodation and main materials.
To lead the design of aerospace components and systems using advanced CAD software.
To maturate the CAD models by adjusting the architecture, accommodation, structure materials and thicknesses based on the outcomes of the thermo-mechanical computation loops and system trade-offs.
To collaborate closely with thermal and structural analysts, materials and manufacturing engineers to ensure compliance of the physical architecture with the mission environments and manufacturing constraints.
To maintain the configuration management of the CAD models.
To manage the vehicle structure mass budget aided by the CAD model, and tracked in the overall system database.
To contribute to co-engineering sessions with the mission analysis, propulsion, avionics, GNC and system engineers, by sharing guidelines or orders of magnitude in order to converge on the feasibility of a solution, based on engineering feeling or simplified analytical approach.
To define the volume allocations and clearance specifications towards the vehicle sub systems.
To contribute to the improvement of CAD tools and processes.
To effectively communicate and provide recommendations through the analysis, preparation, and presentation of technical data.
To provide technical documentation and drawings and participate to reviews of designed systems.
An advanced degree in mechanical, aerospace or manufacturing engineering.
Minimum of 5 years of experience as CAD design Engineer.
Experience with CAD software such as Siemens NX.
Strong knowledge on aerospace vehicle design and associated challenges.
Strong understanding of aerospace materials, manufacturing processes, and industry standards.
Experience in Composite design is a plus.
Experience with finite element analysis (FEA) is a plus.
Fluent in English. German and French is an asset.
Strong oral and written communication skills.
Strong analysis and problem-solving skills.
Strong organising and prioritisation of tasks.
Positive and flexible attitude to get the job done.
Demonstrates behaviours consistent with The Exploration Company’s core values of Vision, Mission, Teamwork, Integrity and Excellence.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
Our In-Orbit Services unit is dedicated to expanding and complementing these capabilities by conceptualizing and developing new technologies, products and programs.
We are seeking a methodical Fault Management Engineer to help us strike the right balance between performance and reliability. The In-Orbit Services Fault Management Engineer is responsible for ensuring the reliability, availability, maintainability, and safety of orbital service vehicles and systems. This role is central to the design, development, and operational assurance of in-orbit service missions, supporting both technical risk reduction and mission success.
Fault Management Strategy:
Define, implement and validate fault management strategies, including Failure Detection, Isolation, and Recovery (FDIR) logic for in-orbit service vehicles.
Coordinate between hardware and flight software teams to architect robust and lean fault management solutions.
RAMS Analyses & Assurance:
Lead the definition and execution of fault tree analyses (FTA) and Failure Modes, Effects, and Criticality Analyses (FMECA) to identify and mitigate potential failure modes.
Perform reliability and availability prediction studies and allocate reliability targets to subsystems and equipment.
Conduct hazard analyses for ground, orbital, and re-entry phases, ensuring compliance with relevant safety requirements, including the safety analysis for launch authorities.
Continuous Improvement:
Collect and analyze in-orbit data to inform lessons learned and drive improvements in fault management and overall system reliability.
Support the creation and improvement of RAMS analysis tools and technical documentation.
Collaboration & Communication:
Work closely with multidisciplinary engineering teams (mechanical, thermal, avionics, software, operations, systems) to integrate RAMS and fault management requirements throughout the project lifecycle.
Prepare and present technical data, recommendations, and reports to internal and external stakeholders.
In the role of In-Orbit Services Fault Management Engineer, ideally you will have the following:
Education: Advanced degree (Master’s or PhD) in engineering, aerospace, or a related field; specialization in electronics, system engineering or fault management is a plus.
Technical skills: Proficiency in reliability tools (FMECA, FTA, reliability block diagrams) and fault management methodologies.
Experience: Hands-on experience with spacecraft FDIR strategy definition and validation planning and execution.
Communication: Excellent written and verbal communication skills, with the ability to convey technical concepts to non-technical stakeholders.
Feedback: Willingness to give proactive and mindful feedback across all company levels.
Mindset: Highly motivated to work in a fast paced, autonomously driven, and demanding start-up environment.
Languages: Fluent in English.
Please note that applications are only considered from nationals of one of the following States: Austria, Belgium, Czechia, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Luxembourg, the Netherlands, Norway, Poland, Portugal, Romania, Slovenia, Spain, Sweden, Switzerland, the United Kingdom and Canada, Cyprus, Latvia, Lithuania and Slovakia.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
Storm is TEC’s high-performance liquid rocket engine program, developed to support next-generation launch and space transportation applications. The Storm development strategy relies heavily on ground testing, from early development models to qualification and acceptance campaigns. The engine test bench is a critical enabler of the program, and its on-time delivery is essential to maintain the Storm development schedule.
As Storm Engine Test Bench Program Manager, you are responsible for driving the on-time delivery of the Storm engine test bench development program. You will ensure execution discipline across the bench development workstream: integrating schedules, tracking deliverables, coordinating stakeholders and suppliers, anticipating blockers, and escalating decisions to keep the program on track. In addition, you will act as the primary point of contact for identifying and securing a suitable test bench location, coordinating the site selection process with internal stakeholders and external parties.
Build, maintain, and continuously improve the integrated test bench delivery plan (design maturity gates, procurement lead times, manufacturing, installation, integration, and commissioning support activities).
Own the critical path, dependencies, and milestone readiness criteria (from a delivery perspective).
Track progress, identify schedule threats early, and drive recovery plans (re-sequencing, parallelization, expediting, resourcing proposals).
Maintain program routines (weekly reviews, action tracking, decision logs) to ensure execution discipline.
Animate weekly/monthly routines: bench program reviews, schedule reviews, and interface meetings
Ensure alignment between propulsion engineering, test engineering, facilities/infrastructure, procurement, quality, and site teams
Prepare concise reporting for program leadership: status, risks, mitigation, upcoming decisions, and milestone readiness
Coordinate preparation of key internal reviews (bench concept reviews, design/package readiness, delivery readiness checkpoints)
Act as the single point of contact to identify, assess, and secure a test bench location aligned with the Storm schedule and development needs.
Coordinate the site selection process (timeline, stakeholder alignment, decision gates, and documentation) and ensure decisions are taken in time to protect the critical path.
With support from the engineering team (who define requirements and technical needs), consolidate the test site needs impacting the choice of location and translate them into:
A practical location assessment checklist (capabilities, utilities, access, constraints)
A comparison of candidate sites (schedule, cost, readiness, risks)
Clear decision packages for leadership (trade-offs, recommended option, fallback plans)
Coordinate interfaces with external stakeholders as needed (site operators, landlords/partners, utilities, local service providers), in alignment with internal owners.
Coordinate long-lead procurement tracking
Support supplier selection and onboarding (RFI/RFQ process coordination, delivery tracking, expediting)
Monitor supplier performance and ensure timely resolution of delivery issues, NCR handling coordination, and logistics readiness
Ensure documentation deliverables from suppliers are collected and integrated
Ensure prerequisites for integration/commissioning are planned and tracked: procedures availability, resources, tooling, spares, training needs and documentation readiness (owned by responsible teams)
Track open points, coordinate closure plans, and ensure readiness evidence is available for management decisions.
Support lessons-learned capture and incorporation into the next iterations of bench capability
Master’s degree (or equivalent) in Aerospace Engineering, Mechanical Engineering, Systems Engineering, or similar
Significant experience delivering complex test infrastructure or propulsion tests programs
Proven program management experience (planning, budgeting, risk, suppliers)
Strong understanding of propulsion testing, cryogenic systems, and hazardous operations
Experience with LOX/methane engine testing or cryogenic facilities
Familiarity with European space programs and standards (e.g. ECSS, ESA‑style reviews)
Experience with regulated industrial sites, permitting, or environmental compliance
Background in high‑cadence test operations
Ability to lead cross‑functional teams and make sound technical and operational decisions
Strong ownership and delivery mindset
Systems‑level thinking and interface management
Calm decision‑making during high‑pressure test activities
Strong documentation and reporting discipline
Fluent in English; French or German is a plus.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
In addition, we are developing advanced propulsion capabilities to support our reusable spacecraft programs. We are building a dedicated test capability for storable, hypergolic propulsion systems in the 100–800 N class.
As a Vacuum Hotfire Test Stand Senior Engineer, you will lead the end-to-end development of a propulsion test facility for legacy propellants (e.g., MON-class oxidizers and MMH-type fuels), from requirements definition through commissioning and operating the test facility. You will manage the team that develops, commissions and operates the test facility. This position requires technical excellence and expertise as well as team management skills.
Design of Test Facility
Develop a vacuum hot fire test facility which will be used to develop and qualify orbital thrusters
Capture and define system-level requirements for a chemical propulsion test bench supporting 100–800 N thrusters.
Define performance envelopes, safety objectives, operability constraints, and verification methods.
Translate propulsion test needs into facility, utilities, and ground support equipment requirements
Define instrumentation, data acquisition, and control systems for safe hot-fire testing.
Interface effectively with internal engineering/design teams, customers, and external partners.
Assembly & Integration of Test Facility
Define the schedule and conditions of the bench integration. Define the tests to be performed all along the project, to mitigate the risks to find issues during commissionning.
Manage suppliers and internal manufacturing activities; oversee integration and verification.
Plan and execute commissioning, acceptance testing, and entry-into-service activities.
Safety & Operation of Test Facility
Lead hazard analyses (FMEA, HAZOP, risk assessments) and implement mitigation measures.
Develop procedures for handling, testing, maintenance, and emergency response.
Validate redlines and abort sequences for different failure cases
Integration of thruster into test bench
Lead operations of test facility and perform hot fire, cold flows, decontamination and maintenance activities. It's possible that at one point, the operations would be handover to another testing team and then insure a smooth and well documented handover if needed.
Leadership / Team management
As a Team Leader we expect you to drive and support a small multidisciplinary team to design, procure, assemble, and install and commission the test bench.
You will manage the team tasks and priorities and partially HR/training and developpement topics
Degree in aerospace, propulsion system, mechanical, chemical engineering, or a related discipline.
5+ years of hands-on experience with propulsion test benches, preferably with storable/legacy propellants.
Strong background in fluid systems, pressurized systems, and ground support equipment.
Demonstrated experience delivering complex engineering facilities from concept to commissioning.
Knowledge of safety-critical systems, industrial automation, and test operations.
Experience with site qualification, permitting, or regulated industrial environments.
Excellent communication skills across technical and non-technical stakeholders.
Experience in vacuum test facility design and operation
Experience with team management would be a plus
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are looking for a hands-on and rigorous AIT Test Technician to support the preparation, integration, execution, and reporting of environmental and functional test activities for spacecraft sub-systems and hardware.
This role is critical to ensuring that all testing activities are executed safely, accurately, and according to procedures and quality standards. The ideal candidate is meticulous, structured, technically skilled, and comfortable operating in a fast-paced aerospace development environment.
Support the setup, integration, and execution of environmental tests including:
Vibration testing
Shock testing
Thermal Vacuum (TVAC) testing
Ancillary testing activities
Prepare hardware, tooling, instrumentation, and Ground Support Equipment (GSE) for test campaigns.
Install thermocouples, accelerometers, harnessing, and instrumentation according to test procedures and engineering requirements.
Operate environmental test equipment including vibration shaker, shock test facility, TVAC facility, and associated monitoring systems.
Perform pre-test and post-test inspections of test setups.
Support testing activities both internally and at external test facilities.
Prepare and execute test procedures with adherence to safety, cleanliness, and quality standards.
Ensure all operations are properly documented and traceable.
Report, anomalies, and observations during operations.
Verify that tools, instrumentation, and measurement equipment comply with calibration requirements before use.
Maintain and organize tooling, sensors, adapters, cables, and test equipment.
Monitor the condition and calibration status of test assets and measurement equipment.
Perform first-level maintenance and troubleshooting on test equipment and support systems.
Support the integration and validation of new tooling and test setups.
Assist engineers in defining and improving test processes, setups, and operational workflows.
Ensure laboratory and test areas remain organized, safe, and operationally ready.
Technical degree or vocational training in aerospace, electronics, mechatronics, industrial systems, or a related technical field.
Experience in aerospace, automotive, defense, industrial testing, or other high-reliability technical environments.
Hands-on experience with environmental testing equipment such as vibration tables, thermal chambers, or instrumentation systems is highly desirable.
Familiarity with laboratory operations, instrumentation installation, and mechanical integration activities.
Experience working with calibrated equipment, controlled procedures, and technical documentation is a strong plus.
Ability to read and follow technical procedures and engineering drawings.
Experience with mechanical assembly and test setups.
Basic understanding of sensors and instrumentation systems.
Familiarity with torque tools, measurement equipment, and laboratory/test equipment.
Knowledge of safety procedures related to environmental testing activities.
Basic troubleshooting and problem-solving capabilities in technical environments.
Strong rigor and attention to detail.
Structured and disciplined way of working.
Hands-on mindset with a proactive attitude.
Ability to identify and communicate anomalies clearly and accurately.
Team player with good communication skills.
Reliable, organized, and accountable.
Comfortable working in fast-paced and evolving environments.
Excellent communication skills in English.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
As a talented Valve Development Engineer, you will lead the design and development of solenoid isolation valves for our storable propulsion system, from concept through qualification — owning the electromagnetic, mechanical, and sealing design that makes the valve work reliably over the mission life.
Valve Design & Development
Support the design of solenoid isolation valves from concept through qualification, balancing performance, mass, reliability, and manufacturability.
Define and mature valve architecture — poppet/seat design, actuation mechanism, sealing concept — to meet functional and interface requirements.
Perform mechanical sizing and trade studies (force margins, spring rates, stroke, response time) to support design decisions.
Electromagnetic & Actuation Design
Design and analyze the solenoid actuator — coil, armature, magnetic circuit — to meet response time, power, and force margin requirements.
Collaborate with electrical engineers on coil drive electronics and EMI/EMC considerations.
Support trade-offs between actuation force, power consumption, and thermal dissipation.
Materials, Sealing & Propellant Compatibility
Select materials and seal designs compatible with storable propellants, ensuring long-term compatibility and low permeation/leakage.
Define sealing concepts — elastomeric or metal-to-metal — balancing leak-tightness, cycle life, and contamination sensitivity.
Coordinate with materials engineering on qualification of propellant-wetted materials.
Design Verification & Cross-Functional Coordination
Define and support the verification plan for valve qualification, working closely with test engineers on test setup and success criteria.
Collaborate with manufacturing engineers to ensure design manufacturability and testability.
Support anomaly investigations and root cause analysis for valve-level issues, feeding lessons learned back into the design.
You will perform your duties principally at the Company's premises in Bordeaux and may be required to travel from time to time to our company’s premises in Munich in the course of your duties.
5+ years of hands-on experience designing valves or similar electromechanical fluid components for space or aerospace applications.
Experience in solenoid/electromagnetic actuator design (magnetic circuit design, coil design) is a strong plus.
Strong understanding of sealing technology, elastomer and metal seal design, and propellant compatibility; storable propellant experience preferred.
Proficiency in CAD (CATIA, NX, or equivalent) and mechanical analysis tools.
Experience defining and supporting qualification test campaigns for valves.
Familiarity with applicable standards for valve qualification (NASA, ECSS, or equivalent).
Skills and Behaviours:
A hands-on approach to problem-solving, combined with a collaborative mindset to work across multidisciplinary teams
Excellent organizational skills and ability to multitask
Capability of working autonomously whilst collaborating productively with remote teams
Positive and flexible attitude in a constantly evolving environment
Grit to get the job done
Ability to communicate effectively with a wide variety of audiences
Behaviors consistent with The Exploration Company’s core values of Commitment, Innovation, Trust, Quality, and Teamwork
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are looking for a Senior Mission Operations Training Engineer to build, own, and execute our end-to-end mission operations training program. In this role, you will be the technical authority for operations training across the program, embedding with our software, engineering, flight operations, and recovery teams to ensure both our personnel and the astronaut crews are fully prepared.
As a Simulation Supervisor, you will work directly with the Ground Software and Flight Software teams to ensure fault-injection logic and training capabilities are built into the simulator architecture.
Key Responsibilities
Own the training concept of operations, certification pipelines, and long-term training plans for flight controllers and ISS crews
Author and maintain the core curriculum, lesson plans, and instructional materials that translate vehicle engineering into operational proficiency
Script, orchestrate, and execute high-fidelity nominal and off-nominal simulation campaigns as Simulation Supervisor
Partner with Ground Software and Flight Software teams to ensure fault-injection capabilities and training requirements are built into the simulator architecture
Coordinate with subsystem engineers, Mission Directors, and external partners (ESA, NASA, CNES) to keep training aligned with current procedures
Incorporate flight anomalies, test failures, and operational lessons learned into simulator capabilities, training flows, and vehicle design
Mentor and grow junior training engineers and simulation controllers
What we would love to see from you:
The ideal candidate will have:
Master’s degree in an engineering or science discipline.
8+ years of experience in spacecraft mission operations training or a comparable high-risk operations environment
Hands-on experience scripting and running simulation campaigns as a Simulation Supervisor, console operator, or equivalent role
Experience working directly with software development teams to define, review, and accept simulator capabilities or modeling environments
Technical knowledge of common spacecraft systems (GNC, avionics, propulsion, life support)
Demonstrated ability to translate complex systems engineering into operational training curricula and procedures
Bonus qualifications:
Experience developing training for ISS crewmembers or human spaceflight missions
Background in custom simulation tooling, fault-injection scripting, or telemetry display environments
Prior certification as a flight controller.
Direct experience with NASA, ESA, or equivalent partners on joint training plans and operational products
Mentorship experience with junior engineers while remaining a significant individual contributor
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are seeking a talented Thermal Engineer to help us in our mission by contributing to the development of our future projects. As a Thermal Systems Engineer, you will oversee the thermal architecture, sizing and analysis of a variety of new projects. You will work closely with our mechanical, CAD, and system engineers to assess feasibility and preliminary sizing of the thermal systems of our future vehicles.
In your capacity as a Thermal Engineer, your role will be continuously evolving, but day-to-day your duties will include:
Designing conceptual and preliminary thermal control systems for new space systems, tailored to project maturity and goals
Providing technical solutions to optimise thermal management, in collaboration with other subsystems (propulsion, avionics, ECLSS…)
Perform preliminary thermal analyses to justify the design decisions
Effectively communicating and providing recommendations through analyses, reviews, documentation and presentation of technical data
Supporting spacecraft development from concept to operations, including feasibility studies, trade-off analyses, requirements review, system design, and documentation for major development milestones
Managing procurement, request for proposals, supplier evaluation and selection, testing and validation of thermal hardware
Providing operational analysis and support, including post-flight analyses
In the role of Future Project Thermal Engineer ideally, you will have the following:
Education: Master’s or PhD degree in Aerospace Engineering, Heat transfer and Fluid mechanics, or another related field.
Technical skills: Thermal analysis, Thermal management of typical spacecraft subsystems (structures, avionics, propulsion), and understanding of spacecraft thermal environments
Experience: Proven experience (3+ years) with (Active) Thermal Control System development and procurement, hands-on experience with Thermal Testing, including Thermal Cycling, Thermal Vacuum and Thermal Balance tests
Programming Skills: Proficiency with thermal software (Thermal Desktop, ESATAN), and in programming and data analysis (e.g., Python, MATLAB, C++).
Communication: Excellent written and verbal communication skills, with the ability to convey technical concepts to non-technical stakeholders.
Feedback: Willingness to give proactive and mindful feedback across all company levels.
Mindset: Passion for advancing sustainability in the space industry and highly motivated to work in a fast paced, autonomously driven, and demanding start-up environment.
Languages: Fluent in English.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We want you as a talented MAIT Mechanical Technician to help us in our mission by:
Taking care of the assembly of the Nyx Capsule, in collaboration with the AIT mechanical and GSE team, in close relationship with other Mechanical Technicians and under the supervision of the MAIT mechanical engineers.
Supporting the AIT propulsion and thermal assembly and tube bending in collaboration with AIT Propulsion, AIT Thermal and AIT FGSE engineers.
Supporting welding activities to be performed in TEC.
Conduct regular assembly operations for our capsules, including bonding applications, thermal protection installations, and general assembly tasks, following procedures and documenting all anomalies or deviations.
Provide support for pressure testing of propulsion and thermal systems, ensuring all welded and assembled components meet required standards.
Perform basic welding tasks for various components using orbital welding techniques, focusing on propulsion and thermal systems.
Assist in the resolutions of anomalies happening during the integration and tests.
Assist in environmental testing activities, including instrumentation installation, handling, and preparation of test setups.
Support to set up a good work environment, for example, identifying any missing tools to perform all the mechanical activities.
What we would love to see from you:
Mechanical or Electro-Mechanical qualification as a Technician.
Versatile with assembly tasks, including occasional handling of specialized instruments and tooling.
Proficient in following safety standards and maintaining quality control measures during all assembly and welding operations.
Knowledge of ESA and NASA quality and safety standards.
English speaker.
Desirable:
A previous experience (2/3 years) in building space vehicles.
Experience in welding, especially with aluminium orbital welding.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are seeking an experienced and highly motivated Engine Principal to drive the development of next-generation high-thrust hypergolic propulsion systems for crewed spaceflight applications. This individual will be responsible for leading the engine development effort from early concept and architecture definition through qualification and flight readiness, ensuring the successful delivery of safe, reliable, and high-performance propulsion hardware.
As a key technical leader within the organization, the Engine Principal will play a central role in shaping propulsion strategy, developing team capabilities, mitigating technical risks, and ensuring propulsion systems meet demanding performance, reliability, schedule, and cost objectives.
Technical Leadership
Lead the end-to-end development of high-thrust hypergolic rocket engines from concept through flight readiness.
Lead preparation and execution of major program reviews (SRR, PDR, CDR, TRR, etc.), supporting certification activities and customer reviews.
Ensure compliance with industry standards, human-rating requirements, and quality processes throughout the product lifecycle.
Engine Architecture
Establish engine architecture and drive key design decisions.
Conduct trade studies, simulation, and analytical assessments to optimize engine performance, reliability, manufacturability, and cost.
Own propulsion technical requirements and contribute to long-term propulsion technology strategy and innovation roadmaps.
Program Execution
Plan, coordinate, and oversee engine development activities to achieve technical, schedule, and budget objectives.
Lead development and qualification, including verification, validation, certification, and flight-readiness activities.
Identify and mitigate technical risks, resolve anomalies, and deliver qualified flight hardware aligned with program milestones.
Team Leadership & Capability Development
Build, lead, and develop a high-performing multidisciplinary propulsion team.
Provide technical mentorship to engineers and technicians.
Foster a culture of technical excellence, accountability, collaboration, and continuous improvement
Stakeholder, Supplier & Cross-Functional Management
Lead technical interactions with suppliers, development partners, and external stakeholders, including component selection, procurement, oversight, and acceptance activities.
Collaborate closely with systems engineering, avionics, MAIT, and program teams to ensure successful propulsion system integration.
Communicate technical status, risks, and recommendations while ensuring alignment between propulsion activities and broader vehicle development objectives.
B.S. in Aerospace, Mechanical Design, Engineering, Engineering Technology, or similar related discipline
10+ years of relevant engineering experience. Relevant advanced degrees will be considered in lieu of equivalent experience.
Demonstrated experience designing, analyzing, integrating, and testing engines for space vehicles.
Demonstrated experience in developing human rated systems.
Working knowledge of throttleable high thrust hypergolic engines.
Knowledge of environmental testing, such as vibration, shock, acoustic, and/or vacuum.
Experience working with external customers such as commercial companies and government agencies (NASA, AFRL, DARPA, etc.) and component suppliers.
Due to federal regulations (e.g., ITAR/EAR), applicants must be U.S. citizens or lawful permanent residents (e.g., current Green Card holders).
Location: Houston, TX.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
To support this ambitious goal, we are seeking a Senior Test Application HW/SW Developer to join our Electrical Functional Test Team in Munich. You will be responsible for the design, implementation, and integration of automated test software applications used to validate electronics at various levels — from individual boards to full subsystems — across our verification and validation campaigns.
You will play a key role in shaping the test automation framework used on our Hardware-in-the-Loop (HiL) platforms, working in close collaboration with electrical, avionics, and system engineers.
In your role as Senior Test Application HW/SW Developer , you will:
Design, develop, and maintain test automation software for board-level, equipment-level, and subsystem-level testing
Define and implement hardware and software architectures tailored to specific test scenarios and HiL environments
Develop LabVIEW-based applications, for both desktop and real-time platforms (e.g., PXI, cRIO)
Integrate and configure NI VeriStand as part of real-time test setups
Collaborate with cross-functional teams to ensure seamless integration of hardware and software into functional test platforms
Support test execution, data acquisition, logging, and automated reporting
Create and maintain technical documentation, including architecture specifications, code documentation, and user guides
Provide support for debugging, troubleshooting, and continuous improvement of test platforms
Developing a robust and scalable test software framework supporting reuse and modularity across projects
Implementing real-time data handling and I/O configuration through NI hardware and LabVIEW RT
Defining test automation workflows using NI TestStand and integrating them into the system test process
Coordinating closely with electrical and system engineers to ensure requirements traceability and test coverage
Contributing to the continuous evolution of our HiL infrastructure, with an emphasis on performance, reliability, and maintainability
Ensuring all solutions meet space-grade quality and safety standards, aligned with project requirements
Bachelor’s or Master’s degree in Electrical Engineering, Computer Science, or a related field
Proficiency in LabVIEW, including desktop and real-time application development
Hands-on experience with NI VeriStand in real-time test environments
Familiarity with NI TestStand for test automation and execution management
Solid understanding of test platform architectures, hardware/software integration, and real-time systems
Strong debugging and troubleshooting skills, with a structured and methodical approach
Experience working with LabVIEW FPGA is appreciated
Ability to write and integrate Python scripts to extend test workflows or support automation tasks
Fluent in English, with excellent written and verbal communication skills
Proven ability to collaborate across disciplines, drive initiatives, and deliver in a high-paced environment
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
To support this ambitious goal, we are seeking an Electrical Test Technician to join our Electrical Integration & Test Team in Munich. You will be responsible for the assembly, integration, maintenance, and modification of electrical test systems used throughout the development, verification, and validation of spacecraft subsystems and avionics equipment.
You will play a key role in building and maintaining custom test racks, integrating commercial off-the-shelf (COTS) and custom-designed hardware, and supporting engineers during test campaigns. Working closely with electrical, avionics, and system engineers, you will help ensure our test infrastructure meets the highest standards of quality, reliability, and safety.
In your role as Electrical Test Technician, you will:
Assemble, wire, and integrate electrical test racks and ground support equipment
Perform wiring and interconnections between COTS equipment and custom-designed hardware
Manufacture, route, label, and install electrical harnesses and cables according to engineering documentation
Interpret electrical schematics, wiring diagrams, and technical drawings to perform integration and troubleshooting activities
Support electrical integration, verification, and test campaigns across multiple projects
Perform inspections, modifications, and repairs on electrical assemblies and test equipment
Assist in the installation, replacement, and rework of electronic components on PCBs when required
Execute continuity, insulation, and basic electrical verification tests on assemblies and harnesses
Maintain accurate documentation of wiring modifications, test setups, and configuration changes
Support troubleshooting and root-cause investigations on electrical and test systems
Building and maintaining reliable electrical test infrastructures for spacecraft development and qualification activities
Integrating a wide variety of electrical equipment, including power supplies, measurement devices, automation components, and custom electronics
Ensuring all rack assemblies and wiring installations comply with internal standards and safety requirements
Supporting engineers during test setup preparation, execution, and troubleshooting activities
Contributing to the continuous improvement of test equipment, assembly processes, and documentation practices
Maintaining high levels of workmanship, quality, and configuration control across all electrical integration activities
Ensuring electrical installations are safe, maintainable, and suitable for demanding aerospace test environments
Technical diploma, vocational qualification, or equivalent experience in Electrical Engineering, Electronics, Mechatronics, Industrial Automation, or a related field
Proven hands-on experience in electrical assembly, wiring, and integration activities
Ability to read, interpret, and work from electrical schematics, wiring diagrams, and technical documentation
Experience assembling and wiring electrical cabinets, racks, or industrial control systems
Knowledge of cable and wire selection principles, including preliminary conductor sizing based on electrical loads and installation constraints
Familiarity with common industrial automation components such as relays, contactors, circuit breakers, terminal blocks, sensors, power supplies, and I/O modules
Experience using standard electrical test equipment, including multimeters, oscilloscopes, power supplies, and continuity testers
Strong troubleshooting skills and a structured, methodical approach to problem-solving
High attention to detail and commitment to quality workmanship
Fluent in English, with excellent written and verbal communication skills
Ability to collaborate effectively with multidisciplinary engineering teams in a fast-paced environment
Experience with aerospace, automotive, railway, or other highly regulated industries
Experience performing PCB assembly, component replacement, soldering, and electronic rework
Familiarity with low-voltage DC power distribution systems
Knowledge of cable harness manufacturing and connector assembly standards
Experience working with custom-built test equipment and Hardware-in-the-Loop (HiL) environments
Ability to design rack front panels and front-end layouts for custom test systems
Familiarity with CAD tools for electrical or mechanical design documentation
Understanding of configuration management and documentation control processes
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
The Exploration Company is looking for a Advanced Machining Team Leader to lead and structure our machining workshop in Bordeaux.
You will be responsible for the daily management, performance and development of a hands-on CNC team composed of machinists and programmers. The workshop manufactures complex aerospace parts using 3-axis and 5-axis milling, CNC turning, mill-turn and grinding equipment.
Your mission will be to make the workshop run efficiently every day: ensuring priorities are clear, machines are available, blockers are removed, anomalies are managed, and parts are delivered safely, on time and at the required quality level.
You will report to the Lead Advanced Manufacturing.
Lead a CNC workshop team of around 6 people, with additional temporary resources depending on workload.
Organize daily priorities, workload, machine allocation and production follow-up.
Drive shop-floor routines to review progress, blockers, anomalies, safety, quality and delivery risks.
Manage team performance, skills development, training, onboarding and individual follow-up.
Support and challenge CNC programming, machining strategies, setups, tooling and workholding.
Ensure strong execution on 3-axis milling, 5-axis milling, CNC turning, mill-turn and grinding activities.
Improve workshop performance: machine utilization, setup time, cycle time, first-time-right, rework and delivery adherence.
Coordinate with Manufacturing Engineering, Quality, Metrology, Supply Chain and Design Engineering.
Manage workshop readiness, first-level maintenance, preventive maintenance follow-up and machine availability.
Ensure compliance with AS/EN 9100 standards, including production control, traceability, documentation and non-conformity management.
Drive continuous improvement actions on safety, quality, cost, delivery and team development.
We are looking for a hands-on leader with strong CNC machining experience and real shop-floor credibility.
You may be:
A senior CNC technician, machinist, setter or programmer who has grown into team leadership or workshop management.
A senior workshop leader with a strong machining background.
A high-potential manufacturing or industrialization engineer with hands-on experience in CNC programming, machining process development and shop-floor support.
You have:
Strong experience in CNC machining, including 3-axis milling, 5-axis milling, CNC turning and/or mill-turn operations.
Good understanding of CAM programming, cutting tools, workholding, setups and machining strategy.
Experience with complex metallic parts, especially aluminium, stainless steel, Inconel or similar aerospace materials.
Experience in aerospace, space, defense, motorsport, energy, medical or another high-precision industry.
Proven ability to lead a technical production team and manage daily shop-floor priorities.
Good knowledge of quality systems, traceability and manufacturing documentation.
Knowledge of AS/EN 9100, ISO 9001 or equivalent quality standards.
Strong problem-solving skills and a pragmatic, structured leadership style.
Professional level in French and English.
Previous experience with HyperMill, Haas, HG Grimme, Mazak, DMG MORI or Studer equipment would be highly valuable.
Experience in 5-axis machining, mill-turn machining, precision grinding, workshop performance management, visual management, ERP/MES tools such as Odoo, or AS/EN 9100 audits would also help you succeed in this role.
Lead and structure a strategic CNC workshop for a European space company.
Work on critical parts for a reusable orbital spacecraft.
Join a growing manufacturing team with advanced machining capabilities.
Have a direct impact on workshop performance, industrial maturity and team development.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
Our Future Projects unit is dedicated to expanding and complementing these capabilities by conceptualizing and pre-developing new technologies, products and programs.
As a Test Site Manager, you will handle a variety of administrative tasks to support our operations and ensure the smooth running of our test site in the UAE. The ideal candidate will be proactive, detail-oriented, and able to manage multiple tasks efficiently.
In your capacity as Test Site Manager, your role will be continuously evolving, but day to day your duties will include:
Supporting the selection of suitable facilities for the test site
Supporting the preparation of the required documentation for the commissioning and running of the facilities
Supporting development and AIT teams on operations-related tasks (training, cleaning services, etc.)
Ensuring that the facilities are compliant with safety and security regulations
Supporting procurement for basic needs (consumables, daily needs, PREQs...) and test site operations
Coordinating/ensuring the on-time maintenance of the Assembly and test facilities in UAE
Coordinating/ensuring the security and restricted access to test facilities in UAE
Performing other administrative tasks as needed to support the teams
Handling incoming and outgoing correspondence, including emails and phone calls
Supporting in the handling of incoming and outgoing packages delivery
Define, implement, handle and guaranty safety procedures and application according to regulations and standards
In the role of Test Site Manager ideally, you will have the following:
High school diploma or equivalent; any other higher education degree will be appreciated
5+ years of experience managing facilities for engineering companies, preferably in the aerospace sector
Knowledge about UAE regulations, with a focus on safety
Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook)
Excellent organizational and multitasking skills
Strong written and verbal communication skills
Ability to work independently and as part of a team
Attention to detail and problem-solving skills
Passion for advancing the commercial space industry
Highly motivated to work in a fast paced, autonomously driven, and demanding start-up environment
Fluent in English. Arabic is an asset
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are looking for a Principal TPS Engineer to lead the definition, development, and delivery of the Thermal Protection System (TPS) for Nyx. This role combines deep technical ownership with subsystem leadership, ensuring robust, traceable, and flight-ready TPS solutions aligned with overall spacecraft needs.
Own the TPS architecture and design, ensuring consistency with system-level constraints and interfaces (structures, avionics, propulsion, etc.).
Lead trade-offs and technical decisions, balancing performance, reliability, manufacturability, cost, and schedule.
Drive modelling and analysis activities, ensuring high-quality predictions, assumptions traceability, and correlation with test results.
Define and oversee TPS hardware development and qualification, including supplier interaction and flight model delivery.
Establish and execute verification and test strategies, from component level to integrated system validation.
Manage technical risks, reviews, and progress tracking, ensuring timely escalation and mitigation actions.
Lead and mentor the TPS engineering unit, defining priorities, supporting growth, and ensuring delivery excellence.
Act as a hands-on technical leader, actively contributing to design, analysis, test preparation and troubleshooting, with strong proximity to integration and MAIT activities.
Own and structure the TPS laboratory environment, ensuring the right capabilities, workflows, and test practices are in place to support development, qualification, and iteration speed.
Degree in Aerospace Engineering or a related field.
At least 5 years of experience in the development of space or defense thermal protection systems, including design, analysis, and validation.
Strong background in material response analysis, testing, and correlation methodologies.
Proven experience leading space hardware development and qualification.
Strong understanding of thermodynamics, heat transfer, and fluid mechanics principles.
Experience in aerodynamic and aerothermal analysis is strongly appreciated.
Familiarity with space industry standards.
Fluent in English. German, French or Italian are an asset.
Ability to translate complex technical challenges into clear decisions and actionable plans.
Strong leadership and mentoring skills within engineering teams.
Excellent collaboration across multidisciplinary teams and external partners.
Clear and effective communication with technical and program stakeholders.
Strong problem-solving skills and attention to detail.
Strong organizing and prioritization of tasks.
Positive and flexible attitude to get the job done.
Demonstrates behaviours consistent with The Exploration Company’s core values of Vision, Competence, Integrity and Passion.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are seeking an experienced AIT Thermal/ECLSS Team Leader to lead our dynamic AIT thermal/ECLSS team.
In this role, you will be responsible for the planning and execution of thermal/ECLSS integration and testing for Nyx Earth, starting from sub-system level thermal and ECLSS test campaigns. You are requested to lead a small team.
This is a unique opportunity to play a hands-on role in testing and qualifying critical space systems in a fast-paced, innovation-driven environment.
You will report to the AIT Mechanical Principal Engineer.
Integration & Test Planning:
Design and plan thermal EVT (environment test) campaign at system/capsule level.
Design and plan all thermal/ECLSS activities at sub-system levels (cold plate qualification, Pressure Compartment System, Ventilation system, etc..) for system and sub-system level.
Support the preparation of engineering drawings for manufacture of test bench components.
Lead team and activities to have a succesful integration of the Thermal system in the Capsule.
Hardware Management:
Define and manage flight hardware interfaces during integration (pipes, fittings, valves, MLI, heaters, sensors, harness routing, thermal fillers, etc.).
Design the 3D setup of test activities and build test setup.
Procure test parts and write/execute procedures for all test activities.
Test Execution:
Plan, define, prepare, execute, and oversee thermal/ECLSS tests in coordination with internal and external test facilities.
Data Analysis & Reporting:
Provide test results and generate comprehensive test reports.
Support in correlate and validate models in collaboration with engineering team.
Cross-functional Collaboration:
Work closely with the design office and systems engineering to ensure design meets flight qualification standards.
Improve the processes and procedure with the lessons learned of the previous operations.
Support the team in other factory setup as we are a growing company, the perimeter can evolve along the mission.
Compliance & Safety:
Ensure all testing activities comply with spaceflight standards and internal quality/safety protocols.
A minimum of a MSc degree in Aerospace Engineering, Mechanical Engineering, Thermal Physics, or related field.
Over 5 years of relevant experience in testing or integration in the aerospace sector.
Strong understanding of spacecraft thermal control systems, ECLSS systems, and test methodologies.
Hands-on experience with TVAC chambers, thermal cycling equipment, sensor systems and test bench setup, including pipe bending.
Familiarity with instrumentation (thermocouples, RTDs, thermal blankets, heaters, pressure sensors, actuators, etc.).
Experience in writing and executing test procedures and managing test campaigns.
Experience with CAD software preferably with Siemens NX
Experience in managing a small team.
Excellent problem-solving skills, autonomy, and attention to detail.
Fluency in English.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
At The Exploration Company, we are developing next-generation space transportation systems, including a lunar lander capable of precision landing and reusable operations. To support this effort, we are establishing a dedicated remote test site in the United Arab Emirates to perform hot-fire propulsion testing and hopper flight demonstrations.
As a Lunar Lander Test Bench Development Engineer, you will lead the design, development, and deployment of this new test facility from concept to operations. The role combines propulsion test infrastructure design, cryogenic fluid systems engineering, civil infrastructure coordination, and end-to-end project execution in a remote environment.
This position requires periodic travel to the UAE during site development, commissioning, and operations phases.
In this role, your responsibilities will evolve with project maturity. Day-to-day duties will include:
Test Site Development
Define and synthesize system-level requirements for a remote lunar lander test site supporting hot firing and hopper flight testing.
Lead the design and implementation of the complete facility, including ground infrastructure and utilities.
Specify and implement propellant and pressurization systems including Liquid Oxygen, Liquid Methane, Helium, and Nitrogen.
Design infrastructure enabling autonomous operation of a remote site (power generation, storage, logistics, safety systems).
Fluid and Cryogenic Systems Engineering
Develop P&IDs for propulsion test facilities and associated ground support equipment.
Design, size, and select components for cryogenic and high-pressure fluid systems.
Ensure safe handling, storage, and distribution of cryogenic propellants and pressurants.
Infrastructure and Civil Engineering Coordination
Define facility layout, foundations, structural interfaces, and site infrastructure requirements.
Coordinate with civil engineering partners to implement test stands, safety perimeters, and support buildings.
Safety, Automation, and Operations
Define and implement automation architectures for test operations and facility control, including safe connections with the vehicle to test.
Develop and validate safety-critical systems protecting personnel, hardware, and environment.
Perform hazard analyses (FMEA, HAZOP, risk assessments) and implement mitigation measures.
Develop test procedures, operational concepts, and commissioning plans.
Project Leadership
Lead end-to-end development of the test facility including design, procurement, manufacturing, installation, commissioning, and operations readiness.
Manage technical interfaces with internal teams, customers, and external suppliers.
Perform trade-off analyses to optimize performance, safety, cost, and schedule.
Support on-site deployment, integration, and test campaigns.
Degree in aerospace engineering, mechanical engineering, energy systems, or a related field.
5+ years of experience in propulsion test facilities or hot-fire test bench development.
Strong expertise in fluid systems engineering, including cryogenic propellants.
Experience designing or operating ground support equipment for rocket propulsion systems.
Knowledge of automation systems and safety-critical control architectures for industrial or test environments.
Experience coordinating infrastructure or facility development in industrial or remote environments.
Demonstrated project management capability across multidisciplinary engineering activities.
Hands-on engineering mindset with strong problem-solving ability.
Excellent communication skills and ability to work across international teams.
Willingness to travel to and work periodically in the United Arab Emirates.
Location: Bordeaux (France) in a first step and test campaign of few months in UAE.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
You will own the functional architecture and performance of the propellant feed system for a storable bipropellant propulsion system (MON3-MMH system). You will be responsible for ensuring the feed system delivers propellants to the thrusters within required specifications across the full mission envelope — from ground fill through operation, and recovery.
System Architecture
Define and maintain the functional architecture of the feed system including propellant tanks, lines, valves, filters, thrusters and instrumentation.
Perform system-level sizing, sensitivity analyses and functional simulations
System Development
Define functional requirements for subsystems based on propellant system analyses
Identify key verification and validation steps required at the system and subsystem level to demonstrate compliance with specification
Modeling & Analysis
Develop and maintain fluid system models (steady-state and transient) to predict pressure drop, flow rates, water hammer, thruster cross-coupling, and priming behavior.
Verify compliance between system nominal and off-nominal operation with subsystem operational domains (such as thruster envelope).
Analyze failure modes (leakage, contamination, cavitation, fluid hammer) and define mitigation strategies and design margins.
Verification & Test
Lead functional and performance verification: cold-flow, functional and hot-fire tests from component to assembly level .
Correlate test data against predictive models and update margins/requirements accordingly.
Integration Support
Support integration, qualification, and operations reviews (design reviews, FMEA, test readiness reviews).
Interface across design, test, and operations functions throughout the vehicle lifecycle.
You will perform your duties principally at the Company's premises in Bordeaux and may be required to travel from time to time to our company’s premises in Munich in the course of your duties.
Master’s and/or PhD degree in Aerospace Engineering or a related field
Proven experience with python and 0D - 1D fluid simulation tools (model development and analyses) - (e.g., EcosimPro or equivalent)
Hands-on experience in propulsion system design for launch vehicles, spacecraft, or space capsules, with direct exposure to liquid propulsion architectures.
Proven experience in version control systems and tools (e.g., Git or SVN)
Deep understanding of fluid mechanics, heat transfer, and compressible flow
Experience with storable propulsion system is a plus
Fluency in English
German or French are an asset
Skills and Behaviours:
A hands-on approach to problem-solving, combined with a collaborative mindset to work across multidisciplinary teams
Excellent organizational skills and ability to multitask
Capability of working autonomously whilst collaborating productively with remote teams
Positive and flexible attitude in a constantly evolving environment
Grit to get the job done
Ability to communicate effectively with a wide variety of audiences
Behaviors consistent with The Exploration Company’s core values of Commitment, Innovation, Trust, Quality, and Teamwork
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are seeking a highly motivated and experienced Software System Engineer to support the certification activities of the flight software for the Nyx program. You will work in a dedicated team focused on verification & validation (V&V), software certification, requirements tracing, test planning and system engineering interfacing. In this role, you will collaborate closely with software development teams, system engineering, certification bodies, and safety authorities. You will work in a fast-paced, collaborative environment where cross-functional integration is essential.
Key Responsibilities
Contribute to V&V and IV&V activities to ensure that flight software meets functional, performance, and safety requirements
Support requirements management and tracing, ensuring full traceability from system-level requirements to software implementation, test and verification artifacts
Prepare and review documentation required for software certification and NASA Safety Reviews
Interpret, tailor, and apply formal standards
Interface with internal Product Assurance
Collaborate daily with system engineers and software development teams to resolve technical issues and clarify requirements
Develop and maintain software functional design baseline
Plan software testing of the integrated mission
Use your understanding of C++ and Python to meaningfully engage in software design and test discussions
What we would love to see from you
Experience working on safety-critical or highly regulated software systems (preferably in aerospace)
Solid understanding of requirements management, V&V, test and certification processes
Strong technical background in software engineering, with practical experience in flight software frameworks and modern C++
Experience with real-time systems, embedded development, or spacecraft software
Familiarity with software testing methodologies and simulation tools
Excellent cross-disciplinary communication and collaboration skills
Focus on detail, quality, and testing
Familiarity with agile and modern development practices
Nice to have
Familiarity with standards such as SSP 50808, NASA-NPR-7150.2, NASA-STD-8739.8B, RCC319, ECSS-Q-ST-80C
Prior work on human-rated spaceflight programs
Experience with model-based system engineering
Experience with CI/CD systems and build systems
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
The System Integration Senior Engineer will help lead the Nyx system end‑to‑end integration and verification, with a focus on functional platforms (Software in the Loop Platform, Processor in the Loop Platform, Hardware in the Loop Platform, Functional Simulation Facility). You will define and execute test plans, manage requirement traceability, analyse test results, and close verification evidence across SIL/PIL/HIL and physical test campaigns. Working closely with subsystem leads, AIT teams, and external partners, you will identify integration risks, resolve anomalies, and ensure that all mechanical functions perform safely and reliably throughout the mission profile. This position requires a rigorous systems mindset, strong understanding of mechanical behaviour in the space environment, and the ability to lead multidisciplinary verification activities to successful closure.
Key Responsibilities
In your capacity a System Integration Senior Engineer, your role will continuously evolve, but initially your day-to-day duties will include:
Ensure the definition and implementation of the Nyx Earth system integration and verification activities, which meets technical and programmatic requirements and considers the adequacy of model philosophy, facilities availability, planning and costing.
Define plans and specifications with clear Success Criteria and support the generation of test procedures with the Functional Platform team.
Drive the technical discussions, preparation, organization and execution of the system verification campaigns, to ensure the closure of all system verification aspects, including nominal and off nominal spacecraft behaviors.
Organise the different reviews for incremental progress and ultimate closure of verification events.
Generate reports and drive the closure of the Items for Verification and Validation covered by the campaign.
Collaborate with all Functional Chain responsible and engineering disciplines to prepare and perform the system activities.
Process the anomalies occurring during the verification campaign in coordination with the Product Assurance Team and the rest of the Engineering Team.
What we would love to see from you
In the role of System Integration Senior Engineer ideally, you will have the following:
Master’s degree in Aerospace Engineering, or another related field.
5 to 10 years of experience in systems design, analysis, and testing of aerospace or space-related systems, with a focus on integration of complex spacecraft and/or testing activities.
Hands-on hardware experience.
Practical experience / contact with functional test platforms, such as software in the loop, hardware in the loop, and bench testing.
Experience in the development and verification of space hardware.
Spacecraft systems knowledge.
Skills and Behaviours
Strong oral and written communication skills
Strong analysis and problem-solving skills
Strong organizing and prioritization of tasks
Positive and flexible attitude to get the job done
Ability to communicate at all levels of the business
Demonstrates behaviors consistent with The Exploration Company’s core values of Mission, Vision, Integrity, Excellence and Teamwork
Space enthusiast: ready to change the European space industry
Ability to thrive in a high paced development environment
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are seeking a highly motivated and experienced Software System Engineer to support the certification activities of the flight software for the Nyx program. You will work in a dedicated team focused on verification & validation (V&V), software certification, requirements tracing, test planning and system engineering interfacing. In this role, you will collaborate closely with software development teams, system engineering, certification bodies, and safety authorities. You will work in a fast-paced, collaborative environment where cross-functional integration is essential.
Key Responsibilities
Contribute to V&V and IV&V activities to ensure that flight software meets functional, performance, and safety requirements
Support requirements management and tracing, ensuring full traceability from system-level requirements to software implementation, test and verification artifacts
Prepare and review documentation required for software certification and NASA Safety Reviews
Interpret, tailor, and apply formal standards
Interface with internal Product Assurance
Collaborate daily with system engineers and software development teams to resolve technical issues and clarify requirements
Develop and maintain software functional design baseline
Plan software testing of the integrated mission
Use your understanding of C++ and Python to meaningfully engage in software design and test discussions
What we would love to see from you
Experience working on safety-critical or highly regulated software systems (preferably in aerospace)
Solid understanding of requirements management, V&V, test and certification processes
Strong technical background in software engineering, with practical experience in flight software frameworks and modern C++
Experience with real-time systems, embedded development, or spacecraft software
Familiarity with software testing methodologies and simulation tools
Excellent cross-disciplinary communication and collaboration skills
Focus on detail, quality, and testing
Familiarity with agile and modern development practices
Nice to have
Familiarity with standards such as SSP 50808, NASA-NPR-7150.2, NASA-STD-8739.8B, RCC319, ECSS-Q-ST-80C
Prior work on human-rated spaceflight programs
Experience with model-based system engineering
Experience with CI/CD systems and build systems
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We want you as a talented System Integration Senior Engineer to help us lead the system end‑to‑end integration and verification of functional and environmental elements within the Nyx spacecraft, ensuring full compliance with system‑level requirements and standards. In this role, you will coordinate the integration of mechanisms, structural assemblies, deployment systems, and mechanical‑to‑avionics interfaces, driving the verification logic from early functional modelling through environmental qualification and final acceptance. You will define and execute plans, manage requirement traceability, analyse results, and close verification evidence campaigns. Working closely with subsystem leads, AIT teams, and external partners, you will identify integration risks, resolve anomalies, and ensure that all mechanical functions perform safely and reliably throughout the mission profile. This position requires a rigorous systems mindset, strong understanding of mechanical behaviour in the space environment, and the ability to lead multidisciplinary verification activities to successful closure.
Key Responsibilities
In your capacity a System Integration Senior Engineer, your role will continuously evolve, but initially your day-to-day duties will include:
Ensure the definition and implementation of the Nyx Earth system integration and verification activities, which meets technical and programmatic requirements and considers the adequacy of model philosophy, facilities availability, planning and costing.
Define plans and specifications with clear Success Criteria and support the generation of test procedures with the functional team.
Drive the technical discussions, preparation, organization and execution of the system verification campaigns, to ensure the closure of all system verification aspects, including nominal and off nominal spacecraft behaviors.
Organise the different reviews for incremental progress and ultimate closure of verification events.
Generate reports and drive the closure of the Items for Verification and Validation covered by the campaign.
Collaborate with all Functional Chain responsible and engineering disciplines to prepare and perform the system activities.
Process the anomalies occurring during the verification campaign in coordination with the Product Assurance Team and the rest of the Engineering Team.
What we would love to see from you
In the role of System Integration Senior Engineer ideally, you will have the following:
Master’s degree in Aerospace Engineering, or another related field.
5 to 10 years of experience in systems design, analysis, and testing of aerospace or space-related systems, with a focus on integration of complex spacecraft and/or testing activities.
Hands-on hardware experience.
Practical experience / contact with functional test platforms, such as software in the loop, hardware in the loop, and bench testing.
Experience in the development and verification of space hardware.
Spacecraft systems knowledge.
Skills and Behaviours
Strong oral and written communication skills
Strong analysis and problem-solving skills
Strong organizing and prioritization of tasks
Positive and flexible attitude to get the job done
Ability to communicate at all levels of the business
Demonstrates behaviors consistent with The Exploration Company’s core values of Mission, Vision, Integrity, Excellence and Teamwork
Space enthusiast: ready to change the European space industry
Ability to thrive in a high paced development environment
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We want you as a talented Avionics Equipment Technical Owner to help us in our mission by designing, testing, and optimizing avionics equipment, ensuring compliance with mission loads and safety requirements.
You will be successful in this role if you are able to help us:
Coordinate the internal design and development of avionics equipment in collaboration with our electronics, mechanical design, thermal and digital engineers
Perform functional validation and qualification of avionics equipment
Move units from first prototypes to Engineering Models, Qualification Models and Flight Models
Flow down and validate requirements to unit level
In your capacity as an Avionics Equipment Technical Owner, your role will be continuously evolving, but day to day your duties will include:
Point of contact and full responsible for one avionics unit
Owner of the equipment from concept and breadboard phase to flight model
Owner of unit documentation, ICDs and requirements
Owner of box level FDIR and FMEA
Coordination of all disciplines working on a unit (electronics design engineers, mechanical design engineers, system engineers, test team, EGSE team)
Coordination and run of test campaigns (EM, QM, FM) covering functional and environmental tests (vibe, shock, TVAC, EMC) with the environmental load specialists
Analysis of test data after test campaigns
Definition of roadmap for unit improvement (between models and between flights)
Closely working with functional chains (thermal, ECLSS, Propulsion, etc.) to plan system level tests with the units embedded
Continuous Learning: Stay current with industry trends, emerging technologies, and advancements in avionics design
In the role of Avionics Equipment Technical Owner ideally, you will have the following:
Bachelor's or Master's degree in Electrical Engineering, Aerospace Engineering, or a related field
Hands-on experience in avionics equipment design, with a focus on aerospace applications or a related field
Proficiency in avionics design tools and software
Understanding of space relevant standards (like ECSS, MIL-STD, NASA-HBK) and regulations
Knowledge of safety-critical design principles
Familiarity with Reliability, Availability, Maintainability & Safety (RAMS) aspects : Failure Mode, Effects & Criticality Analysis (FMECA), Fault/Failure Detection, Isolation, and Recovery (FDIR), etc…
Familiarity with environmental and reliability considerations in avionics design
Excellent problem-solving and analytical skills
Strong verbal and written communication skills. Ability to collaborate effectively with multidisciplinary teams
Meticulous attention to detail in design, analysis, and documentation
Hands on mentality at testing and problem debugging in laboratory
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
As a talented Propulsion CFD Engineer, you will be responsible for the computational fluid dynamics analysis of propulsion system components and thruster plumes, providing the flow physics insight that underpins component design, thruster performance, and vehicle-level integration decisions.
CFD Analysis & Component Simulation
Perform CFD simulations of propulsion components — valves, regulators, orifices, injectors, feed lines — to characterize internal flow, pressure drop, and flow-induced loads.
Support design trade studies by predicting component-level performance across the operating envelope, in both steady-state and transient conditions.
Identify and help resolve flow anomalies such as cavitation, choking, or flow separation that affect component performance.
Plume Characterization & Thruster Performance
Model thruster plume characterization, from near-field continuum expansion through far-field rarefied flow, including relevant gas dynamics effects.
Assess plume-induced thermal, contamination, and force/torque effects on adjacent subsystems and vehicle surfaces.
Support thruster and nozzle design by predicting performance parameters such as thrust coefficient and specific impulse from CFD.
Cross-Functional Design Collaboration
Work closely with propulsion design engineers and structural and thermal analysts to translate CFD results into actionable design inputs and margins.
Communicate CFD findings and their implications clearly to multidisciplinary teams and program stakeholders.
Support system-level trades on component sizing, thruster placement, and plume shielding for vehicle interfaces.
Model Validation, Tools & Documentation
Validate and correlate CFD models against test data — cold-flow testing, hot-fire testing, plume diagnostics — to build and maintain model confidence.
Maintain and improve CFD simulation workflows, meshing practices, and tools to improve turnaround time and consistency across the design office.
Produce clear technical reports and analysis documentation supporting design reviews and certification.
You will perform your duties principally at the Company's premises in Bordeaux and may be required to travel from time to time to our company’s premises in Munich in the course of your duties.
M.S. or Ph.D. in aerospace or a related field, with 3+ years of hands-on CFD experience relevant to propulsion or fluid dynamics.
Proficiency with CFD software such as ANSYS Fluent, STAR-CCM+, OpenFOAM, or equivalent.
Experience modeling compressible, multiphase, and/or rarefied gas flows relevant to propulsion valves and thruster plumes.
Familiarity with plume characterization methods such as DSMC or continuum-rarefied coupling is a strong plus.
Strong grounding in fluid mechanics, thermodynamics, and gas dynamics fundamentals.
Experience correlating CFD predictions against test data.
Familiarity with scripting or automation (Python, MATLAB) for meshing, post-processing, or workflow automation.
Fluent in English. German and French are an asset
Skills and Behaviors:
A hands-on approach to problem-solving, combined with a collaborative mindset to work across multidisciplinary teams
Excellent organizational skills and ability to multitask
Capability of working autonomously whilst collaborating productively with remote teams
Positive and flexible attitude in a constantly evolving environment
Grit to get the job done
Ability to communicate effectively with a wide variety of audiences
Behaviors consistent with The Exploration Company’s core values of Commitment, Innovation, Trust, Quality, and Teamwork
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
As a talented Propulsion CAD Engineer, you will be responsible for the detailed 3D modeling, drawing production, and documentation of propulsion system components and subsystems, working closely with design, thermal, structural, and manufacturing teams to turn requirements into buildable, well-controlled hardware.
CAD Modeling & Design Development
Create complex 3D models of propulsion components and subsystems using CAD software (Siemens NX).
Produce schematics and technical drawings that other engineers and technicians can follow, and present designs clearly, explaining complex aspects in simple terms when needed.
Support estimation of component mass, cost and lead time from CAD models and drawings.
Documentation & Configuration Control
Create and maintain the documentation essential for manufacturing or assembly, including bills of materials (BOM), assembly instructions, and technical reports.
Ensure configuration management and version control of CAD models and drawings, keeping the master model and released drawing set consistent and traceable.
Develop new tools and workflows to improve CAD, documentation, and configuration management processes across the design office.
Cross-Functional Design Collaboration
Collaborate closely with designers, thermal and structural analysts, and materials and manufacturing engineers to refine designs.
Incorporate multidisciplinary feedback to improve functionality, manufacturability, and efficiency without compromising design intent.
Support design iterations quickly and accurately so analysis and manufacturing teams can work from a stable, up-to-date model.
Standards Compliance & Design Verification
Verify that designs comply with industry standards, safety regulations, and company policies (e.g., ISO standards, ANSI, or other relevant guidelines).
Apply Geometric Dimensioning and Tolerancing (GD&T) correctly to ensure drawings communicate functional intent, not just geometry.
Check designs for manufacturability, inspectability, and compliance before release, catching errors and inconsistencies before they reach the shop floor.
You will perform your duties principally at the Company's premises in Bordeaux and may be required to travel from time to time to our company’s premises in Munich in the course of your duties.
Minimum of a B.S. degree in engineering and 3+ years of related experience.
Proficiency in CAD software such as Siemens NX or similar.
Proficiency in Geometric Dimensioning and Tolerancing (GD&T).
Experience on tubing and brackets design constraints, manufacturing processes and inspection is a plus
Attention to detail and ability to spot errors or inconsistencies in drawings and designs.
Strong understanding of engineering standards, manufacturing processes, and analysis principles.
Fundamental knowledge of structural design, stability, and fatigue failure mechanisms..
Fluent in English. German and French are an asset.
Skills and Behaviors:
A hands-on approach to problem-solving, combined with a collaborative mindset to work across multidisciplinary teams
Excellent organizational skills and ability to multitask
Capability of working autonomously whilst collaborating productively with remote teams
Positive and flexible attitude in a constantly evolving environment
Grit to get the job done
Ability to communicate effectively with a wide variety of audiences
Behaviors consistent with The Exploration Company’s core values of Commitment, Innovation, Trust, Quality, and Teamwork
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
As a talented Propulsion Structural Engineer, you will be responsible for the design, justification, testing and validation of the mechanical structure of the propulsion system and its interfaces with the primary structure.
Structural Analysis & Technical Ownership
Review static and dynamic load inputs, material properties, test data, and component requirements to properly set up structural analysis cases.
Produce stress and fatigue analysis results with detailed validation methodologies and rigorous justification of the propulsion system's structural margins, applying the standards (including fracture control) required for NASA certification.
Assess the integration of of-the-shelf equipment to the propulsion system within the overall system considering their qualified loads
Own the structural substantiation of propulsion components and structures from concept through qualification, ensuring traceability between requirements, analysis, and test.
Design Collaboration & Mechanical Development
Work closely with design engineers to validate mechanical sizing and help them iterate through designs as efficiently as possible.
Design simple mechanical components from scratch and propose creative structural solutions to design engineers, drawing on analysis results and hands-on experience.
Support trade studies on structural architecture, materials, and joint design for propulsion structures and brackets.
Test Campaign Development & Support
Develop and support hardware test campaigns — coupon or sub-assembly testing — to gather analysis inputs or validation data.
Define test objectives and success criteria in coordination with test engineering, and correlate test results back into analysis models.
Identify appropriate test platforms and instrumentation needs for structural verification.
Support non-conformities analyses and resolve process
Anomaly Investigation & Non-Conformance Management
Act as a key contributor to anomaly investigations, performing root cause analyses on structural damage or unexpected test/flight behavior.
Justify non-conformities against structural requirements and support disposition decisions with sound engineering rationale.
Feed lessons learned from anomalies back into design standards and analysis practices.
You will perform your duties principally at the Company's premises in Bordeaux and may be required to travel from time to time to our company’s premises in Munich in the course of your duties.
10+ years of hands-on experience in structural analysis for launch vehicles, spacecraft, or space capsules, ideally with exposure to liquid propulsion structures and systems.
Strong command of FEA tools (NASTRAN or equivalent) complemented by solid hand-calculation skills, for both static and dynamic (vibration, shock, fatigue) load cases.
Familiarity with the standards and processes required for structural certification (e.g. NASA-STD-5001, ECSS, or equivalent), and experience producing analysis reports that hold up under formal review.
Working knowledge of CAD environments (CATIA, NX, or equivalent), sufficient to review, sketch, and propose mechanical design changes.
Experience supporting or running test campaigns, from test definition through correlation of results with predictions.
A track record of contributing to anomaly investigations or non-conformance dispositions in a hardware-delivery environment.
Skills and Behaviors':
A hands-on approach to problem-solving, combined with a collaborative mindset to work across multidisciplinary teams
Excellent organizational skills and ability to multitask
Capability of working autonomously whilst collaborating productively with remote teams
Positive and flexible attitude in a constantly evolving environment
Grit to get the job done
Ability to communicate effectively with a wide variety of audiences
Behaviors consistent with The Exploration Company’s core values of Commitment, Innovation, Trust, Quality, and Teamwork
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
As a talented System Functional Engineer, you will be responsible for maturing the propulsion fluid system's functional design and performance models from preliminary to detailed design, and for driving the architecture trades, verification, and requirements work that keep the system compliant, safe, and traceable.
Mature the overall fluid system from detailed design to qualification by leading the functional analysis of the assembly
Lead your own analysis tasks using advanced simulation tools, and provide outputs to other fluid analysts and functional engineers in selecting appropriate methodologies, assumptions, and data processing methods.
Ensure functional analysis outputs feed directly into design maturity, keeping the fluid system design compliant and traceable as it advances toward detailed design.
System Architecture & Trade Studies
Contribute to the evaluation and optimization of propulsion system concepts in terms of performance, mass, operations, cost, and reliability/safety.
Support development and qualification ground platform designs
Contribute to ground platforms and flight simulations, sensitivity analyses, and risk assessments.
Performance Modeling & Verification & Validation
Develop and maintain functional performance models of propulsive systems using simulation frameworks such as EcosimPro and Python-based codes.
Validate and anchor models against available test data.
Plan and execute the V&V plan for the fluid subsystem, including analysis and test campaigns to verify subsystem performance and requirements compliance.
Failure Analysis, Sequencing & Requirements Management
Contribute to FMEA (Failure Mode and Effects Analysis) to ensure the system architecture is consistent with reliability and safety targets.
Support the Concept of Operations of the Functional Propulsion System in accordance with engine needs and constraints.
Contribute to functional requirements for subsystems such as valves, and tanks based on propulsion system analyses.
You will perform your duties principally at the Company's premises in Bordeaux and may be required to travel from time to time to our company’s premises in Munich in the course of your duties.
Master’s and/or PhD degree in Aerospace Engineering or a related field
Proven experience with 0D - 1D fluid simulation tools (model development and analyses) - (e.g., EcosimPro, Amesim)
Deep understanding of fluid mechanics, heat transfer, and compressible flow
Experience with storable propulsion system is a plus
Fluency in English; proficiency in Italian, German or French are an asset
Skills and Behaviors:
A hands-on approach to problem-solving, combined with a collaborative mindset to work across multidisciplinary teams
Excellent organizational skills and ability to multitask
Capability of working autonomously whilst collaborating productively with remote teams
Positive and flexible attitude in a constantly evolving environment
Grit to get the job done
Ability to communicate effectively with a wide variety of audiences
Behaviors consistent with The Exploration Company’s core values of Commitment, Innovation, Trust, Quality, and Teamwork
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are developing the control application for throttleable rocket engines. The team is responsible for designing, implementing, testing, and validating the closed-loop control and operational logic that allows the engine to operate safely and accurately across its operating envelope.
We are looking for a Control System and Model-Based Design Engineer to support both control algorithm development and application logic implementation. The role is suited for an intermediate engineer, or a strong junior, with good control fundamentals and practical experience developing control functions for real-world systems.
The objective is to help mature the engine control application, from early simulation and control design to MIL/SIL/HIL validation and analysis of real test data.
Design, tune, implement, and validate closed-loop control functions for fluidic systems, such as pressure, flow rate, pump speed, and valve position control.
Develop Simulink functions for control logic, sequencing, state machines, mode management, enable logic, limiters, protections, diagnostics, and actuator command generation.
Build and use control-oriented models, simulations, and test-data replay workflows to support design and validation.
Analyze controller performance, stability, robustness, actuator saturation, sensor limitations, delays, nonlinearities, and operating envelope constraints.
Implement practical control features such as PID, feedforward, filtering, gain scheduling, anti-windup, bumpless transfer, and mode-dependent control logic.
Support MIL, SIL, HIL, and test-data analysis activities to verify the behaviour of the control application before deployment.
Document design choices, assumptions, interfaces, validation results, limitations, and remaining risks.
Work closely with propulsion, embedded software, electronics, test, modelling, and systems engineering teams.
Engineering degree or equivalent experience in control systems, aerospace, electrical, mechanical, automotive, robotics, or a related field.
Practical experience developing functions in MATLAB/Simulink.
Good understanding of feedback control, system dynamics, stability, filtering, and controller tuning.
Experience implementing and testing control or embedded application logic for a real physical system.
Ability to analyze logs, simulation results, and test data to understand system behaviour and improve the design.
Experience with state machines, mode logic, diagnostics, calibration, validation, or production-style Simulink models would be highly appreciated.
Familiarity with state estimation, system identification, optimization or robust control would be a strong plus.
Experience with MIL, SIL, HIL, automatic code generation, or embedded control workflows would be appreciated.
Experience in automotive, aerospace, propulsion, robotics, energy, industrial automation, or another safety-critical dynamic system would be highly relevant.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
At The Exploration Company, we are developing Huracan, a throttleable cryogenic rocket engine designed for lunar landing applications. Huracan brings together a wide range of highly integrated technologies that must operate reliably and with high precision under demanding conditions.
To retain full control over the engine’s performance and technical development, we design its key technologies in-house, including the electric pumps, power electronics, embedded software, and control systems used to operate critical engine functions.
We are seeking a Power Electronics Control Engineer to join the propulsion team developing Huracan. In this role, you will take ownership of the control strategy for the engine’s electrically driven systems, from modelling and simulation through implementation and experimental validation.
We want you to help us achieve reliable and high-performance operation of these critical systems. This hands-on position combines technical leadership, practical problem-solving, multidisciplinary collaboration, and active involvement in laboratory testing.
Key Responsibilities
Lead the definition and development of control architectures and strategies for the electric motors used within our cryogenic propulsion systems, including operating modes, interfaces, and protection functions.
Develop system models and simulations to design and assess control algorithms, system performance, stability, and robustness across the expected operating range.
Translate control concepts into system-level and embedded software requirements, working closely with software and hardware engineers throughout implementation, integration, optimization, and verification.
Plan and perform MIL, SIL, HIL, and laboratory testing; analyze the resulting data, identify performance limitations, and continuously improve the control approach.
Support the commissioning and validation of internally developed power-electronics and electric-drive systems, ensuring their successful integration into the complete engine.
Contribute to technical documentation, design reviews, verification activities, and the continuous improvement of engineering processes.
What we would love to see from you
A BSc or higher degree in electrical engineering, control systems engineering, aerospace engineering, robotics, or a related field.
At least two years of experience developing, validating, or troubleshooting control systems for electric drives, power-electronic systems, or other dynamic systems.
Strong knowledge of control theory, dynamic-system modelling, and simulation, with experience developing control strategies for electric motors and power-electronic systems.
Practical experience with motor-control techniques, including field-oriented control, current, speed and position regulation, modulation, and observer-based control.
Proficiency with modelling and simulation tools such as MATLAB/Simulink/PLECS, together with an understanding of embedded real-time constraints and the implementation of control algorithms in production software.
Experience with laboratory testing, measurement equipment, data analysis, and system debugging, as well as the ability to translate control concepts into clear requirements and collaborate effectively with embedded software engineers.
Experience in aerospace, propulsion, automotive, robotics, energy, industrial automation, or another safety-critical or high-reliability field would be highly relevant.
A proactive, adaptable, and delivery-focused mindset, with a hands-on and practical approach to solving problems in a fast-changing environment.
Strong analytical skills and attention to detail, with a consistent commitment to safety, quality, and reliable execution.
The ability to communicate effectively, both orally and in writing, with colleagues and partners in English. French or German language skills would be advantageous.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are seeking a Storm Deputy Chief Engineer to lead the design, integration, and test of the engine system and turbomachinery for our next-gen high-thrust cryogenic rocket engine (LOX/LCH4). He/she will report to the Storm Chief Engineer and act as their technical deputy, owning engine-level system design and the turbomachinery domain (turbopumps, rotordynamics, bearings and seals, and their integration with the preburner/gas generator) end to end, from architecture through hot-fire testing.
This role is responsible for the technical soundness of the engine system and turbomachinery subsystems, translating the Chief Engineer's overall architecture and vision into detailed design, integration, and validated hardware — while standing in for the Chief Engineer on day-to-day technical arbitration when needed.
The Deputy Chief Engineer owns the technical integrity, performance, and safety of the engine system and turbomachinery throughout their lifecycle — from architecture definition to prototype testing — and works closely with the Storm Chief Engineer and High Thrust Engine Lead to keep engineering excellence and delivery efficiency in balance.
Reports to: Storm Chief Engineer
Engine System Design: Own the detailed design and integration of the engine system, including cycle definition, propellant supply, ignition, and interfaces between turbomachinery, combustion devices, and structures. Ensure design coherence with the overall Storm architecture set by the Chief Engineer.
Turbomachinery Ownership: Serve as the primary technical owner of turbopump design — rotordynamics, bearings, seals, hydraulic and thermal design, and manufacturability — and of its integration with the preburner/gas generator. Lead technical reviews and arbitrate turbomachinery-specific trade-offs.
Test & Validation: Lead engine system and turbomachinery test campaigns, from component-level rig testing through engine hot-fire. Own test planning, instrumentation strategy, data review, and anomaly resolution.
Mentorship and Technical Oversight: Provide guidance and mentorship to the engine systems and turbomachinery teams, fostering a culture of technical rigor, innovation, and accountability.
Risk Management & Safety: Identify, assess, and manage technical risks within the engine system and turbomachinery domains. Support critical design and readiness reviews led by the Chief Engineer, and prepare non-conformance/design deviation packages for approval.
Collaboration: Deputize for the Storm Chief Engineer on technical matters as required, including partner and supplier interactions on turbomachinery and engine systems. Coordinate closely with program management and other engineering domains to balance performance, cost, and schedule.
Continuous Improvement: Drive continuous improvement in engine system and turbomachinery design tools, test methods, and team capability. Ensure lessons learned from testing are captured and fed back into design.
A minimum of a master's degree in propulsion engineering, mechanical engineering, aerospace engineering, or a related field.
Over 10 years of experience in liquid rocket engine development, with significant depth in engine system design and/or turbomachinery.
Deep understanding of cryogenic propulsion systems, including turbopump design, rotordynamics, and hot-gas systems.
Proven track record of taking turbomachinery or engine systems from concept through detailed design and test.
Hands-on experience in engine or turbopump hot-fire/rig testing and anomaly resolution.
Ability to lead multi-disciplinary technical teams and arbitrate design trades within the engine system domain.
Experience managing subsystem-level requirements, interfaces, and verification activities.
Strong analytical and problem-solving skills, with the ability to make sound technical decisions under uncertainty, schedule, and cost pressure.
Ability to work with geographically distributed teams and coordinate with external partners or suppliers.
Fluent in English, with excellent written and verbal communication.
Positive, adaptable, and collaborative mindset.
Please note that applications are only considered from nationals of one of the following States:
Austria, Belgium, Czechia, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Luxembourg, the Netherlands, Norway, Poland, Portugal, Romania, Slovenia, Spain, Sweden, Switzerland, the United Kingdom and Canada, Cyprus, Latvia, Lithuania and Slovakia, Australia, Canada, Iceland, Japan, New Zealand, Norway, Switzerland, including Liechtenstein, the United Kingdom, and the United States.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
As a Thruster Technical Owner, you will own the technical follow-up of the supplier providing assigned Nyx Earth thruster assemblies, including the technical baseline, supplier development path, qualification evidence, delivery readiness, integration support, and flight-operations feedback loop.
You will work closely with propulsion system engineering, GNC, avionics, vehicle design, program management, procurement, quality, PA, supplier quality, AIT/MAIT, test, safety, operations, and the thruster supplier or manufacturing partner. The reporting line is to be confirmed by Propulsion leadership.
Own the assigned thruster technical baseline, including requirements, interfaces, verification methods, performance needs, qualification logic, review data, and acceptance criteria.
Maintain a system-level view of thruster fluidic, mechanical, thermal, electrical, command, GNC, FDIR, safety, operations, and vehicle-design interfaces.
Follow the supplier development path, hot-fire evidence path, qualification logic, acceptance test logic, review sequence, and flight-hardware decision path for the assigned thruster scope.
Build a direct, fact-based technical relationship with the supplier or manufacturing partner while keeping TEC's independent technical judgment clear.
Review supplier deliverables, analyses, drawings where available, procedures, inspection evidence, test results, review packages, and non-conformance inputs.
Make technical maturity, evidence quality, manufacturing readiness, test readiness, schedule risk, delivery risk, and recovery options visible early.
Support AIT/MAIT preparation, integration, test, operations preparation, flight-data review, and treatment of abnormal thruster behaviour.
Strong aerospace, mechanical, propulsion, or related engineering background.
Experience with spacecraft liquid propulsion hardware, ideally bipropellant thrusters, thrust chambers, thruster valves, hot-fire testing, qualification, manufacturing, or acceptance testing.
Proven ability to own technical supplier follow-up for a critical component or unit across requirements, interfaces, qualification, delivery, integration, and anomaly support.
Strong system-engineering judgment across propulsion, GNC, avionics, vehicle design, AIT/MAIT, quality, PA, safety, and operations interfaces.
Ability to communicate clearly with suppliers, engineers, program leadership, procurement, quality, test, and operations stakeholders.
Fluency in English; French and/or German are useful assets.
You know where the thruster stands, what evidence is missing, what is at risk, and what decision is needed.
You judge thruster decisions by spacecraft, mission, safety, integration, cost, and schedule impact.
You stay close to test evidence, hot-fire learning, manufacturing reality, supplier behaviour, and integration constraints.
You escalate early with facts and credible recovery options.
You help nearby engineers and interfaces become stronger through clear technical reasoning.
We are agile: we make decisions fast while keeping our goals and systems in mind.
We are open and collaborative: we are transparent about risks and obstacles so we can solve them together.
We have a lot of fun: we refuel our energy knowing we are democratizing space.
We would love to hear from you if you want to be part of our journey.
The Exploration Company is an equal opportunity employer and values diversity.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are looking for a Principal Mechanical Engineer, to lead the Mechanical Engineering discipline for Nyx Earth, ensuring that mechanical systems are robust, justified, verified, and ready for flight.
As a Principal you will manage a team of Mechanical Engineers, drive structural design and verification activities, and ensure technical excellence across structural analysis, testing, qualification, and verification. You will coordinate your work with the Principal CAD Engineer and with the Vehicle Mechanical Architect, under the guidance of the Mechanical Design Lead. You will play a key role in enabling the successful development of one of Europe's most ambitious space vehicles.
Lead the Mechanical Engineering team, defining priorities, supporting growth, and ensuring engineering excellence and delivery.
Support and collaborate to the mechanical design of the spacecraft and its major assemblies, ensuring structurally efficient, robust, manufacturable, and verifiable design solutions throughout the development lifecycle.
Provide technical leadership on the design of primary and secondary structures, large assemblies, equipment supports, and critical mechanical interfaces, ensuring consistency between design intent, structural justification, and verification strategy.
Own structural justification activities across the spacecraft, ensuring consistency of assumptions, margins, analyses, and engineering evidence.
Coordinate structural analyses and mechanical verification activities, with focus on test strategy and execution, from test definition and prediction to result interpretation and model correlation, ensuring results are coherent, traceable, and aligned with programme objectives.
Ensure verification evidence generated through testing and analysis is robust, review-ready, and suitable for qualification and certification activities towards space agencies.
Drive technical reviews, risk identification, and engineering maturity assessments to ensure readiness for major programme milestones.
Act as a hands-on technical leader, actively contributing to engineering decisions, test campaigns, anomaly investigations, and troubleshooting efforts.
Qualifications:
Degree in Aerospace Engineering, Mechanical Engineering, or a related field.
More than 10 years experience in spacecraft, launch vehicle, aerospace, defence, or other high-performance engineering environments.
Strong background in structure design, structural analysis, justification, qualification, and verification.
Proven experience leading engineering teams and developing technical talent.
Demonstrated experience supporting complex structural test campaigns, from preparation and prediction through execution and data interpretation.
Experience with qualification, certification, and engineering review processes.
Profound knowledge of space industry standards and methodologies.
Fluent in English. German, French, or Italian are an asset.
Skills and Behaviors:
Ability to translate complex engineering challenges into clear decisions and actionable plans.
Strong leadership and mentoring skills within engineering teams.
Excellent collaboration across multidisciplinary teams and external partners.
Strong analytical mindset and engineering judgement.
Clear and effective communication with technical and programme stakeholders.
Strong problem-solving skills and attention to detail.
Strong organisation and prioritisation capabilities.
Positive and pragmatic attitude to get the job done.
Demonstrates behaviors consistent with The Exploration Company’s core values of Vision, Mission, Competence, Integrity and Team Spirit.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
Team Leadership & Engineering Management
Lead, mentor, and grow a team of engineers spanning thermal, structural/mechanical, CFD and CAD/design functions, fostering a culture of technical excellence and accountability.
Define individual scopes of work, set priorities, and manage workload across concurrent design activities to keep the team aligned with program milestones.
Conduct regular design reviews and one-on-ones, providing clear technical direction and supporting career development within the office.
Propulsion System Design & Technical Ownership
Making or approving key design decisions on feed or pressure systems, and associated structures.
Drive design-to-requirements traceability, ensuring system satisfy mass, thermal, and safety margins up to qualification.
Coordinate with Systems Engineering and Vehicle Design to manage interfaces between the propulsion system and adjacent vehicle subsystems.
Thermal Analysis & Management
Oversee steady-state and transient thermal analyses of propulsion components, ensuring compliance with temperature limits across all mission phases (ground operations, in-orbit, re-entry).
Review and approve thermal models, ensuring analytical rigor and correlation with test data.
Guide the team in identifying test platforms and defining test objectives.
Structural & Mechanical Design
Direct the mechanical design of propulsion structures, and brackets, ensuring adequate strength, stiffness, and fatigue life under load cases.
Oversee FEA and hand-analysis efforts to verify structural margins, and lead disposition of any margin concerns or design anomalies.
Working closely with AIT team to define and validate integration sequences.
CAD, Documentation & Configuration Control
Define and enforce CAD standards, model maturity gates, and drawing release processes within the design office, ensuring consistency and traceability across the propulsion product tree.
Oversee the maintenance of the engineering master model and associated bill of materials (BOM), coordinating with PDM/PLM administrators to keep configuration control current.
Ensure design documentation — including ICDs, engineering drawings, design notes, and specification trees — is complete, reviewed, and baselined on schedule.
You will perform your duties principally at the Company's premises in Bordeaux and may be required to travel from time to time to our company’s premises in Munich in the course of your duties.
5+ years of hands-on experience in propulsion system design for launch vehicles, spacecraft, or space capsules, with direct exposure to liquid propulsion architectures.
Demonstrated ability to work across thermal, structural, and mechanical domains — you don't need to be the deepest expert in every field, but you can lead and critically review work across all three.
A track record of managing small-to-mid-size engineering teams in a fast-paced, hardware-delivery environment, with the ability to develop junior engineers while maintaining technical standards.
Prior experience running or closely supervising thermal (e.g. Thermal Desktop, ANSYS or equivalent) and structural analyses (e.g. NASTRAN or equivalent), and strong familiarity with CAD environments (CATIA, NX, or equivalent).
Experience managing complex system-level trades and interfaces and formal design review processes
Skills and Behaviors:
A hands-on approach to problem-solving, combined with a collaborative mindset to work across multidisciplinary teams
Excellent organizational skills and ability to multitask
Capability of working autonomously whilst collaborating productively with remote teams
Positive and flexible attitude in a constantly evolving environment
Grit to get the job done
Ability to communicate effectively with a wide variety of audiences
Behaviors consistent with The Exploration Company’s core values of Commitment, Innovation, Trust, Quality, and Teamwork
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
The heart of a spacecraft lies in its engine, and that's why we, at The Exploration Company, are dedicated to developing our own cutting-edge Propulsion Systems ensuring the highest level of efficiency and reliability in our space endeavours.
We are seeking a talented Combustion Engineer to join our Future Project division. As a key member of our engineering team, you will be responsible for contributing to designing, analyzing, and optimizing combustion devices for cryogenic rocket engines.
Provide support to global combustor fluidic system development through application of both theory and/or CFD.
Drive and/or contribute to injector design and optimisation against combustor requirements and design intent using theory and/or CFD.
Support definition of instrumentation for hot-fire testing and assist with post-test data interpretation and CFD/model correlation.
Reduce and analyse hot-fire test data to derive performance and combustion-stability metrics, and maintain associated data processing tools
Support design reviews with clear technical justification of analysis methods, assumptions, and margins.
Minimum of a Master's degree in Aerospace Engineering, Mechanical Engineering, or a related discipline.
3+ years of relevant/equivalent experience in combustion, propulsion, or reacting-flow engineering.
Solid foundation in bi-liquid rocket combustion processes.
Strong background in reacting-flow CFD (e.g. ANSYS, OpenFOAM, Converge) using RANS and/or LES
Strong scripting and data-analysis ability in Python or similar
Exposure to liquid rocket injector CFD.
Experience with combustion of cryogenic propellants.
Familiarity with combustion instability, thermoacoustics, or uncertainty quantification is beneficial.
Experience supporting or participating in hot-fire test campaigns is beneficial.
Structured and methodical approach to problem solving.
Demonstrated rigour: checks reference calculations, documents assumptions, and treats a discrepancy between prediction and test as a problem to be solved rather than dismissed.
Ability to work under technical uncertainty and iterate models as test data becomes available.
Clear written and verbal communication of assumptions, methods, and conclusions.
Comfort working in cross-disciplinary teams across thermo-mechanical, systems, and test engineering.
Strong analytical rigor and attention to detail.
Demonstrates behaviors consistent with The Exploration Company's core values of Mission, Vision, Integrity, Excellence, and Teamwork.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
As a talented Component Manufacturing Engineer, you will own the manufacturing processes that turn solenoid isolation valve designs for our storable propulsion system into flight hardware — from precision machining and assembly through cleaning,
inspection, and supplier coordination..
Define and develop manufacturing processes for solenoid isolation valve components — machining, welding/brazing, coil winding, seal installation — ensuring compatibility with storable propellants.
Develop and qualify tooling and fixtures to ensure repeatable, high-precision assembly of valve components.
Drive continuous improvement of yield, cycle time, and cost through process optimization.
Define and enforce precision cleaning and contamination control procedures compliant with cleanliness requirements for storable-propellant-wetted components.
Support valve assembly and integration operations, ensuring build standards and travelers are followed.
Troubleshoot manufacturing issues — leaks, misalignment, seal damage — and implement corrective actions.
Coordinate manufacturing activities with the internal machine shop and external suppliers for machined and specialty parts (solenoid coils, seals, seats).
Support make-or-buy decisions and supplier qualification for valve components.
Provide manufacturing input during design reviews to ensure manufacturability of new valve designs.
Define inspection plans and acceptance criteria for valve components (dimensional, NDI, leak check).
Maintain manufacturing documentation, work instructions, and travelers, ensuring traceability and configuration control.
Support root-cause investigations for manufacturing non-conformances and drive corrective and preventive actions.
You will perform your duties principally at the Company's premises in Bordeaux and may be required to travel from time to time to our company’s premises in Munich in the course of your duties.
B.S. in mechanical, manufacturing, or aerospace engineering, with experience manufacturing precision flight hardware — valve or fluid-component experience is a strong plus.
Hands-on experience with machining, welding/brazing, or precision assembly processes.
Experience with cleanliness and contamination control for propellant-wetted hardware; storable/hypergolic propellant experience is a strong plus.
Familiarity with GD&T and inspection methods (CMM, leak testing).
Experience working with suppliers and production quality processes.
Familiarity with AS9100 or similar aerospace quality systems is a plus.
Skills and Behaviours:
A hands-on approach to problem-solving, combined with a collaborative mindset to work across multidisciplinary teams
Excellent organizational skills and ability to multitask
Capability of working autonomously whilst collaborating productively with remote teams
Positive and flexible attitude in a constantly evolving environment
Grit to get the job done
Ability to communicate effectively with a wide variety of audiences
Behaviors consistent with The Exploration Company’s core values of Commitment, Innovation, Trust, Quality, and Teamwork
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
As a talented Valve / Component Test Engineer, you will plan and execute the test campaigns that qualify and accept solenoid isolation valves for our storable propulsion system — from functional and leak testing through life-cycle and propellant-compatibility testing.
Test Planning & Procedure Development
Develop test plans and procedures for solenoid isolation valve qualification, acceptance, and life testing (functional response, leak, proof/burst, cycle life, propellant compatibility).
Define test success criteria and correlate them with valve functional and performance requirements.
Support V&V planning in coordination with system functional and design engineers.
Test Execution & Data Acquisition
Execute functional, performance, and environmental test campaigns on solenoid valves (cold flow, vacuum, thermal, vibration, EMI where applicable).
Set up and operate test benches, instrumentation, and data acquisition systems for valve response time, leak rate, and flow characterization.
Reduce and analyze test data, comparing results against predictions and requirements.
Anomaly Investigation & Root Cause
Investigate test anomalies — leakage exceedances, actuation failures, response time drift — and lead root cause analysis.
Support disposition of non-conformances and coordinate corrective actions with design and manufacturing.
Document test results and anomalies for certification and configuration traceability.
Test Facility, Tooling & Safety
Design and maintain test fixtures, GSE, and facility setups for valve testing, including propellant-compatible test benches.
Ensure safe handling procedures for test operations, particularly where storable/hypergolic propellant simulants or fluids are used.
Continuously improve test infrastructure, automation, and data processing tools.
You will perform your duties principally at the Company's premises in Bordeaux and may be required to travel from time to time to our company’s premises in Munich in the course of your duties.
B.S. in mechanical or aerospace engineering, with 3+ years of hands-on test engineering experience with valves or fluid components.
Experience with functional, leak, and life-cycle testing of solenoid or similar valves.
Familiarity with storable/hypergolic propellant test safety practices is a strong plus.
Experience with DAQ systems and instrumentation (pressure, flow, position sensors).
Root-cause investigation experience.
Familiarity with applicable test standards (e.g., NASA, ECSS, or equivalent).
Skills and Behaviours:
A hands-on approach to problem-solving, combined with a collaborative mindset to work across multidisciplinary teams
Excellent organizational skills and ability to multitask
Capability of working autonomously whilst collaborating productively with remote teams
Positive and flexible attitude in a constantly evolving environment
Grit to get the job done
Ability to communicate effectively with a wide variety of audiences
Behaviors consistent with The Exploration Company’s core values of Commitment, Innovation, Trust, Quality, and Teamwork
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
As a talented Valve Development Engineer, you will lead the design and development of solenoid isolation valves for our storable propulsion system, from concept through qualification — owning the electromagnetic, mechanical, and sealing design that makes the valve work reliably over the mission life.
Valve Design & Development
Support the design of solenoid isolation valves from concept through qualification, balancing performance, mass, reliability, and manufacturability.
Define and mature valve architecture — poppet/seat design, actuation mechanism, sealing concept — to meet functional and interface requirements.
Perform mechanical sizing and trade studies (force margins, spring rates, stroke, response time) to support design decisions.
Electromagnetic & Actuation Design
Design and analyze the solenoid actuator — coil, armature, magnetic circuit — to meet response time, power, and force margin requirements.
Collaborate with electrical engineers on coil drive electronics and EMI/EMC considerations.
Support trade-offs between actuation force, power consumption, and thermal dissipation.
Materials, Sealing & Propellant Compatibility
Select materials and seal designs compatible with storable propellants, ensuring long-term compatibility and low permeation/leakage.
Define sealing concepts — elastomeric or metal-to-metal — balancing leak-tightness, cycle life, and contamination sensitivity.
Coordinate with materials engineering on qualification of propellant-wetted materials.
Design Verification & Cross-Functional Coordination
Define and support the verification plan for valve qualification, working closely with test engineers on test setup and success criteria.
Collaborate with manufacturing engineers to ensure design manufacturability and testability.
Support anomaly investigations and root cause analysis for valve-level issues, feeding lessons learned back into the design.
You will perform your duties principally at the Company's premises in Bordeaux and may be required to travel from time to time to our company’s premises in Munich in the course of your duties.
B.S. in mechanical, manufacturing, or aerospace engineering with hands-on experience designing valves or similar electromechanical fluid components for space or aerospace applications.
Experience in solenoid/electromagnetic actuator design (magnetic circuit design, coil design) is a strong plus.
Strong understanding of sealing technology, elastomer and metal seal design, and propellant compatibility; storable propellant experience preferred.
Proficiency in CAD (CATIA, NX, or equivalent) and mechanical analysis tools.
Experience defining and supporting qualification test campaigns for valves.
Familiarity with applicable standards for valve qualification (NASA, ECSS, or equivalent).
Skills and Behaviours:
A hands-on approach to problem-solving, combined with a collaborative mindset to work across multidisciplinary teams
Excellent organizational skills and ability to multitask
Capability of working autonomously whilst collaborating productively with remote teams
Positive and flexible attitude in a constantly evolving environment
Grit to get the job done
Ability to communicate effectively with a wide variety of audiences
Behaviors consistent with The Exploration Company’s core values of Commitment, Innovation, Trust, Quality, and Teamwork
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
Key Responsibilities:
Design, develop, and maintain Electrical Ground Support Equipment (EGSE) sub-system and system level testing
Define and implement EGSE hardware and software architectures tailored to specific test scenarios, AIT campaigns, and HiL environments
Develop LabVIEW-based applications, for both desktop and real-time platforms (e.g., PXI, cRIO), supporting checkout, functional, and pre-launch test operations
Integrate and configure NI VeriStand as part of real-time test setups, including simulation of spacecraft interfaces and umbilical/harness verification
Design and support power, signal conditioning, and telemetry/telecommand interfaces between EGSE and the Unit/Spacecraft Under Test
Support RF test activities for the TT&C chain, including uplink telecommand injection, downlink telemetry reception, and coordination of conducted/radiated test setups with the RF/comms subsystem team
Collaborate with cross-functional teams (AIT, systems, RF, electrical, and FSW) to ensure seamless integration of EGSE hardware and software into functional test platforms
Support test execution, data acquisition, logging, and automated reporting during integration, functional, and environmental test campaigns
Create and maintain technical documentation, including EGSE architecture specifications, ICDs, code documentation, and user/operator guides
Provide support for debugging, troubleshooting, and continuous improvement of EGSE and test platforms, including on-site support during AIT/launch campaigns
Develop a robust and scalable EGSE software framework supporting reuse and modularity across projects
Define test automation workflows
Design and maintain EGSE-to-EUT interface hardware (harnesses, breakout boxes, simulators, load banks) with correct isolation, protection, and safety interlocks
Own cable and harness design for EGSE-to-EUT connections, including pinout definition, connector selection, shielding/grounding strategy, and drawing generation
Coordinate closely with electrical, RF, and systems engineers to ensure requirements traceability, interface compatibility, and test coverage
Drive the continuous evolution of EGSE/HiL infrastructure, with an emphasis on performance, reliability, and maintainability
Ensure all solutions meet space-grade quality, safety, and cleanliness standards (e.g., ESD, contamination control), aligned with project and range safety requirements
Must-Have Skills and Qualifications
Bachelor's or Master's degree in Electrical Engineering, Aerospace Engineering, Computer Science, or a related field
Proficiency in LabVIEW, including desktop and real-time application development
Hands-on experience with NI VeriStand in real-time test environments
Familiarity with NI TestStand for test automation and execution management
Solid understanding of EGSE/test platform architectures, hardware/software integration, and real-time systems
Experience with spacecraft electrical interfaces: power distribution/simulation, discrete/analog telemetry, telecommand encoding, and standard space communication protocols (e.g., CAN, RS422/485, MIL-STD-1553, SpaceWire, Ethernet)
Working knowledge of ICD development and requirements traceability between EGSE and flight hardware
Ability to influence and shape ICDs and connector/pinout definitions upstream, rather than solely implementing to a fixed interface — working with electrical/systems engineers early in the design cycle to ensure EGSE testability and harness manufacturability
Experience with cable/harness design, including connector selection, pinout/wiring diagrams, shielding and grounding practices, and generation of harness drawings (e.g., in ECAD tools or draw.io/Visio equivalents)
Familiarity with RF test equipment and techniques (signal generators, spectrum/vector signal analyzers, RF switches, calibrated attenuators) for TT&C uplink/downlink stimulation and monitoring
Strong debugging and troubleshooting skills, with a structured and methodical approach, including at hardware bring-up and integration level
Experience working with LabVIEW FPGA is appreciated
Ability to write and integrate Python scripts to extend test workflows or support automation tasks
Familiarity with test/measurement hardware (oscilloscopes, DMMs, power supplies, electronic loads) and their programmatic control (e.g., VISA/SCPI)
Understanding of EMC/ESD-safe practices for handling flight and flight-like hardware
Fluent in English, with excellent written and verbal communication skills
Proven ability to work independently, drive initiatives end-to-end, and deliver in a high-paced environment
Willingness to travel/support on-site AIT or launch site campaigns is a plus
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
The Avionics Manufacturing Team Lead will be responsible for managing a team of technicians to assemble, integrate, and test avionics equipment for the Nyx spacecraft, ensuring that schedule, quality, and process discipline are maintained at every stage of production.
Key Responsibilities
Team Management & Daily Operations
Lead and coordinate a team of avionics technicians across assembly, integration, and test activities.
Plan, prioritise, and assign weekly tasks to meet programme milestones.
Conduct regular team meetings and maintain a visible schedule to track progress and flag risks early.
Serve as the first point of escalation for technical and workload issues within the team.
Be available for the team to help and solve problems in the workshop (avionics lab)
Schedule & Quality Control
Maintain a detailed short-term production schedule, tracking task completion against plan.
Enforce quality standards throughout the assembly and integration process, ensuring deliverables meet defined acceptance criteria.
Balance throughput and quality, escalating trade-offs to engineering management when necessary.
Manufacturing Process Definition
Define, document, and continuously improve manufacturing and assembly procedures for avionics equipment.
Develop work instructions, and test procedures in coordination with design and quality engineers.
Identify process bottlenecks and implement solutions to increase build efficiency without compromising quality.
Interface with Design & Engineering Teams
Act as the primary manufacturing interface to avionics design engineers, translating design intent into executable production tasks.
Participate in design reviews (PDR, CDR, TRR) and provide manufacturing readiness inputs.
Documentation & Compliance
Ensure all manufacturing activities are fully documented and traceable.
Maintain build records, non-conformance reports, and configuration control logs.
Ensure compliance with applicable space-grade standards (ECSS, NASA-STD) and internal quality procedures.
Required Qualifications
Bachelor's or Master's degree in Electrical Engineering, Electronics, Aerospace Engineering, or a related field.
Minimum 4–6 years of hands-on experience in electronics or avionics assembly, integration, and test.
Demonstrated experience managing or leading a team of technicians in a production or integration environment.
Proven ability to maintain schedule adherence under pressure while upholding high quality standards.
Strong understanding of avionics systems and electronics assembly processes (PCB assembly, harness routing, connector crimping, conformal coating, etc.).
Experience defining and writing manufacturing procedures, work instructions, and test protocols.
Ability to read and interpret electrical schematics, assembly drawings, and ICD documents.
Fluent in English; strong communication skills for cross-functional coordination. German languange is big plus.
Desirable Skills
Previous experience in the space, defence, or aerospace sector.
Familiarity with ECSS/NASA standards and derating practices for space hardware.
Experience with quality management systems such as EN9100 or ISO 9001 — knowledge of audits, NCR processes, and quality gates is a strong plus.
Knowledge of environmental testing requirements: vibration, thermal vacuum, EMC.
Experience interfacing with design teams during early-stage product development.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
Our Future Projects unit is dedicated to expanding and complementing these capabilities by conceptualizing and pre-developing new technologies, products and programs.
We want you as a talented propulsion system engineer to help us conceptualize new launch and space trasportation solutions, to mature critical technologies and drive the projects towards implementation stage. You will be part of the Launch Systems Team in the Future Programs Department, and will report to the Lead Launcher Programs.
In your capacity as a Future Projects Propulsion System Engineer, your role will be continuously evolving, but day to day your duties will include:
Define propulsion system architectures for future projects within the TEC launcher programs, including, but not limited:
Perform trade-offs and technical investigations at system and subsystem level.
Define system-level requirements and ensure flow down and consistency of lower-level requirements.
Define concept of operations and operational procedures for propulsion systems
Define and maintain the functional and product breakdown of the system.
Create and maintain the technical budgets (mass, propellant, inert gas, power, etc.).
Contribute to the development, V&V and industrialization plan.
Contribute to the MAIT concept trade-offs
Contribute to the co-engineering sessions between the engineering team and potential external partners (setup the agenda, coordinate priorities, take decisions, take the MoM, track the actions).
Own propulsion-specific future projects, work packages and bids within the launcher programs
Support the commercial and program teams in writing and negotiating proposals for Future Projects.
Provide propulsion system related project work
Coordinate datapack definition and delivery, RIDs management and day-to-day work with subcontractors
In the role of Future Projects System Engineer ideally, you will have the following:
Advanced degree (MSc) in aerospace engineering, systems engineering, or another related field.
5+ years of experience in the aerospace industry, preferably in a launch system program
Experience in early development phase (Phase 0/A/B) propulsion system engineering
Good knowledge in programming (Python, Fortran, Matlab...).
Experience with EcosimPro or comparable analysis tools
Hands-on operational experience in propulsion testing or launch
Fluent in English. German, French and Italian is an asset.
Skills and Behaviors:
Strong oral and written communication skills.
Strong analysis and problem-solving skills.
Strong organizing and prioritization of tasks.
Positive and flexible attitude to get the job done.
Ability to communicate at all levels of the business.
Demonstrates behaviors consistent with The Exploration Company’s core values of Vision, Competence, Integrity and Passion.
Space enthusiast: ready to change the European space industry.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
Key Responsibilities
Actively promote The Exploration Company to institutions in Europe to generate demand for cargo, space engines, moon and in-orbit services,
Build, own, and deliver the sales strategy, revenue targets, and pipeline across priority markets and accounts
Map target segments and decision makers; open doors and build trusted, senior-level relationships
Identify new opportunities and leads; qualify, prioritize, and maintain process discipline and accurate cash-in forecasting
Lead captures and bids end-to-end: win strategy, solution shaping, proposal management, pricing, and reviews
Negotiate and close Consortium Agreement, SoWs, and partnership agreements in coordination with Future business, Legal and Finance
Ensure what is sold is deliverable by writing the bids in cooperation with Programme teams (Nyx or Future projects); run smooth handover to Programs and follow through to acceptance and invoicing
Represent the company at key events and with institutions (ESA, EU, NATO, agencies, clusters) through workshops, conferences, and meetings
Install clear sales KPIs and cadence (weekly report, Monthly forecast); report performance and to executive management
Recruit, coach, and manage a small, high-performing team and foster a customer-centric culture
Reports to: Chief Government Officer
Profile
10 years + of experience leading B2G sales in the space, aerospace, defense, high-tech, or another complex technical industry.
Proven track record of closing large, multi-stakeholder, long-cycle contracts.
Experience selling to institutional customers internationally.
Strong understanding of technical products, systems engineering, programme delivery, and contractual risk.
Experience managing strategic accounts, capture campaigns, tenders, and partnership ecosystems.
Previous experience building or scaling a sales function is highly desirable.
Location: Munich, Bordeaux, Paris, or Turin (hybrid)
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We want you as a highly skilled and experienced AIT Electrical Engineer to help us in our mission by leading the design, commissioning, and debugging of electrical systems for various propulsion test benches, as well as testing of engine electrical systems. This is a dynamic, hands-on engineering position that combines systems-level thinking with practical implementation, demanding both deep technical expertise and the ability to collaborate across multidisciplinary teams.
Key responsibilities:
In your capacity as an AIT Electrical Engineer, your role will be continuously evolving and often diverse, but day to day your duties will include:
Contribute to the design and development of electrical systems and architecture for test benches, including power distribution, signal conditioning, and control systems.
Lead assembly, integration and testing of electrical components for turbomachinery and engines.
Define test procedures, document results and trace non-conformities
Specify and review electrical schematics, panel layouts, and wiring diagrams to ensure system integrity and compliance with industry standards.
Collaborate with the team to integrate sensors, actuators, power supplies, and DAQ systems.
Conduct system-level troubleshooting and debugging, using advanced diagnostic tools (e.g., oscilloscopes, logic analyzers, DMMs).
Perform root cause analysis and implement engineering solutions to improve system robustness and reliability.
Provide technical leadership during assembly, commissioning, and test operations.
Document all designs, test results, and configuration changes; contribute to standard operating procedures and risk assessments.
Ensure all electrical systems comply with safety and regulatory standards.
Qualifications:
Minimum of a Bachelor’s degree in Electrical Engineering, Electronics, or a related technical field.
2+ years of experience in electrical engineering, preferably in an aerospace environment
What we would love to see from you:
Strong understanding of electrical design principles, system integration, and instrumentation.
Experience with high voltage systems (200V - 1000V, AC/DC).
Comfortable working hands-on with electrical hardware, wiring, test equipment and instrumentation.
Proven experience designing and commissioning electrical systems, and with testing of electrical systems (e.g. electrical motors and batteries)
Hands-on experience with cabling and harness manufacturing
Proficiency in using common electrical test equipment and CAD tools (e.g., EPLAN, AutoCAD Electrical).
Experience with industrial control, automation or data-acquisition systems (e.g. Beckhoff).
Knowledge of electrical standards and best practices for high-reliability applications
Familiarity with test bench operations would be a plus
Comfortable operating in a fast-paced, evolving environment with a hands-on approach.
Fluency in English, both written and verbal.
A passion for space exploration and a mindset focused on innovation, precision, and safety.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
As AIT Senior Project Manager, you will streamline the Assembly, Integration and Test activities for Nyx Earth, ensuring that the vehicle is integrated, tested and prepared for launch safely, on schedule and within budget.
You will report to the Chief Program Officer, who is also the Program Manager for Nyx Earth. Travel to production, test and launch locations is required, majority of them being in Europe.
Manage the AIT project, providing guidance, motivation and strategic direction.
Define AIT objectives, scope, deliverables, milestones and interfaces with the program team.
Build an effective operating rhythm across engineering, manufacturing, quality, suppliers, operations and launch services.
Support the AIT strategy, including the integration sequence, verification approach and test philosophy.
Build and maintain the AIT work logic, critical path and readiness criteria in collaboration with System Engineering and Quality.
Coordinate the integration of spacecraft subsystems, software, ground support equipment and associated facilities.
Plan and manage functional, performance, environmental and mission-level testing.
Ensure that test results, anomalies and verification evidence are properly reviewed and closed.
Define and secure the facilities, tooling, test equipment and ground support equipment required for the campaign.
Coordinate facility readiness, test-site interfaces, reviews and launch-site preparation.
Develop and manage the AIT budget, resource plan and external-service requirements.
Develop and maintain a detailed AIT schedule with clear milestones, dependencies and schedule margin.
Monitor progress and identify delays, resource conflicts and critical-path risks early.
Lead recovery plans when supplier, technical or operational issues affect the program.
Coordinate cross-functional teams, including engineering, manufacturing, quality, safety and external partners.
Provide clear and transparent reporting to the Chief Program Officer and program stakeholders.
Establish clear decision-making and change-control processes with customers and suppliers.
Identify and assess AIT risks, developing mitigation and contingency plans.
In collaboration with Quality and Safety, manage non-conformances, deviations, waivers, anomalies and corrective actions.
Ensure that hardware, software, AIT documentation, procedures, readiness reviews, test configurations remain properly controlled and traceable.
Monitor supplier readiness, deliveries, technical maturity and documentation.
Define clear AIT acceptance criteria and deliverables for suppliers.
Lead supplier recovery actions when technical mistakes or late deliveries threaten the schedule or mission.
Master’s degree in Aerospace Engineering, Mechanical Engineering, Systems Engineering or a related discipline.
6+ years of experience in project or program management.
Experience in AIT, AIV, system integration, verification or test campaign leadership.
Proven experience managing complex spacecraft, launch vehicle, aircraft or other safety-critical hardware projects.
Strong technical background in spacecraft AIT, system engineering and requirements verification.
Experience with environmental testing, test facilities, ground support equipment and launch-site activities.
Demonstrated experience in budget management, resource allocation, schedule control and risk mitigation.
Strong supplier-management and problem-solving skills.
Excellent leadership and interpersonal skills, with the ability to manage multidisciplinary teams.
Excellent written and verbal communication skills in English.
Willingness to travel frequently, mostly across Europe.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are also developing different types of propulsion systems to power our future vehicles and missions. As a talented Propulsion Test Engineer, you will be responsible for the test and analysis of our future propulsion systems.
Key Responsibilities / Tasks:
In your capacity as a Propulsion Test Engineer, your role will be continuously evolving, but day to day your duties will include:
Develop and execute tests at the engine and component level to evaluate hardware performance.
Developing test plans, test objectives and schedules consistent with requirements and timelines; leading daily test operations and generating test reports.
Autonomously leading risk assessment analyses and defining mitigation actions to ensure personnel and hardware safety during all test campaigns.
Interpreting P&IDs and generating test sequences, balancing the risk, needs of the test and the limits of the test bench and test article.
Working hand in hand with development engineers, test bench team, AIT team and external partners to support all test operations on internal and external test facilities.
Supporting rapid test data processing with development engineers to guide the remainder of the test campaign and plan future test campaigns.
Defining, developing and updating test procedures and guidelines to improve test operations.
Preparing technical documentation, including detailed procedures, test reports, design reviews, and performance analyses.
What we would love to see from you:
Bachelor's, master's or PhD in aerospace engineering, mechanical engineering, or a related field (master's and above preferred).
2–5 years of experience in propulsion testing or related fields.
Proficiency in propulsion chemistry, thermodynamics, and fluid dynamics.
Proven hands-on experience with engine testing or equivalent.
Background in cryogenic propulsion will be a big plus.
Experience with commonly used simulation tools in propulsion testing (e.g., CEA).
Proficiency in python programming language is a plus.
Exposure to CAD Software (Siemens NX, CATIA, or similar) and Geometric Dimensioning and Tolerancing.
Strong problem-solving and analytical abilities.
Excellent communication and leadership skills, with the ability to convey complex concepts to diverse audiences.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
As a Fluidic Components Technical Owner, you will own the technical follow-up of suppliers providing assigned Nyx Earth fluid-control equipment, including the technical baseline, evidence path, supplier development and qualification path, delivery readiness, integration support, and operations feedback loop.
You will work closely with propulsion system engineering, equipment owners, program management, procurement, quality, PA, supplier quality, AIT/MAIT, test, M&P, safety, operations, and suppliers or manufacturing partners providing the assigned components. The reporting line is to be confirmed by Propulsion leadership.
Own the assigned fluidic-component technical baseline, including requirements, interfaces, verification methods, qualification logic, review data, and acceptance criteria.
Maintain a system-level view of fluidic, mechanical, thermal, electrical, command, cleanliness, materials-compatibility, safety, operations, and integration interfaces.
Follow supplier development, qualification, acceptance, integration, and operations-support logic for assigned valves, regulators, fill/drain equipment, pressure-control equipment, or related fluidic components.
Keep TEC's technical position clear when following suppliers, manufacturing partners, special processes, or test houses.
Review supplier deliverables, drawings where available, analyses, procedures, inspection evidence, test results, review packages, deviations, and non-conformance inputs.
Make leakage, response, cleanliness, compatibility, lifetime, production repeatability, evidence gaps, delivery risks, and recovery options visible early.
Support MAIT/AIT preparation, integration, test procedures, acceptance evidence, flight-operations preparation, flight-data review, and abnormal-behaviour treatment for assigned fluidic equipment.
Strong aerospace, mechanical, propulsion, fluids, or related engineering background.
Experience with spacecraft propulsion fluidic components such as valves, regulators, fill/drain equipment, pressure-control equipment, or related fluid-control hardware.
Practical understanding of requirements, verification, cleanliness, materials compatibility, leakage, actuation, testing, qualification, manufacturing support, and failure modes.
Ability to own technical supplier follow-up for complex hardware across requirements, interfaces, qualification, delivery, integration, and anomaly support.
Strong communication with propulsion, procurement, quality, MAIT/AIT, test, program, suppliers, manufacturing partners, and operations stakeholders.
Fluency in English; French and/or German are useful assets.
You keep the technical position clear even when ownership, supplier evidence, schedule, or integration constraints are messy.
You judge component decisions by spacecraft, mission, safety, integration, cost, and schedule impact.
You make evidence gaps, assumptions, weak test results, open points, and deviations visible early.
You balance fast development with configuration, cleanliness, verification, and qualification discipline.
You build trust with suppliers, partners, engineers, and leadership through facts and follow-through.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are seeking an experienced Senior Composite Engineer to support the development, verification, and qualification of primary and secondary composite structures for space applications.
The successful candidate will bring strong expertise in composite materials, structural mechanics, and verification methodologies, combined with a solid understanding of the complete lifecycle of structural hardware development. The role requires the ability to define robust technical solutions, assess structural integrity, support manufacturing activities, and contribute to the delivery of flight-quality composite structures.
The ideal candidate combines strong engineering fundamentals with a pragmatic mindset and understands how requirements, design, analysis, manufacturing, inspection, testing, and qualification activities contribute to the successful delivery of high-reliability hardware.
Lead the design, development, verification, and qualification of composite structural hardware for space applications.
Define structural concepts and perform design trade-offs considering reliability, mass, manufacturability, schedule, and cost.
Develop technical specifications covering structural requirements, materials, manufacturing processes, inspection, and verification activities.
Support the selection of materials, manufacturing processes, laminate architectures, and structural interfaces.
Identify and assess critical failure modes throughout the product lifecycle and ensure appropriate mitigation measures are implemented.
Support supplier management activities, including technical oversight of build-to-print and build-to-specification hardware.
Review supplier analyses, manufacturing documentation, inspection reports, test reports, and non-conformance dispositions.
Support anomaly investigations, root cause analyses, and corrective action implementation.
Interface with systems engineering, manufacturing, AIT, quality, procurement, and program teams.
Present technical recommendations and structural justifications during project reviews and decision boards.
Contribute to the development of robust, manufacturable, inspectable, and flightworthy structural solutions.
Master's degree or PhD in Mechanical Engineering, Aerospace Engineering, Materials Engineering, or a related discipline.
Minimum 8 years of experience in structural analysis and mechanical justification of aerospace, space, or other high-performance composite structures.
Proven experience in the design, development, verification, and qualification of composite structures.
Strong knowledge of composite materials, manufacturing processes, structural mechanics, and damage tolerance principles.
Proficiency in finite element modelling and simulation methods for static, buckling, dynamic, thermo-mechanical, and joint analyses.
Proficiency in finite element analysis (FEA) software (Altair suite and Nastran are preferable).
Good understanding of composite design allowables, materials and process qualification, structural testing, and analysis-to-test correlation.
Experience with bolted and bonded joints, load introduction, and interface justification in composite structures.
Experience with CAD software (Siemens NX) is a plus,
Fluent in English. Knowledge of German, French or Italian is an asset.
Strong engineering judgement, analytical thinking, and problem-solving capabilities.
Ability to take ownership of complex technical topics and drive them to closure.
Proactive and pragmatic mindset, capable of balancing technical excellence, schedule constraints, and business objectives.
Strong communication and collaboration skills, with the ability to work effectively across multidisciplinary teams and external suppliers.
Ability to identify risks early, challenge assumptions, and make data-driven decisions.
Comfortable operating across design, analysis, manufacturing, testing, and qualification activities.
Demonstrates behaviors aligned with The Exploration Company values, including Mission, Integrity, Excellence, Vision and Teamwork.
Motivated to contribute to the development and delivery of reliable, flightworthy space hardware in a fast-paced and ambitious environment.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are seeking a talented Propulsion Functional Engineer to join the Storm engine project. As a key member of our System Team, you will play a central role in defining the functional architecture of the Storm engine, ensuring seamless integration and correct interaction between subsystems to meet overall mission requirements.
As a Propulsion Functional Engineer, your responsibilities will include:
Functional Engineering
Contribute to architecture trade-off studies, sensitivity analyses, and risk assessments, as well as component selection and make-or-buy decisions
Contribute to the evaluation and optimization of the engine architecture and operating conditions
Develop and maintain functional performance models of the propulsion system using simulation frameworks such as EcosimPro and Python
Systems Engineering
Contribute to the definition and allocation of functional requirements for the engine and its subsystems
Contribute to FMEA (Failure Mode and Effects Analysis) to ensure that the system architecture meets reliability and safety targets
Testing & Model Validation
Contribute to the definition of demonstrator architectures and operating conditions
Analyse test data and use test results to validate and anchor system models
Master's Degree or higher (or NZ and AUS \"Bachelor with honors\") in Mechanical Engineering, Aerospace Engineering, or a related and applicable technical discipline. Alternatively, a bachelor's degree with substantial relevant experience
Minimum 2 years of proven experience working with cryogenic propulsion systems
Strong knowledge of fluid dynamics and thermodynamics
Fluency in English; proficiency in German or French are an asset
Basic knowledge of aerospace standards (e.g. ECSS, NASA guidelines)
Experience with modelling and simulation tools (e.g. EcosimPro) and/or experience writing scripts in Python
(Optional) Hands-on experience developing hardware from concept to working prototypes is an asset
Skills and Behaviors
Strong ability to work in close collaboration with others
Strong oral and written communication skills
Strong analysis and problem-solving skills
Strong research skills and ability to infer useful information from partial or even contradictory sources
Drive towards excellence coupled with ability to work within time constraints
Proficiency in organization and prioritization of tasks
Behavior consistent with The Exploration Company’s core values of Mission, Vision, Integrity, Excellence and Teamwork
Enthusiasm for space exploration: be ready to have an impact on the future global space industry.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are seeking an experienced Spacecraft Thermal Verification Engineer to join our Thermal Control System team. You will be the technical lead for the preparation, execution and exploitation of thermal verification activities by test across the Nyx program. You will own spacecraft-level thermal test campaigns, including Thermal Vacuum (TVAC) and Thermal Balance testing, support AIT with the Thermal Control System Flight Model integration and verification, coordinate thermal qualification activities with other sub-systems, and ensure compliance with spacecraft verification requirements.
You will work closely with System Engineering, AIT, Test facilities, Program, Avionics and Propulsion. You will be part of the TCS & ECLSS Team and will report to the Principal Thermal Control System Engineer.
Define test objectives, verification logic and success criteria of the Nyx system TVAC campaign
Develop test plans, test procedures and operational concepts with other functional chains and AIT
Prepare and lead Test Readiness Reviews, Test Review Board and NCR Board
Lead test logic and execution of spacecraft, subsystem and components thermal test campaigns.
Drive anomaly and NCR investigations and technical decision-making during testing.
Present campaign status and recommendations to project leadership.
Deliver test reports and verification evidence packages
Ensure thermal requirements are properly verified through test, inspection or demonstration.
Build and maintain verification events.
Drive verification closure toward Qualification Review and Flight Readiness Review.
Support Technical Reviews, Design Reviews and Qualification Reviews.
Ensure TCS verification activities by tests remain aligned with program priorities, schedules and risks.
Work alongside AIT teams during spacecraft assembly and integration.
Define thermal instrumentation strategies and test configurations.
Support installation, verification and troubleshooting of thermal hardware.
Participate in integrated spacecraft functional testing.
Support leak testing, functional testing, fluid loop commissioning and system check-outs.
Support pre-test thermal predictions.
Analyze thermal test results.
Assess subsystem and spacecraft performance.
Identify design improvements and operational recommendations.
Ensure lessons learned are captured and disseminated across the organization.
MSc or PhD in Aerospace Engineering, Mechanical Engineering, Thermodynamics or equivalent.
10+ years' experience in spacecraft thermal engineering
Proven experience leading Thermal Vacuum and Thermal Balance campaigns.
Experience with Spacecraft qualification and acceptance programs
Experience supporting spacecraft assembly, integration and test activities.
Strong understanding of thermal control systems and their implementation (MLI, Temperature sensors, Heaters, Pumped Fluid Loops...)
Experience working with suppliers and external test facilities.
Experience with thermal instrumentation, DAQ systems and test facility interfaces
Experience with test-data processing tools, preferably Python, MATLAB or equivalent
Fluent in English. German, French and Italian are an asset
Strong oral and written communication skills
Strong analysis and problem-solving skills
Strong organizing and prioritization of tasks
Positive and flexible attitude to get the job done
Demonstrates behaviors consistent with The Exploration Company’s core values of Vision, Competence, Integrity and Passion
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We want you as a talented GNC Engineer to contribute to the GNC subsystem design, testing, verification and validation of our vehicles. As a GNC Engineer, you must have a firm grasp of spacecraft GNC concepts and applications. You will work on all aspects of the GNC life cycle: spacecraft and mission conceptual design, subsystem requirements development, algorithm development, software implementation and testing, operations, and post-flight analysis.
Key Responsibilities:
In your capacity as a GNC Engineer, your role will be continuously evolving, but day to day your duties will include to:
Participate in the design and implementation of the AOCS/GNC subsystem of The Exploration Company’ spacecraft for a wide variety of spacecraft and space missions to include LEO operations, Reentry, and Rendezvous and Docking.
Design, synthesis, test, implementation, verification, and validation of GNC algorithms.
Implement the GNC code into the Flight Software.
Develop high fidelity 6 degrees of freedom models and simulations to analyze the system performance.
Perform design, optimization, and dispersion analysis.
Perform multi-disciplinary spacecraft systems trades and investigations to improve The Exploration Company’ spacecraft performance and reliability.
AOCS/GNC hardware specification, selection, modeling and simulation.
Develop software automation tools for GNC design, analysis, testing and reporting.
Validate and verify your GNC software via algorithm unit testing, Monte Carlo analysis, and software-in-the-loop and hardware-in-the-loop testing.
Reporting of test results and analysis, with a focus on efficiency and automation of documentation.
What we would love to see from you:
In the role of GNC Engineer ideally, you will have the following:
MSc. in Aerospace or related engineering discipline. A higher degree is considered advantageous.
Strong understanding of classical dynamics, orbital and flight mechanics.
Strong understanding of control and estimation techniques.
Experience with flight physics simulation.
Software development experience in C++, Python and MATLAB/Simulink.
Passion for advancing the commercial space industry.
Highly motivated to work in a fast paced, autonomously driven, and demanding start-up environment.
Fluent in English. German or French is an asset.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We want you as a highly talented Propulsion AIT Engineer to help us in our mission by leading Assembly, Integration and Test activities on Huracan, our cryogenic engine. This is a hands-on role at the interface between engineering, manufacturing, quality, and test operations. You will help turn propulsion designs into flight-relevant hardware by supporting the build-up and verification of thrust chamber assemblies and complete engines.
Key responsibilities:
In your capacity as a Propulsion AIT Engineer, your role will be continuously evolving, but day to day your duties will include:
Lead the assembly and acceptance testing of Huracan subcomponents, in particular the thrust chamber assembly
Participate in full engine builds, integrating the thrust chamber assembly with the engine structure, fluid components, valves, instrumentation, pumps, piping, and other propulsion subsystems.
Develop detailed assembly procedures, work instructions and manufacturing documentation
Define tooling, fixtures and ground support equipment required for engine assembly
Ensure assemblies comply with cleanliness, contamination control and configuration management requirements
Perform leak checks, pressure testing, functional checks, instrumentation checks, and other verification or acceptance activities under approved procedures and relevant safety controls
Support hot-firing test campaign preparation, including hardware readiness reviews, tooling and equipment checks, procedure walk-downs, and test article closeout
Record build data, inspection results, non-conformities, deviations, rework, and as-built information in the ERP system
Help investigate assembly or integration issues, identify root causes, and implement corrective actions in collaboration with engineering and quality teams
Contribute to the continuous improvement of assembly processes, work instructions, tooling, ergonomics, and production readiness
Qualifications:
Young graduate in aerospace engineering, mechanical engineering, or another related field (master's and above preferred), preferably with rocketry experience or individual projects
What we would love to see from you:
Experience assembling or integrating mechanical systems in a laboratory, workshop, production, or test environment, ideally related to propulsion, pressure systems, fluidic assemblies, or complex hardware
Familiarity with CAD, PLM, ERP, manufacturing execution, or technical documentation systems
Understanding with torque-controlled assembly, cleanliness practices, FOD prevention, leak testing, pressure testing, or dimensional inspection
Understanding of configuration management, non-conformance management, root-cause analysis, and quality documentation
Exposure to manufacturing processes (e.g. machining, welding, additive manufacturing, surface treatments, inspections) and their impact on tolerances and performance is highly valued
Rigor and attention to detail are core values in everything we do: you take the time to understand requirements, follow procedures precisely, check your work, and maintain accurate records.
Comfortable operating in a fast-paced environment, taking ownership of getting the hardware ready
Fluency in English, both written and verbal
Experience working with multidisciplinary teams and communicating clearly about hardware status, risks, and constraints
A passion for space exploration and the motivation to see propulsion hardware move from drawings to tested engines
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We want you as a talented MAIT Additive Manufacturing Engineer to help us in our mission by contributing significantly to Additive Manufacturing (AM) technology, development and in-house production for our Vehicles Nyx Earth and Nyx Moon.
The ideal candidate will play a key role as an Application Engineer, working on the development and qualification of additive manufacturing (AM) processes, including the definition of print parameters for new materials. This role will also involve supporting the certification of AM components to comply with high industry standards, including NASA regulations. .
Role Overview
As an MAIT Additive Manufacturing Engineer, you will play a key role in the development, qualification, and industrialization of Laser Powder Bed Fusion (LPBF) technologies for critical aerospace hardware.
You will support the full lifecycle of aerospace hardware, from manufacturability assessment and process development through qualification, certification, and production readiness. Working closely with Design Engineering, Materials & Processes, Quality, Testing, and Manufacturing teams, you will contribute to the delivery of flight-ready components across TEC's propulsion and space systems programs.
This is a technically demanding role with direct impact on flight hardware development, manufacturing capability, and future production scalability.
Key Responsibilities
Own the manufacturing and qualification of mission-critical flight hardware.
Develop, optimize, and qualify LPBF processes for a range of high-performance alloys.
Define and manage material characterization campaigns, support test execution, and analyze the resulting data.
Take over build preparation, LPBF process simulation, and process monitoring data analysis.
Execute qualification and certification activities for AM hardware in accordance with aerospace requirements and internal quality processes.
Troubleshoot manufacturing challenges and drive continuous improvement in process capability, quality, productivity, and inspection methodologies.
Author technical documentation and collaborate with internal teams, external suppliers, laboratories, and certification bodies.
Required Qualifications
Bachelor's or Master's degree in Mechanical Engineering, Materials Science, Aerospace Engineering, or related field.
Hands-on experience with metal LPBF systems in an industrial environment.
Experience in LPBF process development, material and part verification.
Knowledge in material characterization methodologies, including the selection and interpretation of material property and mechanical testing data.
Proficiency in CAD for part design modification, LPBF build design, and support generation. Experience with Siemens NX and PLM tools such as Teamcenter is a plus.
Strong communication, analytical problem-solving, and effective collaboration across multidisciplinary and international teams.
Fluent in English.
Preferred Qualifications
3+ years of experience in LPBF process and hardware qualification for complex aerospace propulsion systems.
Strong understanding of DFAM principles, LPBF process physics and parameters.
Familiarity with aerospace materials such as nickel-based superalloys, titanium alloys, copper alloys, as well as stainless steels. Refractory alloys is a plus.
Hands-on experience in machine operation, material characterization, including metallography, microstructural characterization, and mechanical testing.
Proficiency in additive manufacturing process simulation solutions.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are also developing different types of propulsion systems to power our future vehicles and missions. As a talented Test Technician, you will be responsible for supporting test activities across the various test benches.
Key Responsibilities / Tasks:
In your capacity as a Test Technician, your role will be continuously evolving, but day to day your duties will include:
Help develop, prepare, assemble and commission mechanical and fluidic systems of the test benches.
Support integration of instrumentation on the test benches.
Support the team in building a CAD model of the test benches.
Be an active participant in the test benches' maintenance operations.
Act as an operator and monitor test bench systems during test campaigns
Be involved in test and maintenance procedure writing and execution
Handle cryogenic fluids (e.g., LN₂, LOX, CH₄), high-pressure gases, and hazardous operations following strict procedures.
Contribute to safety reviews, risk assessments, and operational readiness checks
Support post-test operations, inspections, and hardware documentation
Be involved in spare part management and procurement for the test benches.
Collaborate closely with multidisciplinary teams and external partners, including design engineers, AIT engineers and technicians, suppliers, and test facility operators, throughout the full test campaign lifecycle
What we would love to see from you:
3+ years experience in Mechanical & Fluidic systems assembly and operations.
Previous experience in the Aeronautic/Aerospace field, ideally in a test environment.
Previous experience with Cryogenic and High-pressure fluids with strong understanding of the risks/consequences involved.
Previous experience with CAD softwares (NX/Teamcenter or equivalent).
Solution oriented mindset, rigorous, safety-conscious, and detail-oriented
Good communication skills and ability to work in a multidisciplinary team
Comfortable working in outdoor or industrial environments and with PPE
Basic instrumentation, data acquisition and test monitoring experience (e.g. LabVIEW)
Intermediate working proficiency in English. French is an asset
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
To support our growth, we are looking for a CAD & PLM Administration Intern to join our team in Munich. In this hands-on role, you will help establish and maintain our CAD standard part library, provide first-level support to engineering users, and contribute to the documentation of CAD and PLM processes.
As a CAD & PLM Administration Intern, you will work closely with our engineering, CAD, PLM, and IT teams to help keep our design data and product lifecycle processes organised, accessible, and efficient.
Your primary focus will be supporting the creation and continuous improvement of a standard part library for CAD users. You will also act as a first point of contact for basic user requests and help create clear, practical documentation that enables our engineering teams to work effectively in a fast-paced aerospace environment.
This is an excellent opportunity to gain practical experience in CAD data management, PLM administration, engineering processes, and technical support while contributing to the development of a real space vehicle.
Support the creation, organisation, and maintenance of structured CAD and PLM data.
Support the setup and maintenance of CAD templates, standard part libraries, drafting standards, preferences, and other engineering environment settings.
Work with engineers and designers to identify opportunities to improve CAD workflows, data quality, reuse, and user experience.
Assist with testing and documenting changes to CAD and PLM processes, configurations, and system settings.
Gain hands-on experience with Siemens NX administration, including configuration concepts, customer defaults, role-based settings, templates, and environment configuration.
Learn about Siemens NX customization and automation possibilities under the guidance of experienced team members, for example through journals, reusable tools, interface settings, or workflow improvements.
Contribute to guidelines and best practices for CAD and PLM usage, including the appropriate use of standard parts and reusable engineering content.
Create and maintain user guides, how-to instructions, process descriptions, and FAQs.
Document CAD and PLM procedures in a clear and accessible way.
Support the preparation of training material for new and existing users.
Assist with routine administration and monitoring tasks in the CAD and PLM environment under supervision.
Support users and create documentation based on frequent support requests
Work with engineering, PLM, CAD, and IT colleagues to improve data quality and user experience.
Currently enrolled in a Bachelor's or Master's programme in Mechanical Engineering, Aerospace Engineering, Computer Science, Information Technology, or a related field.
Good communication skills in English.
Basic experience with Siemens NX and strong interest in CAD, engineering data management, PLM, or technical systems administration.
Organised, detail-oriented, and comfortable working with structured data and technical information.
A proactive, hands-on attitude and willingness to learn.
Comfortable working collaboratively in a multidisciplinary team.
Basic familiarity with PLM concepts or systems such as Siemens Teamcenter.
Experience with C# and .Net, Powershell
Basic understanding of engineering drawing standards, part numbering, metadata, or configuration management.
Some exposure to Linux, IT infrastructure, databases, or technical support processes.
Interest in aerospace, spacecraft, or other complex technical environments.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
As an intern for The Exploration Company (TEC), you will be at the forefront of our crewed vehicle development. You will be instrumental in enabling our mission by designing, developing, testing, and improving engineering systems and technology.
Key Responsibilities:
Collaborate with engineers to design, develop, test, and improve products, systems, or processes.
Contribute to real-world engineering projects and deliverables under the guidance of a mentor.
Apply engineering principles and coursework to solve technical problems.
Develop, test, debug, and document technical solutions, tools, or prototypes.
Analyze data, identify trends, and provide recommendations to support engineering decisions.
Participate in design reviews, team meetings, and technical discussions.
Create and maintain technical documentation, reports, and project updates.
Support testing, validation, and quality assurance activities.
Basic requirements:
Pursuing a bachelor's, master's, or doctoral degree in Engineering or a related technical field.
Three months or more of relevant engineering experience through prior internships, co-op programs, or industry projects.
Due to federal regulations (e.g., ITAR/EAR), applicants must be U.S. citizens or lawful permanent residents (e.g., current Green Card holders)
Preferred skills and experience:
Cumulative GPA of 3.5 or above
Six months or more of relevant engineering experience through prior internships, co-op programs, or industry projects.
Experience working collaboratively in a team environment.
Demonstrated hands-on experience through academic projects, student organizations, internships, research, personal projects, or technical hobbies.
Strong problem-solving, analytical, and communication skills.
Ability to work independently, take initiative, and manage multiple priorities in a fast-paced environment.
Passion for learning new technologies and applying engineering principles to real-world challenges.
Experience working collaboratively in a team environment.
Proficiency with relevant engineering tools, programming languages, or technical platforms related to the role.
Additional Requirements:
Able to work full-time (40 hours per week) for a minimum of 12 weeks beginning January 2027
Able to provide your own relocation and housing
Note: Housing and relocation are not provided
Location: Houston, TX
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
As an intern for The Exploration Company (TEC), you will be at the forefront of our crewed vehicle development. You will be instrumental in enabling our mission by designing, developing, testing, and improving engineering systems and technology.
Key Responsibilities:
Collaborate with engineers to design, develop, test, and improve products, systems, or processes.
Contribute to real-world engineering projects and deliverables under the guidance of a mentor.
Apply engineering principles and coursework to solve technical problems.
Develop, test, debug, and document technical solutions, tools, or prototypes.
Analyze data, identify trends, and provide recommendations to support engineering decisions.
Participate in design reviews, team meetings, and technical discussions.
Create and maintain technical documentation, reports, and project updates.
Support testing, validation, and quality assurance activities.
Basic requirements:
Pursuing a bachelor's, master's, or doctoral degree in Engineering or a related technical field.
Three months or more of relevant engineering experience through prior internships, co-op programs, or industry projects.
Due to federal regulations (e.g., ITAR/EAR), applicants must be U.S. citizens or lawful permanent residents (e.g., current Green Card holders)
Preferred skills and experience:
Cumulative GPA of 3.5 or above
Six months or more of relevant engineering experience through prior internships, co-op programs, or industry projects.
Experience working collaboratively in a team environment.
Demonstrated hands-on experience through academic projects, student organizations, internships, research, personal projects, or technical hobbies.
Strong problem-solving, analytical, and communication skills.
Ability to work independently, take initiative, and manage multiple priorities in a fast-paced environment.
Passion for learning new technologies and applying engineering principles to real-world challenges.
Experience working collaboratively in a team environment.
Proficiency with relevant engineering tools, programming languages, or technical platforms related to the role.
Additional Requirements:
Able to work full-time (40 hours per week) for a minimum of 12 weeks beginning January 2027
Able to provide your own relocation and housing
Note: Housing and relocation are not provided
Location: Los Angeles, CA
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
As an intern for The Exploration Company (TEC), you will be at the forefront of our crewed vehicle development. You will be instrumental in enabling our mission by designing, developing, testing, and improving engineering systems and technology.
Key Responsibilities:
Collaborate with engineers to design, develop, test, and improve products, systems, or processes.
Contribute to real-world engineering projects and deliverables under the guidance of a mentor.
Apply engineering principles and coursework to solve technical problems.
Develop, test, debug, and document technical solutions, tools, or prototypes.
Analyze data, identify trends, and provide recommendations to support engineering decisions.
Participate in design reviews, team meetings, and technical discussions.
Create and maintain technical documentation, reports, and project updates.
Support testing, validation, and quality assurance activities.
Basic requirements:
Pursuing a bachelor's, master's, or doctoral degree in Engineering or a related technical field.
Three months or more of relevant engineering experience through prior internships, co-op programs, or industry projects.
Due to federal regulations (e.g., ITAR/EAR), applicants must be U.S. citizens or lawful permanent residents (e.g., current Green Card holders)
Preferred skills and experience:
Cumulative GPA of 3.5 or above
Six months or more of relevant engineering experience through prior internships, co-op programs, or industry projects.
Experience working collaboratively in a team environment.
Demonstrated hands-on experience through academic projects, student organizations, internships, research, personal projects, or technical hobbies.
Strong problem-solving, analytical, and communication skills.
Ability to work independently, take initiative, and manage multiple priorities in a fast-paced environment.
Passion for learning new technologies and applying engineering principles to real-world challenges.
Experience working collaboratively in a team environment.
Proficiency with relevant engineering tools, programming languages, or technical platforms related to the role.
Additional Requirements:
Able to work full-time (40 hours per week) for a minimum of 12 weeks beginning May 2027
Able to provide your own relocation and housing
Note: Housing and relocation are not provided
Location: Houston, TX
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
As an intern for The Exploration Company (TEC), you will be at the forefront of our crewed vehicle development. You will be instrumental in enabling our mission by designing, developing, testing, and improving engineering systems and technology.
Key Responsibilities:
Collaborate with engineers to design, develop, test, and improve products, systems, or processes.
Contribute to real-world engineering projects and deliverables under the guidance of a mentor.
Apply engineering principles and coursework to solve technical problems.
Develop, test, debug, and document technical solutions, tools, or prototypes.
Analyze data, identify trends, and provide recommendations to support engineering decisions.
Participate in design reviews, team meetings, and technical discussions.
Create and maintain technical documentation, reports, and project updates.
Support testing, validation, and quality assurance activities.
Basic requirements:
Pursuing a bachelor's, master's, or doctoral degree in Engineering or a related technical field.
Three months or more of relevant engineering experience through prior internships, co-op programs, or industry projects.
Due to federal regulations (e.g., ITAR/EAR), applicants must be U.S. citizens or lawful permanent residents (e.g., current Green Card holders)
Preferred skills and experience:
Cumulative GPA of 3.5 or above
Six months or more of relevant engineering experience through prior internships, co-op programs, or industry projects.
Experience working collaboratively in a team environment.
Demonstrated hands-on experience through academic projects, student organizations, internships, research, personal projects, or technical hobbies.
Strong problem-solving, analytical, and communication skills.
Ability to work independently, take initiative, and manage multiple priorities in a fast-paced environment.
Passion for learning new technologies and applying engineering principles to real-world challenges.
Experience working collaboratively in a team environment.
Proficiency with relevant engineering tools, programming languages, or technical platforms related to the role.
Additional Requirements:
Able to work full-time (40 hours per week) for a minimum of 12 weeks beginning May 2027
Able to provide your own relocation and housing
Note: Housing and relocation are not provided
Location: Los Angeles, CA
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are seeking a talented Fluid Systems Development Engineer to join the Storm engine project. As a key member of our System Team, you will play a central role in developing key fluid systems of the engine.
As a Fluid Systems Development Engineer, your responsibilities will include:
Translate engine-level functional and performance requirements into fluid-system requirements, architectures, and development priorities.
Lead architecture trade-off studies, sensitivity analyses, and risk assessments to support robust design decisions.
Define and manage the development roadmap for fluid-system sub-assemblies, from concept through maturation and qualification.
Lead the design of fluid systems and the selection, development, and integration of their components, including make-or-buy decisions.
Define and manage the verification and validation strategy, including requirements, test specifications, acceptance criteria, and evidence of compliance.
Design and specify the pneumatic equipment required to support demonstrator test campaigns and test-article operations.
Analyse test data to assess system performance, identify discrepancies, and validate and anchor fluid-system models.
Feed test results and lessons learned back into system design, requirements, and future development activities.
Master's Degree or higher (or NZ and AUS \"Bachelor with honors\") in Mechanical Engineering, Aerospace Engineering, or a related and applicable technical discipline. Alternatively, a bachelor's degree with substantial relevant experience
Minimum 2 years of proven experience developing propulsion fluid systems
Strong knowledge of fluid dynamics, thermodynamics and cryogenic fluids
Good knowledge of fluid components (check-valves, pressure regulators...)
Fluency in English; proficiency in German or French is an asset
Basic knowledge of aerospace standards (e.g. ECSS, NASA guidelines)
Experience writing scripts in Python
Experience using 3D CAD software (Siemens NX is an asset)
(Optional) Experience with modelling and simulation tools is a plus (e.g. EcosimPro)
(Optional) Hands-on experience developing hardware from concept to working prototypes is an asset
Skills and Behaviors
Strong ability to work in close collaboration with others
Strong oral and written communication skills
Strong analysis and problem-solving skills
Strong research skills and ability to infer useful information from partial or even contradictory sources
Drive towards excellence coupled with ability to work within time constraints
Proficiency in organization and prioritization of tasks
Behavior consistent with The Exploration Company’s core values of Mission, Vision, Integrity, Excellence and Teamwork
Enthusiasm for space exploration: be ready to have an impact on the future global space industry.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We want you as a talented MAIT Additive Manufacturing Materials Intern to help us in our mission by contributing to Additive Manufacturing (AM) materials development, qualification, and in-house production for our vehicles Nyx Earth, Nyx Moon, and Storm.
The ideal candidate will support the development and qualification of materials for additive manufacturing applications. This includes supporting material characterization campaigns, powder management, process parameter development, quality activities, and technical manufacturing documentation.
Role Overview
As a MAIT Additive Manufacturing Materials Intern, you will gain hands-on experience across the lifecycle of critical spaceflight hardware, from early development stages through qualification and production. You will support the development, characterization, qualification, and industrialization of materials for Laser Powder Bed Fusion (LPBF) technologies. You will contribute to material characterization campaigns, new alloy development, powder management, process parameter development, manufacturing documentation, and quality-related activities.
Working as part of the LPBF Team and closely in collaboration with the AM Operations Team, as well as Propulsion and Quality teams, you will help us advance our additive manufacturing capabilities and support the delivery of flight-ready components across TEC's propulsion, launch vehicle, and space systems programs.
Key Responsibilities
Support material characterization campaigns with internal test laboratories, external testing partners and assist in the analysis and interpretation of powder, metallurgical, microstructural, and mechanical testing data.
Support materials and process development activities, including alloy development, process parameter development, material characterization, and heat treatment optimization.
Assist with LPBF build preparation, process monitoring, and post-build evaluation.
Operate LPBF machines and associated equipment as required and following appropriate training.
Prepare structured build reports and material test data summaries, ensuring consistent documentation.
Support the creation and continuous improvement of work instructions, manufacturing procedures, qualification documentation, and standardized reporting templates.
Support quality improvement activities, including non-conformance investigation support, data collection, and corrective action tracking.
Required Qualifications
Currently pursuing a Bachelor's or Master's degree in Materials Science, Materials Engineering, Metallurgy, Mechanical Engineering, Aerospace Engineering, or a related field.
Good fundamentals in materials science, material characterization methodologies, and mechanical testing.
Strong interest in additive manufacturing technologies and aerospace applications.
Strong analytical, organizational, and problem-solving skills.
Attention to detail and the ability to document technical work clearly and consistently.
Ability to work effectively within multidisciplinary and international teams.
Fluent in English.
Preferred Qualifications
Completed a Bachelor's or Master's degree in Materials Science, Materials Engineering, Metallurgy, Mechanical Engineering, Aerospace Engineering, or a related field.
Experience with LPBF technology.
Experience with metallography, microscopy, powder characterization, or mechanical testing.
Knowledge of aerospace materials such as nickel-based superalloys, titanium alloys, copper alloys, and stainless steels.
Experience working in a laboratory, manufacturing, or research environment.
Experience preparing laboratory reports, build reports, work instructions, test documentation, or technical procedures.
Skilled in Excel, Python, R, or similar tools for data analysis and visualization.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We want you as a talented systems engineer to help us in our mission by leading the integration and certification process for the Nyx missions to the International Space Station (ISS), ensuring compliance with NASA's requirements and standards.
You will oversee all aspects of the process from development of the certification plan to final certification, ensuring that NYX spacecraft design and operations meet NASA’s rigorous interface, safety, operations and verification requirements.
Key Responsibilities
In your capacity as the ISS Integration & Certification Senior Engineer, your role will continuously evolve, but you will be responsible for leading all aspects of integration and certification of the Nyx spacecraft for missions to the ISS. This role demands a strong blend of technical expertise, project management skills, and experience in the aerospace industry to ensure the integration process is completed on time, within budget, and to the highest quality standards.
Coordinate the end-to-end integration and certification process for the Nyx Earth missions to the ISS, including development and management of the certification plan, ensuring alignment with NASA requirements and Nyx project milestones and schedules
Coordinate with NASA and ESA for all matters related to ISS integration and certification. Coordinate NASA and ESA participation in major Nyx life cycle reviews
In collaboration with the Nyx Engineering team, implement the Nyx/ISS Bilateral Integration and Verification Plan, including related joint activities and data item deliverables associated with ISS certification.
Support the Nyx Safety process and safety reviews, including hazard control development and verification
In collaboration with the Nyx Engineering team, track execution of Nyx verification and validation activities, particularly items of verification and validation associated with ISS requirements. Coordinate verification and validation reports and Nyx verification closure within NASA, ESA, and TEC tools and processes
Support Nyx preparation for key joint ISS reviews including the Post-Qualification Review, ISS Integration/Vehicle Acceptance Review, Stage Operations Readiness Review and Flight Readiness Review
Assess and manage risk associated with spacecraft design, operations and integration with ISS, develop and execute risk mitigation strategies and track risk mitigation actions
What we would love to see from you
Bachelor’s degree in systems engineering, aerospace engineering, or another related field
5 to 10 years of experience working in aerospace systems engineering with at least 3 years in ISS Visiting Vehicle integration, operations and/or certification being highly valued
Knowledge of general spacecraft systems engineering, safety and operations products and processes
Ability to integrate diverse inputs on complex technical topics and synthesize solutions and forward plans that address stakeholder needs
Ability to work collaboratively with technical personnel from across the company and create high trust relationships with government employees and customers
Equal Employment Opportunity
The Exploration Company is an Equal Opportunity Employer; employment with The Exploration Company is governed based on merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of The Exploration Company’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify the Human Resources Department at people@exploration.space.
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.
Here at The Exploration Company, we are building innovative aerospace technologies that advance the future of space transportation.
We are looking for a Senior Embedded Software Engineer with deep expertise in low-level platform bring-up and RT-OS tailoring for embedded real-time applications. You will own the full software stack from bootloader, BSP, OS, and application. You will establish and maintain the toolchain and CI infrastructure that underpins our embedded platforms development.
You are comfortable owning the entire platform software stack independently. You have brought up a (safety critical) MCU from scratch, debugged obscure failures with a debug probe (e.g. JTAG), serial console, logic analyser, or oscilloscope. You instinctively collaborate closely with the hardware team on the platform design and with the application stakeholders on requirements.
As a Senior Embedded Software Engineer, your role and responsibilities will continuously evolve. Your initial duties include to:
Bring-up the RTOS and develop the BSP for ARM Cortex-M cores, including MPU configuration and inter-core communication
Develop, test and maintain an extensive set of MCU drivers to fulfill application's needs (ADC, SPI, Clock and more)
Develop complete communication stack, validate its integration in host system
Develop drivers for complex ICs
Integration test MCU and FPGA interfaces
Set-up toolchain and CI for the MCU and wider embedded platform (HiL, automated test equipment control...)
Own design documentation and validate requirements
Coordinate with all disciplines working on a unit (electronics design engineers, system engineers, test team, EGSE team)
Continuous learning: stay current with industry trends, emerging technologies, and advancements in avionics design
In the role of Senior Embedded Software Developer ideally, you will have the following:
Bachelor's or Master's degree in Electrical Engineering, Embedded Systems, Software Engineering, Aerospace Engineering, or a related field
Strong background in embedded C / C++ coding
RTOS bring-up experience on Cortex-M cores (ThreadX / Azure RTOS, FreeRTOS, Zephyr, or equivalent)
Hands-on experience in firmware development and platform bring-up
Hands-on experience in various communication protocols/stacks (SPI, I2C, UART, Ethernet IP/TCP).
Knowledge of safety-critical design principles
Familiarity with Reliability, Availability, Maintainability & Safety (RAMS) aspects
Strong verbal and written communication skills. Ability to collaborate effectively with multidisciplinary teams (hardware engineers, test engineers, EGSE engineers, etc.)
Meticulous attention to detail in design, analysis, and documentation
Hands on mentality at testing and problem debugging in laboratory
Experience designing and maintaining CI/CD pipelines for embedded hardware targets is a plus
Experience with TSN is a plus
Experience with FPGA and VHDL language is a plus
Experience with python and bash is a plus
Understanding of space relevant standards (like ECSS, MIL-STD, NASA-HBK) and regulations is a plus
Awareness of functional safety standards (ISO 26262, DO-178C, or similar) and their implications for the software stack is a plus
Why you should join us!
What makes us special here at The Exploration Company and why we think you will enjoy working here is:
We’re Agile - we make decisions fast whilst keeping our goals and systems in mind
We’re Open and Collaborative - we are transparent about risks and obstacles, so that we can cooperate to overcome them
We have a lot of Fun - we refuel our energy knowing we are democratising space. It’s a wonderful and rare opportunity, are YOU up for the challenge?
We'd love to hear from you if you wish to be a part of our journey. Please submit your CV now for immediate consideration and we will be in touch shortly.
The Exploration Company is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status or disability status. Relocation assistance is provided for those willing to relocate including visa sponsorship where applicable.
All offers are contingent upon the successful completion of a background check, which will be subject to the country, role, and project you applied for. By submitting your application, you acknowledge and agree that any offer of employment may be conditional upon successful condition of this check. The Exploration Company partners with Zinc Work Limited located in the UK (Zinc), a third-party provider, to ensure this process as efficient and transparent as possible.
If applicable, you will receive an email from Zinc upon acceptance of your offer with a link to a secure portal where you can provide the required information to Zinc.